This page lists 605 engine parts for the 2009 Buick Lucerne, across 87 part types, covering both the 3.9L V6 and the 4.6L V8. Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 2009 Buick Lucerne covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (31 parts), Oil (31 parts) and Cylinder Head Gasket (22 parts). The other 84 part types cover the remaining 521 parts.
The 2009 Buick Lucerne was sold with both the 3.9L V6 and the 4.6L V8. 81 parts fit every engine; the other 524 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2009 Buick Lucerne engine parts are GM GENUINE (81 parts), MAHLE / CLEVITE (45 parts) and ENGINETECH (38 parts), plus 64 more brands. Quality grades include Standard Replacement, Economy and Premium.
113 parts on this 2009 Buick Lucerne page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO TCS46011 (Camshaft Seal) and APEX ACS3098 (Conversion / Lower Gasket Set). Click any part number to see every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 19301053 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the camshafts that open the valves.
This group shows a single part: GM GENUINE 19301053.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | CC509 | 🇺🇸 US | Full Set | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 89018072 | 🇺🇸 US 🇨🇦 CA | # 2, # 3 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | SH2121S | 🇺🇸 US 🇨🇦 CA | Full Set | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Camshaft Bearing parts for the 2009 Buick Lucerne come from 3 brands — ENGINETECH, GM GENUINE and MAHLE / CLEVITE.
This group includes ENGINETECH CC509, GM GENUINE 89018072 and MAHLE / CLEVITE SH2121S.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | TCS46011 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 01647477 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 4.6L V8 | ATC3680 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 67683 | 🇺🇸 US 🇨🇦 CA | Seal with Retainer Plate | View on Amazon |
| SCHAEFFLER Fits: 4.6L V8 | SS5566 | 🇺🇸 US 🇨🇦 CA | DOHC 32 Valve2.21" I:D X 2.21" O.D. X 0.26" Width | View on Amazon |
| SKF Fits: 4.6L V8 | 6455 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 4.6L V8 | TCS46011 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 811052900 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
8 Camshaft Seal parts are listed for the 2009 Buick Lucerne, from FEL-PRO, GM GENUINE, APEX and 5 other brands. FEL-PRO TCS46011 carries the "Popular" badge.
Listed part numbers: FEL-PRO TCS46011, GM GENUINE 01647477 and APEX ATC3680, plus the other parts above.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | BB129J | 🇺🇸 US | Set | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | BB310J | 🇺🇸 US | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 4.6L V8 | CR8003SI | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | CB1874A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | CB1874A6 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | CB1648P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Pair | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | 84825A | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
7 Connecting Rod Bearing parts for the 2009 Buick Lucerne come from 4 brands — MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand.
This group includes ENGINETECH BB129J, ENGINETECH BB310J and KING ENGINE BEARINGS CR8003SI and the remaining parts above.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 11519680 | 🇺🇸 US 🇨🇦 CA | M9X1X53 | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12552947 | 🇺🇸 US 🇨🇦 CA | MJ9X1.0-4H6HX61.9 LONG | View on Amazon |
This table covers the Connecting Rod bolts.
GM GENUINE supplies both parts for the 2009 Buick Lucerne.
Part numbers include GM GENUINE 11519680 and GM GENUINE 12552947.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.9L V6 | ACS3098 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Popular Fits: 4.6L V8 | GM281CSF | 🇺🇸 US | Engine VIN Code 6,9,S,YWater pump gaskets Not included | View on Amazon |
| ULTRA-POWER Popular Fits: 3.9L V6 | CS26324 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Oil Pan Gasket(s) Included | View on Amazon |
| APEX Fits: 4.6L V8 | ACS3135 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.9L V6 | C237CSA | 🇺🇸 US | Flex Fuel | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | CS26324 | 🇺🇸 US 🇨🇦 CA | Permadry Rubber Oil Pan Gasket(s) Included | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | CS261504 | 🇺🇸 US 🇨🇦 CA | Permadry Rubber Oil Pan Gasket(s) Included | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | CS54648 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 4.6L V8 | CS261504 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Oil Pan Gasket(s) Included | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 081008501 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.6L V8 | 081004801 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
11 Conversion / Lower Gasket Set parts for the 2009 Buick Lucerne come from 6 brands — APEX, ENGINETECH, ULTRA-POWER and 3 other brands. The "Popular" part is APEX ACS3098.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | BC208J | 🇺🇸 US | Contains Aluminum and TRI-Metal bearingsSet | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | BC414J | 🇺🇸 US | Set | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 89060549 | 🇺🇸 US 🇨🇦 CA | Position # 1 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | MS2275A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Contains Tri-Metal Bearing for Position Number 4 | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS2206P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS2206A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 3.9L V6 | 7242MA | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | 7319MA | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
8 Crankshaft Main Bearing parts are listed for the 2009 Buick Lucerne, from MAHLE / CLEVITE, ENGINETECH, SEALED POWER and 1 other brand.
This group includes ENGINETECH BC208J, ENGINETECH BC414J and GM GENUINE 89060549 and the remaining parts above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 3.9L V6 | 99176 | 🇺🇸 US 🇨🇦 CA | Front0.563 IN Width | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 3.9L V6 | WS99176 | 🇺🇸 US 🇨🇦 CA | Installation Depth: 0.81299999999999994 InShaft Diameter Minimum (In): 1.7609999999999999 In | View on Amazon |
| BCA Fits: 3.9L V6 | NS99298 | 🇺🇸 US 🇨🇦 CA | Rearflex fuel | View on Amazon |
| NATIONAL Fits: 3.9L V6 | 99298 | 🇺🇸 US 🇨🇦 CA | Rear0.563 IN Width | View on Amazon |
| SCHAEFFLER Fits: 3.9L V6 | SR3546 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.9L V6 | WS99298 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
6 Crankshaft Repair Sleeve parts are listed for the 2009 Buick Lucerne, from NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand. NATIONAL 99176 carries the "Popular" badge.
