1992 Buick Regal Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

23 Alignment Bolt / Camber Plate parts for the 1992 Buick Regal come from 9 brands — MEVOTECH, MOOG, SKP and 6 other brands. The "Popular" part is MEVOTECH MS50201.

In the Daily Driver grade, MEVOTECH, MOOG, ACDELCO and 1 other brand supply 10 parts: grouped for everyday commuting duty. A representative part number is MEVOTECH MS50201.

The Economy section lists 13 options from SKP, DORMAN, FVP and 3 other brands — the catalog's value-priced group. SKP SK100024 is listed in this group.

This table covers the Alignment shims. Read more

2 Alignment Shim parts are listed for the 1992 Buick Regal, from ACDELCO and MOOG.

Listed part numbers: ACDELCO 45K0097 and MOOG K100264.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

10 Ball Joint parts for the 1992 Buick Regal come from 9 brands — MEVOTECH, MOOG, DORMAN and 6 other brands. The "Popular" part is MOOG K5301.

Daily Driver: 5 parts, from MOOG, DORMAN, MEVOTECH and 2 other brands. A representative part number is MOOG K5301.

The Economy section: 5 options from ULTRA-POWER, FVP, MEVOTECH and 2 other brands. ULTRA-POWER K5301 is listed in this group.

This table covers the bump stops that limit suspension travel. Read more

One part is listed for the 1992 Buick Regal — DORMAN 532637.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1992 Buick Regal — ULTRA-POWER 901921.

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out. Read more

2 Coil Spring parts are listed for the 1992 Buick Regal, from LESJÖFORS and MEVOTECH.

This group includes LESJÖFORS 4112175 and MEVOTECH SMS654V.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

7 Coil Spring Seat / Insulator parts for the 1992 Buick Regal come from 3 brands — DEA / MARMON RIDE CONTROL, MEVOTECH and CENTRIC.

Part numbers include CENTRIC 60862004, DEA / MARMON RIDE CONTROL 4713342 and DEA / MARMON RIDE CONTROL 4713446, among others listed above.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

22 Control Arm parts for the 1992 Buick Regal come from 11 brands — MEVOTECH, DELPHI, DORMAN and 8 other brands. The "Popular" part is DELPHI TC6151.

Daily Driver: 14 parts, from DELPHI, MEVOTECH, DORMAN and 4 other brands. A representative part number is DELPHI TC6151.

The Economy section: 8 options from MEVOTECH, FAMOUS BRAND, SKP and 2 other brands. SKP SK6402 is listed in this group.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

18 Control Arm Bushing parts for the 1992 Buick Regal come from 10 brands — MEVOTECH, DELPHI, MOOG and 7 other brands. The "Popular" part is MEVOTECH MK6364.

Daily Driver: 11 parts, from MEVOTECH, DELPHI, MOOG and 3 other brands. A representative part number is MEVOTECH MK6364.

The Economy section: 7 options from MEVOTECH, DORMAN, MCQUAY-NORRIS and 2 other brands. MCQUAY-NORRIS FB719 is listed in this group.

This table covers the Control Arm nuts. Read more

One part is listed for the 1992 Buick Regal — GM GENUINE 11515744.

This table covers the Leaf Spring bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Leaf Spring Bushing parts for the 1992 Buick Regal come from 2 brands — MEVOTECH and FVP.

Part numbers include FVP BB6544, MEVOTECH MK6544 and MEVOTECH GK6544.

This table covers the Leaf Spring insulators. Read more

2 Leaf Spring Insulator parts are listed for the 1992 Buick Regal, from FAMOUS BRAND and FVP.

Listed part numbers: FAMOUS BRAND RK6544 and FVP BB6544.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

13 Shock / Strut parts for the 1992 Buick Regal come from 8 brands — MONROE, PRT, FCS and 5 other brands. The "Popular" part is GABRIEL M56708.

The Economy section: 6 options from PRT, GABRIEL, MONROE and 2 other brands. GABRIEL M56708 is listed in this group.

The Original Ride Quality section lists 7 options from MONROE, FCS, KYB and 1 other brand — grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. FCS 36C370 is listed in this group.

