This page lists 10 ignition parts for the 2025 BMW X6, across 3 part types, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
On the 2025 BMW X6, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 10 listed parts are Crankshaft Position Sensor (4 parts), Ignition Coil (4 parts) and Camshaft Position Sensor (2 parts).
The 2025 BMW X6 was sold with both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
8 brands supply ignition parts for the 2025 BMW X6, led by WELLS (3 parts), HELLA (1 part) and HOLSTEIN (1 part), plus 5 more brands. Quality grades include Standard Replacement, Economy and Premium.
Each part number listed for the 2025 BMW X6 opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HELLA Fits: 4.4L V8 Turbocharged | 009168571 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3-Pin ConnectorIncludes Seal | View on Amazon |
| WELLS Fits: 4.4L V8 Turbocharged | 5S16928 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Camshaft Position Sensor parts for the 2025 BMW X6 come from 2 brands — HELLA and WELLS.
Part numbers include HELLA 009168571 and WELLS 5S16928.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN Fits: 4.4L V8 Turbocharged | 2CRK0712 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.4L V8 Turbocharged | PC1197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 4.4L V8 Turbocharged | 2352068 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS Fits: 4.4L V8 Turbocharged | 5S16172 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
4 Crankshaft Position Sensor parts for the 2025 BMW X6 come from 4 brands — HOLSTEIN, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.
The Economy section lists 1 option from HOLSTEIN — the catalog's value-priced group. HOLSTEIN 2CRK0712 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS supply 3 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS PC1197.
Listed part numbers: HOLSTEIN 2CRK0712, STANDARD MOTOR PRODUCTS PC1197 and WALKER PRODUCTS 2352068, plus the other parts above.
Ignition Coil
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DELPHI Fits: 4.4L V8 Turbocharged | GN11142 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 4.4L V8 Turbocharged | 1788622 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BOSCH Fits: 4.4L V8 Turbocharged | 0986221148 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 4.4L V8 Turbocharged | 5C2367 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
4 Ignition Coil parts for the 2025 BMW X6 come from 4 brands — DELPHI, BECK/ARNLEY, BOSCH and 1 other brand.
In the Premium grade, DELPHI supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is DELPHI GN11142.
Standard Replacement: 3 parts, from BECK/ARNLEY, BOSCH and WELLS. A representative part number is BECK/ARNLEY 1788622.
Part numbers include DELPHI GN11142, BECK/ARNLEY 1788622 and BOSCH 0986221148, among others listed above.
Buying Ignition Parts for a 2025 BMW X6
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Position Sensor and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2025 BMW X6?
Our catalog currently lists 10 ignition parts for the 2025 BMW X6 across 3 subcategories and 8 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2025 BMW X6 engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2025 BMW X6?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 BMW X6 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 BMW X6?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 BMW X6
Ignition Parts for Other BMW X6 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.