Part numbers include NATIONAL 99176, WJB / INMOTION PARTS WS99176 and BCA NS99298, among others listed above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | BS40670 | 🇺🇸 US 🇨🇦 CA | PTFE RubberIncludes Sleeve | View on Amazon |
| GM GENUINE Popular Fits: 3.9L V6 | 29621 | 🇺🇸 US 🇨🇦 CA | Front61.57/61.37 MM O.D. | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 12568025 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Popular Fits: 3.9L V6 | 9845 | 🇺🇸 US 🇨🇦 CA | Front0.375 IN Width | View on Amazon |
| NATIONAL Popular Fits: 4.6L V8 | 710604 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| TIMKEN Popular Fits: 3.9L V6 | 9845 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 3.9L V6 | WS9845 | 🇺🇸 US 🇨🇦 CA | Housing Bore: 2.4089999999999998 InInside Diameter: 1.7629999999999999 In | View on Amazon |
| APEX Fits: 3.9L V6 | ABS397 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 4.6L V8 | ABS368A | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 4.6L V8 | ATC3691 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| BCA Fits: 3.9L V6 | NS9845 | 🇺🇸 US 🇨🇦 CA | Front0.375 IN Width | View on Amazon |
| BCA Fits: 3.9L V6 | NS4307V | 🇺🇸 US 🇨🇦 CA | Viton | View on Amazon |
| BCA Fits: 3.9L V6 | NS5273 | 🇺🇸 US 🇨🇦 CA | PTFE Rubber | View on Amazon |
| ENGINETECH Fits: 3.9L V6 | S5044 | 🇺🇸 US | Viton1 piece Offset Lip | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | BS40625 | 🇺🇸 US 🇨🇦 CA | PTFE RubberIncludes Sleeve | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | TCS46076 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12592195 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | JV1633 | 🇺🇸 US 🇨🇦 CA | PTFE (Polytetrafluoroethylene) | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | JV1667 | 🇺🇸 US 🇨🇦 CA | Contains 12mm Wide Rear Main SealPTFE (Polytetrafluoroethylene) | View on Amazon |
| NATIONAL Fits: 3.9L V6 | 4307V | 🇺🇸 US 🇨🇦 CA | Viton | View on Amazon |
| NATIONAL Fits: 3.9L V6 | 5273 | 🇺🇸 US 🇨🇦 CA | PTFE Rubber | View on Amazon |
| SCHAEFFLER Fits: 3.9L V6 | SR3932 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SCHAEFFLER Fits: 3.9L V6 | SS3324 | 🇺🇸 US 🇨🇦 CA | Rear3.64" O.D. X 0.35" Width | View on Amazon |
| SKF Fits: 3.9L V6 | 29799 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 4.6L V8 | 37507 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| TIMKEN Fits: 3.9L V6 | 4307V | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 191007101 | 🇺🇸 US 🇨🇦 CA | PTFESet | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 191008401 | 🇺🇸 US 🇨🇦 CA | PTFESet | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 191010501 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.9L V6 | WS4307V | 🇺🇸 US 🇨🇦 CA | RearViton Type | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS710604 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
31 Crankshaft Seal parts are listed for the 2009 Buick Lucerne, from NATIONAL, FEL-PRO, GM GENUINE and 9 other brands. FEL-PRO BS40670 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.
Cylinder Head
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12624612 | 🇺🇸 US 🇨🇦 CA | without Secondary Air InjectionMachined | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 19333093 | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12578243 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the cylinder heads that close the top of the block.
GM GENUINE supplies the 3 Cylinder Head parts for the 2009 Buick Lucerne.
This group includes GM GENUINE 12624612, GM GENUINE 19333093 and GM GENUINE 12578243.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 14024244 | 🇺🇸 US 🇨🇦 CA | SPLIT,15X12.5,CHAM,STL | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 03522352 | 🇺🇸 US 🇨🇦 CA | HOLLOW DOWEL,15.675X28,CHAM BOTH ENDS,SAE 12L14,ZP | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
2 Cylinder Head Alignment Dowel Pin parts for the 2009 Buick Lucerne come from GM GENUINE.
Part numbers include GM GENUINE 14024244 and GM GENUINE 03522352.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | ES72230 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | ES72217 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.9L V6 | GS33615 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| APEX Fits: 3.9L V6 | AHB398 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AHB370 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ENGINETECH Fits: 3.9L V6 | HBK256 | 🇺🇸 US | Set | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | HB279 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | ES722301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 11569648 | 🇺🇸 US 🇨🇦 CA | Single UseM11X1.5X115,62 Thread | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | GS33597 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 141009601 | 🇺🇸 US 🇨🇦 CA | SetImproved Design | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 141012401 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
12 Cylinder Head Bolt parts for the 2009 Buick Lucerne come from 6 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. The "Popular" part is FEL-PRO ES72230.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | 26325PT | 🇺🇸 US 🇨🇦 CA | Permatorquemls Laserweld Technology | View on Amazon |
| FEL-PRO Popular Fits: 3.9L V6 | 26324PT | 🇺🇸 US 🇨🇦 CA | Permatorquemls Laserweld Technology | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | 26151PT | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | 26150PT | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ULTRA-POWER Popular Fits: 3.9L V6 | 26324PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| APEX Fits: 3.9L V6 | AHG398R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| APEX Fits: 3.9L V6 | AHG398L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| APEX Fits: 4.6L V8 | AHG370R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| APEX Fits: 4.6L V8 | AHG370L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ELRING Fits: 3.9L V6 | 835140 | 🇺🇸 US 🇨🇦 CA | RightFlex Fuel | View on Amazon |
| ELRING Fits: 3.9L V6 | 835150 | 🇺🇸 US 🇨🇦 CA | LeftFlex Fuel | View on Amazon |
| ELRING Fits: 4.6L V8 | 835110 | 🇺🇸 US 🇨🇦 CA | RightBody code: HF69 | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12624627 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12624628 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | 54649 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | 54648 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 54356 | 🇺🇸 US 🇨🇦 CA | Graphite | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 54357 | 🇺🇸 US 🇨🇦 CA | Graphite | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 611047800 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 611050500 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 611038400 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 611038300 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
22 Cylinder Head Gasket parts for the 2009 Buick Lucerne come from 7 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO 26325PT.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.9L V6 | C237HSA | 🇺🇸 US | with MLS head gaskets | View on Amazon |
| ENGINETECH Popular Fits: 4.6L V8 | GM281HSE | 🇺🇸 US | Water pump gaskets Not included | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | HS26150PT4 | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| ULTRA-POWER Popular Fits: 3.9L V6 | HS26324PT | 🇺🇸 US 🇨🇦 CA | Head Bolts Not IncludedHead Bolt Replacement Recommended | View on Amazon |
| APEX Fits: 3.9L V6 | AHS3098 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.9L V6 | 753360 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ELRING Fits: 4.6L V8 | 753330 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | GM281HSEWB | 🇺🇸 US | Includes Head BoltsWater pump gaskets Not included | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | HS26324PT | 🇺🇸 US 🇨🇦 CA | Perma Dry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | HS26324PTVK | 🇺🇸 US 🇨🇦 CA | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | HS26150PT4VK | 🇺🇸 US 🇨🇦 CA | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | HS54648 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | HS54356C | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 021049101 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.6L V8 | 021008701 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
15 Cylinder Head Gasket Set parts for the 2009 Buick Lucerne come from 7 brands — FEL-PRO, ENGINETECH, ELRING and 4 other brands. The "Popular" part is ENGINETECH C237HSA.
