1992 Buick Regal Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

13 Camshaft Position Sensor parts are listed for the 1992 Buick Regal, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, FAMOUS BRAND and 6 other brands. WALKER PRODUCTS 23591205 carries the "Popular" badge.

In the Economy grade, FAMOUS BRAND, HOLSTEIN, PRENCO and 4 other brands supply 7 parts: the catalog's value-priced group. A representative part number is FAMOUS BRAND CSC1326.

In the Full Service Kit grade, WALKER PRODUCTS supplies 1 part: grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. A representative part number is WALKER PRODUCTS 23591205.

The Heavy Duty section lists 1 option from STANDARD MOTOR PRODUCTS — rated for severe service. STANDARD MOTOR PRODUCTS PC5K is listed in this group.

The Standard Replacement section lists 4 options from WALKER PRODUCTS, STANDARD MOTOR PRODUCTS and WELLS — built to original-equipment specification. STANDARD MOTOR PRODUCTS PC5 is listed in this group.

This table covers the interrupter wheels the camshaft sensor reads. Read more

One part is listed for the 1992 Buick Regal — STANDARD MOTOR PRODUCTS PC100.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

12 Crankshaft Position Sensor parts are listed for the 1992 Buick Regal, from WALKER PRODUCTS, STANDARD MOTOR PRODUCTS, PRENCO and 6 other brands. STANDARD MOTOR PRODUCTS PC9T carries the "Popular" badge.

Economy: 5 parts, from STANDARD MOTOR PRODUCTS, PRENCO, SKP and 2 other brands. A representative part number is STANDARD MOTOR PRODUCTS PC9T.

Full Service Kit: 1 part, from WALKER PRODUCTS. A representative part number is WALKER PRODUCTS 23591010.

The Standard Replacement section: 6 options from WALKER PRODUCTS, DELPHI, STANDARD MOTOR PRODUCTS and 2 other brands. DELPHI SS10208 is listed in this group.

This table covers the brackets that mount the Crankshaft Position Sensor. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

2 Crankshaft Position Sensor Bracket parts are listed for the 1992 Buick Regal, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS PCB1 and WELLS 5S1945.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

18 Ignition Coil parts are listed for the 1992 Buick Regal, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 12 other brands. SKP SKIC021 carries the "Popular" badge.

Economy: 7 parts, from SKP, STANDARD MOTOR PRODUCTS, B&B and 4 other brands. A representative part number is SKP SKIC021.

The Premium section lists 2 options from DELPHI and STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. DELPHI GN10123 is listed in this group.

The Standard Replacement section: 9 options from WALKER PRODUCTS, WELLS, UNITED MOTOR PRODUCTS and 4 other brands. UNITED MOTOR PRODUCTS C540 is listed in this group.

This table covers the gaskets that seal the Ignition Coil Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1992 Buick Regal — WELLS 4C3001.

This table covers the seals at the Ignition Coil. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 19260632.

This table covers the Ignition control modules. Read more

9 Ignition Control Module (ICM) parts are listed for the 1992 Buick Regal, from STANDARD MOTOR PRODUCTS, GM GENUINE, WAI GLOBAL and 3 other brands. STANDARD MOTOR PRODUCTS LX364T carries the "Popular" badge.

Economy: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS LX364T.

The Standard Replacement section: 8 options from GM GENUINE, WAI GLOBAL, HOLSTEIN and 3 other brands. HOLSTEIN 2IGM0052 is listed in this group.

Part numbers include STANDARD MOTOR PRODUCTS LX364T, HOLSTEIN 2IGM0052 and GM GENUINE 19435469, among others listed above.

This table covers the lock cylinders in the ignition switch. Read more

3 Ignition Lock Cylinder parts are listed for the 1992 Buick Regal, from DORMAN, STANDARD MOTOR PRODUCTS and WELLS.

Economy: 1 part, from DORMAN. A representative part number is DORMAN 989006.

The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS and WELLS. STANDARD MOTOR PRODUCTS US126LB is listed in this group.

Part numbers include DORMAN 989006, STANDARD MOTOR PRODUCTS US126LB and WELLS 4H1005.

This table covers the assorted fasteners and small hardware listed for this system. Read more

One part is listed for the 1992 Buick Regal — ACDELCO 213281.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

27 Spark Plug parts for the 1992 Buick Regal come from 8 brands — NGK, DENSO, BOSCH and 5 other brands. The "Popular" part is NGK 3951. Copper / Nickel, Double Platinum (lasts up to 3x longer than Copper / Nickel), Iridium (lasts up to 4x longer than Copper / Nickel) and Platinum (lasts up to 2x longer than Copper / Nickel) are all represented, and Copper / Nickel alone accounts for 8 parts.

This table covers the Spark Plug Heat shields. Typical signs include a bent shield rubbing a rotor, or rust-through that leaves the backing open. A rubbing shield will eat a new rotor. Straighten or replace it before the wheel goes back on. Read more

2 Spark Plug Heat Shield parts are listed for the 1992 Buick Regal, from GM GENUINE and UNITED MOTOR PRODUCTS.

Listed part numbers: GM GENUINE 8006 and UNITED MOTOR PRODUCTS 910.

This table covers the non-foulers that space a spark plug away from oil fouling. Read more

One part is listed for the 1992 Buick Regal — DORMAN 42008.

This table covers the Spark Plug wires. Read more

20 Spark Plug Wire parts are listed for the 1992 Buick Regal, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, B&B and 6 other brands. NGK 51217 carries the "Popular" badge.

Economy: 5 parts, from B&B, STANDARD MOTOR PRODUCTS and FAMOUS BRAND. A representative part number is B&B S648403.

The Premium section: 9 options from UNITED MOTOR PRODUCTS, NGK, STANDARD MOTOR PRODUCTS and 1 other brand. NGK 51217 is listed in this group.

The Standard Replacement section: 6 options from STANDARD MOTOR PRODUCTS, ACDELCO, B&B and 2 other brands. ACDELCO 9626D is listed in this group.

This table covers the Tune-Up kits. Read more

One part is listed for the 1992 Buick Regal — UNITED MOTOR PRODUCTS 38638.