1992 Buick Regal Engine Parts

This table covers the Balance Shaft sprockets. Read more

4 Balance Shaft Sprocket parts are listed for the 1992 Buick Regal, from CLOYES, FVP, INA and 1 other brand.

Listed part numbers: CLOYES 2551 and INA ZS2551, plus the other parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Camshaft Bearing parts are listed for the 1992 Buick Regal, from DURA-BOND and ENGINETECH. DURA-BOND B13 carries the "Popular" badge.

This group includes DURA-BOND B13, DURA-BOND B13R and DURA-BOND BP13 and the remaining parts above.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 1992 Buick Regal — DORMAN 570012.

This table covers the Camshaft Thrust buttons. Read more

PIONEER supplies the 4 Camshaft Thrust Button parts for the 1992 Buick Regal.

This group includes PIONEER 500007, PIONEER 500006 and PIONEER 839008 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts are listed for the 1992 Buick Regal, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 2 other brands. ENGINETECH BB624J carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6664XP.

The Standard Replacement section lists 9 options from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 2 other brands — built to original-equipment specification. ENGINETECH BB624J is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 1992 Buick Regal, from APEX, ELRING, FEL-PRO and 1 other brand.

This group includes APEX ACS3055, ELRING 696820 and FEL-PRO CS9644 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 1992 Buick Regal — ENGINETECH 103500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 1992 Buick Regal come from 4 brands — SEALED POWER, ENGINETECH, GM GENUINE and 1 other brand. The "Popular" part is SEALED POWER 7144MA.

The High Performance section: 1 option from SEALED POWER. SEALED POWER 107M is listed in this group.

Standard Replacement: 4 parts, from SEALED POWER, ENGINETECH, GM GENUINE and 1 other brand. A representative part number is SEALED POWER 7144MA.

Part numbers include SEALED POWER 7144MA, SEALED POWER 107M and ENGINETECH BC450J, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 1992 Buick Regal — GM GENUINE 24503056.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 1992 Buick Regal — VICTOR REINZ 711348200.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 1992 Buick Regal come from 5 brands — TIMKEN, WJB / INMOTION PARTS, FEL-PRO and 2 other brands. The "Popular" part is TIMKEN KWK99193.

Part numbers include TIMKEN KWK99193, WJB / INMOTION PARTS WS99193 and FEL-PRO 16276, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts for the 1992 Buick Regal come from 12 brands — TIMKEN, WJB / INMOTION PARTS, FEL-PRO and 9 other brands. The "Popular" part is FEL-PRO BS40649.

This table covers the Cylinder Head Alignment Dowel pins. Read more

PIONEER supplies the 3 Cylinder Head Alignment Dowel Pin parts for the 1992 Buick Regal.

This group includes PIONEER S1110, PIONEER PG225 and PIONEER PG651.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 1992 Buick Regal, from PIONEER, APEX, GM GENUINE and 1 other brand. APEX AHB353 carries the "Popular" badge.

Listed part numbers: APEX AHB353, GM GENUINE 88891770 and MAHLE / CLEVITE GS33233, plus the other parts above.

This table covers the Cylinder Head Bolt washers. Read more

One part is listed for the 1992 Buick Regal — PIONEER S1018.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 1992 Buick Regal, from ELRING, CORTECO, FEL-PRO and 2 other brands. CORTECO 20686GR carries the "Popular" badge.

Listed part numbers: CORTECO 20686GR, FEL-PRO 9644PT and APEX AHG353, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 1992 Buick Regal, from ENGINETECH, APEX, FEL-PRO and 2 other brands. APEX AHS3056 carries the "Popular" badge.

Listed part numbers: APEX AHS3056, FEL-PRO HS9644PT1 and ENGINETECH B38HSG, plus the other parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Cylinder Head Plug parts for the 1992 Buick Regal come from DORMAN.

This group includes DORMAN 565019, DORMAN 570006 and DORMAN 116203.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

4 Cylinder Repair Sleeve parts are listed for the 1992 Buick Regal, from MELLING and ENGINETECH.

Part numbers include ENGINETECH ESL1101, MELLING CSL138 and MELLING CSL138X, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 1992 Buick Regal come from 2 brands — KAT'S HEATERS and TEMRO.

Listed part numbers: KAT'S HEATERS 11416 and TEMRO 3100041.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 1992 Buick Regal, from ENGINETECH and MAHLE / CLEVITE.

Part numbers include ENGINETECH B38C81 and MAHLE / CLEVITE 953164.

This table covers the Engine rebuild kits. Read more

One part is listed for the 1992 Buick Regal — ENGINETECH RCB3800BP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 1992 Buick Regal come from 3 brands — ENGINETECH, QUALCAST and SBI.

Part numbers include ENGINETECH V2317, QUALCAST 101710 and SBI 01710.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

13 Expansion Plug parts are listed for the 1992 Buick Regal, from DORMAN, PIONEER, ENGINETECH and 1 other brand. DORMAN 555077 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 1992 Buick Regal, from DAYCO, PIONEER, ATP and 1 other brand. DAYCO PB1083N carries the "Popular" badge.

High Performance: 1 part, from DAYCO. A representative part number is DAYCO PBO81083SS5.

The Standard Replacement section: 5 options from PIONEER, DAYCO, ATP and 1 other brand. DAYCO PB1083N is listed in this group.