Cylinder Head Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 11610259 | 🇺🇸 US 🇨🇦 CA | M12X1.5X21.2Hex, Socket | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11562126 | 🇺🇸 US 🇨🇦 CA | Cup, 32.03X7.88X1.27, S30400 Stainless Steel Per SAE J405 | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 01647544 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
GM GENUINE supplies the 3 Cylinder Head Plug parts for the 2009 Buick Lucerne.
Part numbers include GM GENUINE 11610259, GM GENUINE 11562126 and GM GENUINE 01647544.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 3.9L V6 | 2302182 | 🇺🇸 US 🇨🇦 CA | New Height - N/A | View on Amazon |
This table covers the Cylinder Head Spacer shims.
This group shows a single part: SBI 2302182.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12586687 | 🇺🇸 US 🇨🇦 CA | Engine Block Heater (K05) | View on Amazon |
| KAT'S HEATERS Fits: 3.9L V6 | 11484 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
2 Engine Block Heater parts are listed for the 2009 Buick Lucerne, from GM GENUINE and KAT'S HEATERS.
Listed part numbers: GM GENUINE 12586687 and KAT'S HEATERS 11484.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: all 2009 Lucerne engines | GM1228108 | 🇺🇸 US 🇨🇦 CA | LowerAir Deflector Assembly | View on Amazon |
| VARIOUS MFR Fits: all 2009 Lucerne engines | GM1228108 | 🇺🇸 US 🇨🇦 CA | CAPA Certified | View on Amazon |
This table covers the Engine covers.
2 Engine Cover parts for the 2009 Buick Lucerne come from 2 brands — TECHPRO and VARIOUS MFR. Every part fits both the 3.9L V6 and the 4.6L V8.
This group includes TECHPRO GM1228108 and the remaining parts above.
Engine Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12594875 | 🇺🇸 US 🇨🇦 CA | Material: Rubber | View on Amazon |
This table covers the Engine Cover grommets.
One part is listed for the 2009 Buick Lucerne — GM GENUINE 12594875.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.9L V6 | 50552000 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 4.6L V8 | 50551100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.9L V6 | AFS3098 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 4.6L V8 | GM281K5 | 🇺🇸 US | Kit contains (1) head Set, (1) lower Set & (1) water pump Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | 953666 | 🇺🇸 US 🇨🇦 CA | Full Gasket Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Engine Kit Gasket Set parts for the 2009 Buick Lucerne come from 4 brands — AJUSA, APEX, ENGINETECH and 1 other brand.
Part numbers include AJUSA 50552000, AJUSA 50551100 and APEX AFS3098, among others listed above.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | V4429 | 🇺🇸 US | Flex Fuel.3135 stem | View on Amazon |
| MELLING Fits: 3.9L V6 | V3044 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.9L V6 | 1013044 | 🇺🇸 US 🇨🇦 CA | 1.523 Head Diameter. | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 102054 | 🇺🇸 US 🇨🇦 CA | 1.103 Head Diameter. | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 1013243 | 🇺🇸 US 🇨🇦 CA | 1.142 Head Diameter. | View on Amazon |
| SBI Fits: 3.9L V6 | 13044 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 4.6L V8 | 13243 | 🇺🇸 US 🇨🇦 CA | Superalloy | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
7 Exhaust Valve parts are listed for the 2009 Buick Lucerne, from QUALCAST, SBI, ENGINETECH and 1 other brand.
Part numbers include ENGINETECH V4429, MELLING V3044 and QUALCAST 1013044, among others listed above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.9L V6 | 12621646 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ATP Fits: 3.9L V6 | 102207 | 🇺🇸 US 🇨🇦 CA | Serpentine | View on Amazon |
| ATP Fits: 4.6L V8 | 102382 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 3.9L V6 | PB1544N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
| DAYCO Fits: 4.6L V8 | PB1688N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
| DORMAN Fits: 3.9L V6 | 594266 | 🇺🇸 US 🇨🇦 CA | SerpentineDiameter | View on Amazon |
| PIONEER Fits: 3.9L V6 | DA207 | 🇺🇸 US 🇨🇦 CA | Groove Quantity 6Serpentine | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
7 Harmonic Balancer parts for the 2009 Buick Lucerne come from 5 brands — ATP, DAYCO, GM GENUINE and 2 other brands. The "Popular" part is GM GENUINE 12621646.
Part numbers include GM GENUINE 12621646, ATP 102207 and ATP 102382, among others listed above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 595005 | 🇺🇸 US 🇨🇦 CA | M14 X 1.50 X 48.4 mm | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11549124 | 🇺🇸 US 🇨🇦 CA | M14X1.5X48.4 | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts are listed for the 2009 Buick Lucerne, from DORMAN and GM GENUINE.
Part numbers include DORMAN 595005 and GM GENUINE 11549124.
Harmonic Balancer Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 3.9L V6 | 88176 | 🇺🇸 US 🇨🇦 CA | Except flange tear line | View on Amazon |
| NATIONAL Fits: 3.9L V6 | 5000 | 🇺🇸 US 🇨🇦 CA | KitNitrile | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.9L V6 | WS88176 | 🇺🇸 US 🇨🇦 CA | Material: Nickel Plated Formed Steel | View on Amazon |
This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.
3 Harmonic Balancer Repair Sleeve parts are listed for the 2009 Buick Lucerne, from NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL 88176, NATIONAL 5000 and WJB / INMOTION PARTS WS88176.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12611485 | 🇺🇸 US 🇨🇦 CA | UpperWATER PUMP | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 19330172 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
GM GENUINE supplies both parts for the 2009 Buick Lucerne.
Listed part numbers: GM GENUINE 12611485 and GM GENUINE 19330172.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | ES72226 | 🇺🇸 US 🇨🇦 CA | LowerAftermarket Design | View on Amazon |
| APEX Fits: 3.9L V6 | AES311 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 3.9L V6 | 03426 | 🇺🇸 US 🇨🇦 CA | Use RTV Sealant On Threads As These Bolts Pass Into A Coolant Passage | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11588352 | 🇺🇸 US 🇨🇦 CA | M6X1X48 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | GS33420 | 🇺🇸 US 🇨🇦 CA | Includes WashersSteel | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 161000001 | 🇺🇸 US 🇨🇦 CA | Lowerwith 10mm Bolts | View on Amazon |
This table covers the Intake Manifold bolts.