This table covers complete strut assemblies with the spring already installed. Read more

5 Shock / Strut & Coil Spring Assembly parts for the 1992 Buick Regal come from 5 brands — GSP, PRT, FCS and 2 other brands. The "Popular" part is FCS 1332313.

The Economy section: 2 options from GSP and PRT. GSP 810116 is listed in this group.

The Original Ride Quality section: 3 options from FCS, GABRIEL and TOP NOTCH. FCS 1332313 is listed in this group.

Part numbers include FCS 1332313, GSP 810116 and PRT 814034, among others listed above.

This table covers the Shock / Strut bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Shock / Strut Bearing parts for the 1992 Buick Regal come from 2 brands — DEA / MARMON RIDE CONTROL and MEVOTECH.

Part numbers include DEA / MARMON RIDE CONTROL 4776017P and MEVOTECH MP901986.

This table covers the Shock / Strut bellows. Read more

6 Shock / Strut Bellow parts are listed for the 1992 Buick Regal, from MEVOTECH, MOOG, KYB and 1 other brand. KYB SB104 carries the "Popular" badge.

Part numbers include KYB SB104, MONROE 63633 and MEVOTECH MP63975, among others listed above.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Shock / Strut Mount parts are listed for the 1992 Buick Regal, from KYB, MEVOTECH, MONROE and 8 other brands. GABRIEL 142131 carries the "Popular" badge.

The Daily Driver section: 10 options from KYB, MEVOTECH, MONROE and 3 other brands. GABRIEL 142131 is listed in this group.

Economy: 4 parts, from WESTAR, DEA / MARMON RIDE CONTROL and ULTRA-POWER. A representative part number is DEA / MARMON RIDE CONTROL 4713249.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Strut Bearing Plate insulators. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL 4713059.

This table covers the Strut Mount nuts. Read more

One part is listed for the 1992 Buick Regal — GM GENUINE 11516383.

This table covers the Strut Rod Lock nuts. Read more

This group shows a single part: GM GENUINE 11516383.

This table covers the Subframe bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DORMAN 924005.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

62 Sway Bar Bushing parts for the 1992 Buick Regal come from 11 brands — MEVOTECH, ACDELCO, DELPHI and 8 other brands. The "Popular" part is MEVOTECH MK5248. They are grouped as Daily Driver and Economy, with Daily Driver the largest group at 37 parts from MEVOTECH, ACDELCO, DELPHI and 3 other brands.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

8 Sway Bar Link parts for the 1992 Buick Regal come from 7 brands — MEVOTECH, TRW, DORMAN and 4 other brands. The "Popular" part is TRW JTS777.

Daily Driver: 4 parts, from TRW, DORMAN, MEVOTECH and 1 other brand. A representative part number is TRW JTS777.

The Economy section: 4 options from ULTRA-POWER, FAMOUS BRAND, MEVOTECH and 1 other brand. ULTRA-POWER K80233 is listed in this group.

Listed part numbers: TRW JTS777, DORMAN 542720 and MEVOTECH MK80233, plus the other parts above.

This table covers the Torsion Bar bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Torsion Bar Bushing parts for the 1992 Buick Regal come from 2 brands — FAMOUS BRAND and ULTRA-POWER.

Part numbers include FAMOUS BRAND DWK6544 and ULTRA-POWER K6544.

This table covers the Track Bar bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

MEVOTECH supplies the 4 Track Bar Bushing parts for the 1992 Buick Regal.

The Daily Driver section: 2 options from MEVOTECH. MEVOTECH MS50434 is listed in this group.

Economy: 2 parts, from MEVOTECH. A representative part number is MEVOTECH GS50434.

Part numbers include MEVOTECH MS50434, MEVOTECH MS50435 and MEVOTECH GS50434, among others listed above.

This table covers the Transverse Spring Isolator pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

2 Transverse Spring Isolator Pad parts are listed for the 1992 Buick Regal, from ACDELCO and MOOG.

This group includes ACDELCO 45G15600 and MOOG K6544.