Listed part numbers: DAYCO PB1083N, DAYCO PBO81083SS5 and ATP 102072, plus the other parts above.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: GM GENUINE 24504736.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: PIONEER HB4121.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 1992 Buick Regal, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AMS3561, FEL-PRO MS949181 and MAHLE / CLEVITE MS16202, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts for the 1992 Buick Regal come from 3 brands — APEX, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: APEX AMS3560, FEL-PRO MS95830 and MAHLE / CLEVITE MS14638.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 1992 Buick Regal come from 3 brands — ENGINETECH, QUALCAST and SBI.

This group includes ENGINETECH V2274, QUALCAST 101711 and SBI 01711.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts for the 1992 Buick Regal come from 8 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 5 other brands. The "Popular" part is CORTECO MT2697.

The Economy section lists 5 options from CORTECO, ANCHOR, AUTO EXTRA and 2 other brands — the catalog's value-priced group. CORTECO MT2697 is listed in this group.

Standard Replacement: 11 parts, from DEA / MARMON RIDE CONTROL, PIONEER, WESTAR and 1 other brand. A representative part number is ANCHOR 2697.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

19 Oil parts for the 1992 Buick Regal come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195.

The Conventional section lists 2 options from VALVOLINE — grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. VALVOLINE 797578 is listed in this group.

The Full Synthetic section lists 7 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 8 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.

The Synthetic Blend section lists 2 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1992 Buick Regal.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1992 Buick Regal — ELRING 584210.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 1992 Buick Regal come from 4 brands — DORMAN, AGS, ELRING and 1 other brand. The "Popular" part is AGS ODP00016.

Part numbers include AGS ODP00016, DORMAN 090052 and DORMAN 090031, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Oil Drain Plug Gasket parts are listed for the 1992 Buick Regal, from DORMAN, ULTRA-POWER, MAHLE / CLEVITE and 5 other brands. MAHLE / CLEVITE 2051 carries the "Popular" badge.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 1992 Buick Regal come from 3 brands — GATES, MOTORAD and SKP.

Part numbers include GATES 31103, MOTORAD MO99 and SKP SKMO99.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Filler Cap Gasket parts are listed for the 1992 Buick Regal, from ELRING, FEL-PRO and GM GENUINE.

Listed part numbers: ELRING 823620, ELRING 592250 and FEL-PRO 73193, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 1992 Buick Regal come from 13 brands — BOSCH, CHAMP / LUBER-FINER, FRAM and 10 other brands. The "Popular" part is BOSCH 72132WS.

The Economy section: 6 options from BOSCH, CHAMP / LUBER-FINER, FRAM and 3 other brands. BOSCH 72132WS is listed in this group.

The High Performance / Heavy Duty section lists 4 options from ACDELCO, FRAM, MOBIL and 1 other brand — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. ACDELCO UPF47R is listed in this group.

Standard Replacement: 10 parts, from HENGST, ACDELCO, WIX and 6 other brands. A representative part number is ACDELCO PF47E.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 1992 Buick Regal, from GM GENUINE and MAHLE / CLEVITE.

Part numbers include GM GENUINE 25534742 and MAHLE / CLEVITE B31639.

This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Oil Filter Bypass Valve parts for the 1992 Buick Regal come from 2 brands — DORMAN and GM GENUINE.

Listed part numbers: DORMAN 927841 and GM GENUINE 19542299.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Filter Gasket parts are listed for the 1992 Buick Regal, from APEX, FEL-PRO and VICTOR REINZ.

Listed part numbers: APEX AOM6003, FEL-PRO 70644 and VICTOR REINZ 711350600.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

5 Oil Level Sensor parts for the 1992 Buick Regal come from 5 brands — ACDELCO, GM GENUINE, HOLSTEIN and 2 other brands. The "Popular" part is ACDELCO D8055.

Part numbers include ACDELCO D8055, GM GENUINE 12603782 and HOLSTEIN 2OLS0002, among others listed above.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: GM GENUINE 10151633.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 1992 Buick Regal, from SPECTRA PREMIUM, ATP, SKP and 1 other brand. SPECTRA PREMIUM GMP24A carries the "Popular" badge.

Listed part numbers: SPECTRA PREMIUM GMP24A, ATP 103107 and SKP SK264160, plus the other parts above.

This table covers the Oil Pan bolts. Read more

2 Oil Pan Bolt parts for the 1992 Buick Regal come from 2 brands — GM GENUINE and PIONEER.

Listed part numbers: GM GENUINE 9440224 and PIONEER 854006.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 1992 Buick Regal come from 5 brands — FEL-PRO, APEX, ELRING and 2 other brands. The "Popular" part is FEL-PRO OS30522T.

Part numbers include FEL-PRO OS30522T, FEL-PRO OS30522R and APEX AOP353, among others listed above.

This table covers the pickup tubes and screens that feed the oil pump. Read more

3 Oil Pump Pickup Tube / Screen parts are listed for the 1992 Buick Regal, from ENGINETECH, MELLING and SEALED POWER.

Listed part numbers: ENGINETECH S256S, MELLING 256S and SEALED POWER 22414280.

This table covers the Oil Pump repair kits. Read more

2 Oil Pump Repair Kit parts are listed for the 1992 Buick Regal, from ENGINETECH and MELLING.

Listed part numbers: ENGINETECH EK135 and MELLING K135.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts are listed for the 1992 Buick Regal, from ENGINETECH and SEALED POWER.

Part numbers include ENGINETECH P1581, ENGINETECH K15816P and SEALED POWER H558P.