6 Intake Manifold Bolt parts for the 2009 Buick Lucerne come from 6 brands — FEL-PRO, APEX, DORMAN and 3 other brands. The "Popular" part is FEL-PRO ES72226.
Listed part numbers: FEL-PRO ES72226, APEX AES311 and DORMAN 03426, plus the other parts above.
Intake Manifold Gasket
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | MS98015T | 🇺🇸 US 🇨🇦 CA | SetIncludes Perma DryPlus Intake Manifold Gaskets | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.9L V6 | 19179756 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.9L V6 | AMS3981P | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | MIK98015T | 🇺🇸 US 🇨🇦 CA | Complete Installation SetWith Perma DryPlus Intake Manifold Gaskets | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | MS19510 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | MIS19510 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Master Includes Intake and Valve Cover Gaskets Plus All Miscellaneous Gaskets And Seals | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 111057401 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | MS96716 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AMS3692 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12588809 | 🇺🇸 US 🇨🇦 CA | Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS19706 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 111034001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
12 Intake Manifold Gasket parts for the 2009 Buick Lucerne come from 5 brands — FEL-PRO, MAHLE / CLEVITE, GM GENUINE and 2 other brands. The "Popular" part is FEL-PRO MS98015T.
In the Premium grade, FEL-PRO supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is FEL-PRO MS98015T.
In the Standard Replacement grade, MAHLE / CLEVITE, GM GENUINE, APEX and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is GM GENUINE 19179756.
5 further parts sit outside the graded sections, with the same engine-level match.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | MS96824 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| APEX Fits: 3.9L V6 | AMS3980 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 89017867 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | MS19547 | 🇺🇸 US 🇨🇦 CA | Plenum Gasket SetFuel Injection | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 151030701 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Plenum Gasket parts are listed for the 2009 Buick Lucerne, from FEL-PRO, APEX, GM GENUINE and 2 other brands. FEL-PRO MS96824 carries the "Popular" badge.
This group includes FEL-PRO MS96824, APEX AMS3980 and GM GENUINE 89017867 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.9L V6 | V3043 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.9L V6 | V4430 | 🇺🇸 US | Flex Fuel.3136 stem | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | V4362 | 🇺🇸 US | .2335 stem1.426 Head | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12577696 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.9L V6 | 1013043 | 🇺🇸 US 🇨🇦 CA | 1.870 Head Diameter. | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 102053 | 🇺🇸 US 🇨🇦 CA | 1.426 Head Diameter. | View on Amazon |
| SBI Fits: 3.9L V6 | 13043 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 4.6L V8 | 02053 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 4.6L V8 | V4643 | 🇺🇸 US 🇨🇦 CA | Chrome Plated StemSize | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
9 Intake Valve parts are listed for the 2009 Buick Lucerne, from ENGINETECH, QUALCAST, SBI and 3 other brands. MELLING V3043 carries the "Popular" badge.
Listed part numbers: MELLING V3043, ENGINETECH V4430 and ENGINETECH V4362, plus the other parts above.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 3.9L V6 | SKM3149 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 3.9L V6 | 3149 | 🇺🇸 US 🇨🇦 CA | RearReuse OE Heat Shield | View on Amazon |
| ANCHOR Popular Fits: 3.9L V6 | 3158 | 🇺🇸 US 🇨🇦 CA | FrontHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.9L V6 | A5892 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.9L V6 | A5492HY | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| PIONEER Fits: 3.9L V6 | 605437 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| PIONEER Fits: 3.9L V6 | 603158 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WESTAR Fits: 3.9L V6 | EM3149 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WESTAR Fits: 3.9L V6 | EM3158 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 4.6L V8 | 3166 | 🇺🇸 US 🇨🇦 CA | FrontHydraulic | View on Amazon |
| WESTAR Popular Fits: 4.6L V8 | EM3166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ANCHOR Fits: 4.6L V8 | 3320 | 🇺🇸 US 🇨🇦 CA | RearHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5491HY | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5706 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| PIONEER Fits: 4.6L V8 | 613166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| PIONEER Fits: 4.6L V8 | 615706 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WESTAR Fits: 4.6L V8 | EM4212 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
17 Motor Mount parts are listed for the 2009 Buick Lucerne, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. ANCHOR 3149 carries the "Popular" badge.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM3149.
The Standard Replacement section: 8 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 3149 is listed in this group.
8 ungrouped parts are not assigned to a grade, with the same engine-level match.
Motor Mount Bracket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2009 Lucerne engines | 11569601 | 🇺🇸 US 🇨🇦 CA | M12X1.75X108.4 | View on Amazon |
This table covers the Motor Mount Bracket bolts.
This group shows a single part: GM GENUINE 11569601.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.9L V6 | 300806 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ANCHOR Fits: 4.6L V8 | 300607 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WESTAR Fits: 4.6L V8 | ETK074 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Motor Mount kits.
3 Motor Mount Kit parts are listed for the 2009 Buick Lucerne, from ANCHOR and WESTAR.
Listed part numbers: ANCHOR 300806, ANCHOR 300607 and WESTAR ETK074.
Oil
Summary: Notes list SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Both engines share the same viscosities. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: all 2009 Lucerne engines | 20228 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: all 2009 Lucerne engines | 125195 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: all 2009 Lucerne engines | 124315 | 🇺🇸 US 🇨🇦 CA | 5W-30Mobil 1 Advanced | View on Amazon |
| IDEMITSU Fits: all 2009 Lucerne engines | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: all 2009 Lucerne engines | 30013015750 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP1 Quart | View on Amazon |
| IDEMITSU Fits: all 2009 Lucerne engines | 30013015953 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP5 Quart | View on Amazon |
| LIQUI MOLY Fits: all 2009 Lucerne engines | 20136 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2009 Lucerne engines | 20226 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: all 2009 Lucerne engines | 20138 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-305 Liter | View on Amazon |
| LUCAS OIL Fits: all 2009 Lucerne engines | 10049 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: all 2009 Lucerne engines | 18005 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| LUCAS OIL Fits: all 2009 Lucerne engines | 18008 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 0W-306 Gallon | View on Amazon |
| MOBIL Fits: all 2009 Lucerne engines | 112627 | 🇺🇸 US 🇨🇦 CA | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| PENTOSIN Fits: all 2009 Lucerne engines | 8044214 | 🇺🇸 US 🇨🇦 CA | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: all 2009 Lucerne engines | 8044216 | 🇺🇸 US 🇨🇦 CA | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | VV955 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 891678 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 904564 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 891670 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 904566 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 881164 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: all 2009 Lucerne engines | VV1556 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: all 2009 Lucerne engines | 123842 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| MOBIL Fits: all 2009 Lucerne engines | 103767 | 🇺🇸 US 🇨🇦 CA | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | VV179 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 881163 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 881169 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2009 Lucerne engines | 109290 | 🇺🇸 US | Synthetic BlendAPI SP Specifications | View on Amazon |
| MOBIL Popular Fits: all 2009 Lucerne engines | 124407 | 🇺🇸 US 🇨🇦 CA | Super 5W-30Mobil Super | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 797975 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: all 2009 Lucerne engines | 881159 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
31 Oil parts are listed for the 2009 Buick Lucerne, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 21 parts.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.6L V8 | ES73360 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: FEL-PRO ES73360.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: all 2009 Lucerne engines | 238 | 🇺🇸 US 🇨🇦 CA | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: all 2009 Lucerne engines | 153 | 🇺🇸 US 🇨🇦 CA | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
2 Oil Cooler Mounting Kit parts for the 2009 Buick Lucerne come from HAYDEN. Every part fits both the 3.9L V6 and the 4.6L V8.
Part numbers include HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.9L V6 | 917430 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
| SKP Fits: 3.9L V6 | SK917431 | 🇺🇸 US 🇨🇦 CA | Tube Only | View on Amazon |
This table covers the Oil Dipstick tubes.
2 Oil Dipstick / Tube parts are listed for the 2009 Buick Lucerne, from DORMAN and SKP.
Listed part numbers: DORMAN 917430 and SKP SK917431.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: all 2009 Lucerne engines | 584210 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 6,07 | View on Amazon |
| FEL-PRO Fits: all 2009 Lucerne engines | 73889 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: all 2009 Lucerne engines | 24504031 | 🇺🇸 US 🇨🇦 CA | Fits Flex Fuel6.07 ID | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Oil Dipstick / Tube Seal parts for the 2009 Buick Lucerne come from 3 brands — ELRING, FEL-PRO and GM GENUINE. Every part fits both the 3.9L V6 and the 4.6L V8.
Part numbers include ELRING 584210, FEL-PRO 73889 and GM GENUINE 24504031.
Oil Drain Plug
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2009 Lucerne engines | 090175 | 🇺🇸 US 🇨🇦 CA | Integrated GasketM12 x 1.75 Thread | View on Amazon |
Twist Drain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2009 Lucerne engines | 092018 | 🇺🇸 US 🇨🇦 CA | Thread Size: M12-1.75Twist Style | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2009 Lucerne engines | 090034 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 Thread | View on Amazon |
| ELRING Fits: all 2009 Lucerne engines | 823400 | 🇺🇸 US 🇨🇦 CA | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| GM GENUINE Fits: all 2009 Lucerne engines | 11562588 | 🇺🇸 US 🇨🇦 CA | with SealExc. Magnet | View on Amazon |
| VAICO Fits: all 2009 Lucerne engines | V400755 | 🇺🇸 US 🇨🇦 CA | Thread Size: M 12 X 1,75Includes Gasket | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts are listed for the 2009 Buick Lucerne, from DORMAN, ELRING, GM GENUINE and 1 other brand. DORMAN 090175 carries the "Popular" badge. All of them fit every engine offered in the 2009 Lucerne.
Economy: 1 part, from DORMAN. A representative part number is DORMAN 090175.
The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092018 is listed in this group.
4 ungrouped parts are not assigned to a grade, with the same engine-level match.
Part numbers include DORMAN 090175, DORMAN 092018 and DORMAN 090034, among others listed above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: all 2009 Lucerne engines | 70820 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| GM GENUINE Popular Fits: all 2009 Lucerne engines | 12616850 | 🇺🇸 US 🇨🇦 CA | Diameter 19.39 | View on Amazon |
| AJUSA Fits: all 2009 Lucerne engines | 01288800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: all 2009 Lucerne engines | 97119 | 🇺🇸 US 🇨🇦 CA | Rubber GasketRubber | View on Amazon |
| ELRING Fits: all 2009 Lucerne engines | 056130 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | 71244 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| ULTRA-POWER Fits: all 2009 Lucerne engines | 097119 | 🇺🇸 US 🇨🇦 CA | ID: 0.448"RUBBER GASKET | View on Amazon |
| VAICO Fits: all 2009 Lucerne engines | V401110 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.9L V6 | 711351300 | 🇺🇸 US 🇨🇦 CA | 0.4150 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Oil Drain Plug Gasket parts for the 2009 Buick Lucerne come from 8 brands — FEL-PRO, GM GENUINE, AJUSA and 5 other brands. The "Popular" part is FEL-PRO 70820. 7 parts fit every engine; the other 2 are engine-specific.
This group includes FEL-PRO 70820, GM GENUINE 12616850 and AJUSA 01288800 and the remaining parts above.
Oil Drain Plug Insert
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 11503302 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Drain Plug inserts.
This group shows a single part: GM GENUINE 11503302.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.9L V6 | FC219 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| ACDELCO Popular Fits: 4.6L V8 | FC208 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| MOTORAD Popular Fits: all 2009 Lucerne engines | MO99 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CALORSTAT Fits: all 2009 Lucerne engines | OC2314 | 🇺🇸 US 🇨🇦 CA | PlasticTwist-On | View on Amazon |
| DORMAN Fits: 3.9L V6 | 80987 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 4.6L V8 | 42315 | 🇺🇸 US 🇨🇦 CA | with SAE 5W30 On Cap | View on Amazon |
| GATES Fits: all 2009 Lucerne engines | 31103 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: all 2009 Lucerne engines | SKMO99 | 🇺🇸 US 🇨🇦 CA | with Plastic cap | View on Amazon |
This table covers the caps on the oil filler neck.
8 Oil Filler Cap parts are listed for the 2009 Buick Lucerne, from ACDELCO, DORMAN, MOTORAD and 3 other brands. ACDELCO FC219 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.
Part numbers include ACDELCO FC219, ACDELCO FC208 and MOTORAD MO99, among others listed above.
Oil Filler Cap Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.9L V6 | 592250 | 🇺🇸 US 🇨🇦 CA | SealMaterial: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| ELRING Fits: 3.9L V6 | 823620 | 🇺🇸 US 🇨🇦 CA | SealMaterial: HNBR (hydrogenated nitrile butadiene rubber) | View on Amazon |
| FEL-PRO Fits: all 2009 Lucerne engines | 73193 | 🇺🇸 US 🇨🇦 CA | Services OEM bonded Cap sealAftermarket Design | View on Amazon |
| GM GENUINE Fits: all 2009 Lucerne engines | 24100002 | 🇺🇸 US 🇨🇦 CA | Size # 32027.94MM Inner Diameter | View on Amazon |
This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Filler Cap Gasket parts for the 2009 Buick Lucerne come from 3 brands — ELRING, FEL-PRO and GM GENUINE. 2 parts fit every engine; the other 2 are engine-specific.
This group includes ELRING 592250, ELRING 823620 and FEL-PRO 73193 and the remaining parts above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Popular Fits: all 2009 Lucerne engines | PH59 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: YESSpin-On Filter. | View on Amazon |
| FRAM Fits: all 2009 Lucerne engines | FE9837 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: all 2009 Lucerne engines | R1522 | 🇺🇸 US 🇨🇦 CA | Flex FuelOriginal Equipment (OE) Part Number 25014377 | View on Amazon |
| K&N Fits: all 2009 Lucerne engines | PS2006 | 🇺🇸 US 🇨🇦 CA | Pro-Series without Wrench Off Nut | View on Amazon |
| PRO-TEC Fits: all 2009 Lucerne engines | PXL51522 | 🇺🇸 US 🇨🇦 CA | Flex Fuel | View on Amazon |
| PUROLATOR Fits: all 2009 Lucerne engines | TL25288 | 🇺🇸 US 🇨🇦 CA | Class: BMedia Material: Cellulose | View on Amazon |
| VARIOUS MFR Fits: all 2009 Lucerne engines | PG5288 | 🇺🇸 US 🇨🇦 CA | 2.75" Diameter | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 2009 Lucerne engines | UPF61R | 🇺🇸 US 🇨🇦 CA | Gold / Professional SpecialtyULTRAGUARD | View on Amazon |
| FRAM Fits: all 2009 Lucerne engines | XG9837 | 🇺🇸 US 🇨🇦 CA | Ultra SyntheticSpin-On | View on Amazon |
| FRAM Fits: all 2009 Lucerne engines | TG9837 | 🇺🇸 US 🇨🇦 CA | Tough GuardSpin-On | View on Amazon |
| MOBIL Fits: all 2009 Lucerne engines | M1206A | 🇺🇸 US 🇨🇦 CA | Extended PerformanceOutside Diameter: 2.97 (75mm) | View on Amazon |
| WIX Fits: all 2009 Lucerne engines | 51522XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2009 Lucerne engines | PF61E | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| BOSCH Popular Fits: all 2009 Lucerne engines | 3423 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: all 2009 Lucerne engines | 51522 | 🇺🇸 US 🇨🇦 CA | Media Material: Enhanced Cellulose | View on Amazon |
| DENSO Fits: all 2009 Lucerne engines | 1502008 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| FRAM Fits: all 2009 Lucerne engines | PH9837 | 🇺🇸 US 🇨🇦 CA | Extra GuardSpin-On | View on Amazon |
| HASTINGS / BALDWIN Fits: all 2009 Lucerne engines | LF487 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: all 2009 Lucerne engines | OC1048 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| VARIOUS MFR Fits: all 2009 Lucerne engines | PG5288EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
20 Oil Filter parts are listed for the 2009 Buick Lucerne, from FRAM, VARIOUS MFR, ACDELCO and 11 other brands. CHAMP / LUBER-FINER PH59 carries the "Popular" badge. All of them fit every engine offered in the 2009 Lucerne.
Economy: 7 parts, from CHAMP / LUBER-FINER, FRAM, FVP and 4 other brands. A representative part number is CHAMP / LUBER-FINER PH59.
In the High Performance / Heavy Duty grade, FRAM, ACDELCO, MOBIL and 1 other brand supply 5 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO UPF61R.
The Standard Replacement section: 8 options from ACDELCO, BOSCH, WIX and 5 other brands. ACDELCO PF61E is listed in this group.
Oil Filter Adapter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 24575062 | 🇺🇸 US 🇨🇦 CA | End 1 Outside Diameter (In): 0.73 InMaterial: Steel | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 19418234 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter adapters.
2 Oil Filter Adapter parts for the 2009 Buick Lucerne come from GM GENUINE.
Part numbers include GM GENUINE 24575062 and GM GENUINE 19418234.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | 72423 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Popular Fits: 3.9L V6 | B32184 | 🇺🇸 US 🇨🇦 CA | Polyacrylic | View on Amazon |
| APEX Fits: 3.9L V6 | AOM6024 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 3.9L V6 | 917014 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 4.6L V8 | 926494 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.9L V6 | 12607947 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12573044 | 🇺🇸 US 🇨🇦 CA | Material: Rubber / Aluminum | View on Amazon |
| SKP Fits: 3.9L V6 | SK12607947 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.9L V6 | 711359500 | 🇺🇸 US 🇨🇦 CA | Outside Diameter: 4.1880 In | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 711351100 | 🇺🇸 US 🇨🇦 CA | Improved DesignOutside Diameter: 3.8050 In | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
10 Oil Filter Adapter Gasket / O-Ring parts for the 2009 Buick Lucerne come from 7 brands — DORMAN, GM GENUINE, VICTOR REINZ and 4 other brands. The "Popular" part is FEL-PRO 72423.
Oil Filter Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2009 Lucerne engines | 25014612 | 🇺🇸 US 🇨🇦 CA | without VAPOR SEPARATOROPENING PRESSURE 21 PSI NOMINAL | View on Amazon |
This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 2009 Buick Lucerne — GM GENUINE 25014612.
Oil Level Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12603782 | 🇺🇸 US 🇨🇦 CA | Straight Electrical ConnectorMating Connector with Leads Use 12102747 | View on Amazon |
| WELLS Fits: 4.6L V8 | 5S3003 | 🇺🇸 US 🇨🇦 CA | Connector Gender: Female | View on Amazon |
This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Oil Level Sensor parts are listed for the 2009 Buick Lucerne, from GM GENUINE and WELLS.
Part numbers include GM GENUINE 12603782 and WELLS 5S3003.
Oil Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 4.6L V8 | GS33431 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
This table covers the gaskets that seal the Oil Manifold. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE GS33431.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.9L V6 | 264330 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Popular Fits: 4.6L V8 | SK264127 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Popular Fits: 3.9L V6 | GMP66B | 🇺🇸 US 🇨🇦 CA | GASKET AND/OR SEALANT NOT INCLUDED | View on Amazon |
| DORMAN Fits: 4.6L V8 | 264127 | 🇺🇸 US 🇨🇦 CA | with Hole for Sensor | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12604911 | 🇺🇸 US 🇨🇦 CA | Includes Gasket, Bolts | View on Amazon |
| LILAND GLOBAL Fits: 3.9L V6 | IGMP66B | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.9L V6 | SK264330 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Fits: 4.6L V8 | GMP71A | 🇺🇸 US 🇨🇦 CA | Gasket and/or Sealant Not Includedwithout Sensor Hole | View on Amazon |
| SPECTRA PREMIUM Fits: 4.6L V8 | GMP101A | 🇺🇸 US 🇨🇦 CA | Gasket and/or Sealant Not Includedwith Sensor Hole | View on Amazon |
| ULTRA-POWER Fits: 3.9L V6 | 3310228 | 🇺🇸 US 🇨🇦 CA | Oil Pan (Engine)Gasket and/or Sealant Not Included | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 264127 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VAICO Fits: 4.6L V8 | V510112 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
12 Oil Pan parts for the 2009 Buick Lucerne come from 7 brands — SPECTRA PREMIUM, DORMAN, SKP and 4 other brands. The "Popular" part is DORMAN 264330.
Oil Pan Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 11589399 | 🇺🇸 US 🇨🇦 CA | without SEALINCLUDES SEALANT ON BOTTOM OF BOLT HEAD | View on Amazon |
This table covers the Oil Pan bolts.
One part is listed for the 2009 Buick Lucerne — GM GENUINE 11589399.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | OS30776R | 🇺🇸 US 🇨🇦 CA | Permadry | View on Amazon |
| VICTOR REINZ Popular Fits: 4.6L V8 | 703141410 | 🇺🇸 US 🇨🇦 CA | RTV Silicone | View on Amazon |
| APEX Fits: 3.9L V6 | AOP398 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 4.6L V8 | AOP368 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 4.6L V8 | OS30704R | 🇺🇸 US 🇨🇦 CA | Permadry | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12602848 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.9L V6 | OS32320 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | OS32243 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 101024201 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.6L V8 | 101022401 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
10 Oil Pan Gasket parts are listed for the 2009 Buick Lucerne, from VICTOR REINZ, FEL-PRO, APEX and 2 other brands. FEL-PRO OS30776R carries the "Popular" badge.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | EPK116 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | EP188 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 4.6L V8 | M188 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | EP354367S | 🇺🇸 US | Includes Screen | View on Amazon |
| MELLING Fits: 3.9L V6 | M354367S | 🇺🇸 US 🇨🇦 CA | Includes Oil Pickup Tube Assembly | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
5 Oil Pump parts are listed for the 2009 Buick Lucerne, from ENGINETECH and MELLING.
Economy: 1 part, from ENGINETECH. A representative part number is ENGINETECH EPK116.
The Standard Replacement section: 2 options from ENGINETECH and MELLING. ENGINETECH EP188 is listed in this group.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
This group includes ENGINETECH EPK116, ENGINETECH EP188 and MELLING M188 and the remaining parts above.
Oil Pump Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 11588749 | 🇺🇸 US 🇨🇦 CA | M10X1.5X85 | View on Amazon |
This table covers the Oil Pump bolts.
This group shows a single part: GM GENUINE 11588749.
Oil Pump Repair Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 4.6L V8 | K188 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 4.6L V8 | 22453585 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump repair kits.
2 Oil Pump Repair Kit parts for the 2009 Buick Lucerne come from 2 brands — MELLING and SEALED POWER.
Part numbers include MELLING K188 and SEALED POWER 22453585.
Oil Pump Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.9L V6 | IS354 | 🇺🇸 US 🇨🇦 CA | Includes Installed Nylon Shaft Guide | View on Amazon |
This table covers the Oil Pump shafts.
One part is listed for the 2009 Buick Lucerne — MELLING IS354.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Fits: 4.6L V8 | H1111CP | 🇺🇸 US 🇨🇦 CA | HypereutecticAlloy | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | H1111NCP | 🇺🇸 US 🇨🇦 CA | Hypereutecticwith 0.100In Dome Height | View on Amazon |
| SILV-O-LITE Fits: 4.6L V8 | 3497HC | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedFloating Pin Type | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | P5078 | 🇺🇸 US | Dome Top | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.9L V6 | P5071 | 🇺🇸 US | Coated SkirtRecessed Head 0.154" deep Hypereutectic | View on Amazon |
| ENGINETECH Fits: 3.9L V6 | K50716P | 🇺🇸 US | Coated SkirtRecessed Head 0.154" deep Hypereutectic | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | 2243671 | 🇺🇸 US 🇨🇦 CA | Skirt Coated | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | 2243671WR | 🇺🇸 US 🇨🇦 CA | with RingsSkirt Coated | View on Amazon |
| SILV-O-LITE Fits: 3.9L V6 | 3525HC | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedFloating Pin Type | View on Amazon |
| SILV-O-LITE Fits: 4.6L V8 | 3497HCK1 | 🇺🇸 US 🇨🇦 CA | Includes Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
10 Piston parts for the 2009 Buick Lucerne come from 4 brands — SILV-O-LITE, ENGINETECH, SEALED POWER and 1 other brand. The "Popular" part is ENGINETECH P5078.
Premium: 3 parts, from SEALED POWER and SILV-O-LITE. A representative part number is SEALED POWER H1111CP.
Standard Replacement: 1 part, from ENGINETECH. A representative part number is ENGINETECH P5078.
6 further parts sit outside the graded sections, with the same engine-level match.
Piston Pin Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12569638 | 🇺🇸 US 🇨🇦 CA | Used with Federal Mogul Pistons | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12566186 | 🇺🇸 US 🇨🇦 CA | Exc. Brazil (CV2) | View on Amazon |
This table covers the Piston Pin retainers.
GM GENUINE supplies both parts for the 2009 Buick Lucerne.
This group includes GM GENUINE 12569638 and GM GENUINE 12566186.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | S94216 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | S93158 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | 42120CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 41930CP | 🇺🇸 US 🇨🇦 CA | Material Carbon Steel / Cast Iron / Stainless SteelPremium | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 3.9L V6 | 2C5270S | 🇺🇸 US | 1 Cylinder SetChrome Top Ring | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.9L V6 | 2C5270 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
| HASTINGS MANUFACTURING Fits: 4.6L V8 | 2C5024 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
7 Piston Ring parts for the 2009 Buick Lucerne come from 3 brands — HASTINGS MANUFACTURING, ENGINETECH and MAHLE / CLEVITE.
Premium: 4 parts, from ENGINETECH and MAHLE / CLEVITE. A representative part number is ENGINETECH S94216.
Standard Replacement: 3 parts, from HASTINGS MANUFACTURING. A representative part number is HASTINGS MANUFACTURING 2C5270S.
Part numbers include ENGINETECH S94216, ENGINETECH S93158 and MAHLE / CLEVITE 42120CP, among others listed above.
Push Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.9L V6 | EPR670 | 🇺🇸 US | ExhaustFLEX Fuel | View on Amazon |
| GM GENUINE Popular Fits: 3.9L V6 | 12577692 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ENGINETECH Fits: 3.9L V6 | EPR669 | 🇺🇸 US | IntakeFLEX Fuel | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12577693 | 🇺🇸 US 🇨🇦 CA | EXH | View on Amazon |
| MELLING Fits: 3.9L V6 | MPR546 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| MELLING Fits: 3.9L V6 | MPR547 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| SBI Fits: 3.9L V6 | 1901547 | 🇺🇸 US 🇨🇦 CA | Exhaust6.168 Length | View on Amazon |
This table covers the pushrods that transfer lifter motion to the rocker arms.
7 Push Rod parts for the 2009 Buick Lucerne come from 4 brands — ENGINETECH, GM GENUINE, MELLING and 1 other brand. The "Popular" part is ENGINETECH EPR670.
Part numbers include ENGINETECH EPR670, GM GENUINE 12577692 and ENGINETECH EPR669, among others listed above.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.9L V6 | MR1331 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.9L V6 | ER9126 | 🇺🇸 US | Roller Rocker Assemblywith 8mm Bolt | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12577695 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12693909 | 🇺🇸 US 🇨🇦 CA | Optional with 24100294 | View on Amazon |
| MELLING Fits: 4.6L V8 | MR1340 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.9L V6 | 402901 | 🇺🇸 US 🇨🇦 CA | Rocker Arm with Pivot, 8mm Bolt | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 402917 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 3.9L V6 | 1801331 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustRoller Pivot Assy. | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
8 Rocker Arm parts are listed for the 2009 Buick Lucerne, from MELLING, GM GENUINE, QUALCAST and 2 other brands. MELLING MR1331 carries the "Popular" badge.
Listed part numbers: MELLING MR1331, ENGINETECH ER9126 and GM GENUINE 12577695, plus the other parts above.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 3.9L V6 | ZSS1222 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.9L V6 | S1222 | 🇺🇸 US 🇨🇦 CA | with Actuator | View on Amazon |
| ULTRA-POWER Fits: 3.9L V6 | 918190 | 🇺🇸 US 🇨🇦 CA | Cam Gear | View on Amazon |
This table covers the Timing Cam sprockets.
3 Timing Cam Sprocket parts are listed for the 2009 Buick Lucerne, from INA, S.A. GEAR and ULTRA-POWER.
Listed part numbers: INA ZSS1222, S.A. GEAR S1222 and ULTRA-POWER 918190.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.9L V6 | 700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 4.6L V8 | 8MMSRH62 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | 8MMSRH126 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Popular Fits: 3.9L V6 | C700 | 🇺🇸 US 🇨🇦 CA | Chain | View on Amazon |
| CLOYES Fits: 3.9L V6 | C700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 4.6L V8 | 94187 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| CLOYES Fits: 4.6L V8 | 94186 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| ENGINETECH Fits: 3.9L V6 | TS700B | 🇺🇸 US | Contains chain and tensioner/guide assembly | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 24506090 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.9L V6 | ZCC700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 4.6L V8 | ZC94186 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZC94187 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.9L V6 | C700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | C1562 | 🇺🇸 US 🇨🇦 CA | LowerPrimary Timing Chain | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | C15126 | 🇺🇸 US 🇨🇦 CA | UpperSecondary Timing Chain | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | RC1019 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | RC1020 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
17 Timing Chain parts for the 2009 Buick Lucerne come from 7 brands — MELLING, S.A. GEAR, CLOYES and 4 other brands. The "Popular" part is MELLING 700.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 3.9L V6 | TS22700 | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.9L V6 | TS12699 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | TS21562 | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| S.A. GEAR Fits: 3.9L V6 | 76160S | 🇺🇸 US 🇨🇦 CA | Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner | View on Amazon |
| S.A. GEAR Fits: 3.9L V6 | 76160 | 🇺🇸 US 🇨🇦 CA | Includes Cam Sprocket, Chain, Crank Sprocket, Tensioner | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 76108S | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 3 Chains, 2 Dampers, 3 Guides, 3 Tensioners | View on Amazon |
| SKP Fits: 4.6L V8 | SK94186S | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| ULTRA-POWER Fits: 3.9L V6 | 90700SB | 🇺🇸 US 🇨🇦 CA | without VARIABLE VALVE TIMING (VVT) SPROCKET | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.9L V6 | 90700SB | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket | View on Amazon |
| CLOYES Popular Fits: 4.6L V8 | 94186SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (3), Timing Chain Tensioner Guide (2) | View on Amazon |
| MELLING Popular Fits: 3.9L V6 | 3700SE | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 4.6L V8 | 38MMSRH62S | 🇺🇸 US 🇨🇦 CA | Does Not Include Sprockets | View on Amazon |
| INA Fits: 3.9L V6 | ZC90700SB | 🇺🇸 US 🇨🇦 CA | Includes 1 Chain, 1 Crank Sprocket, 1 TensionerDoes Not Include Cam Sprocket | View on Amazon |
| INA Fits: 3.9L V6 | ZC76160 | 🇺🇸 US 🇨🇦 CA | Includes 1 Cam Sprocket, 1 Chain, 1 Crank Sprocket, 1 Tensioner | View on Amazon |
| INA Fits: 4.6L V8 | ZC94186SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 3 Chains, 3 Guides, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
15 Timing Chain & Component Kit parts are listed for the 2009 Buick Lucerne, from PREFERRED COMPONENTS INC, S.A. GEAR, INA and 4 other brands. CLOYES 90700SB carries the "Popular" badge.
Economy: 8 parts, from PREFERRED COMPONENTS INC, S.A. GEAR, SKP and 1 other brand. A representative part number is PREFERRED COMPONENTS INC TS22700.
The Standard Replacement section: 7 options from INA, CLOYES and MELLING. CLOYES 90700SB is listed in this group.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.6L V8 | BG310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BG309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BD312 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BD311 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95309 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95310 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95311 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95312 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| INA Fits: 4.6L V8 | ZG95309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| INA Fits: 4.6L V8 | ZG95310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZG95312 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75311 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75312A | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7311 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7312 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
19 Timing Chain Guide / Damper parts for the 2009 Buick Lucerne come from 5 brands — MELLING, CLOYES, PREFERRED COMPONENTS INC and 2 other brands. The "Popular" part is MELLING BG310.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 4.6L V8 | 12581223 | 🇺🇸 US 🇨🇦 CA | CenterPrimary | View on Amazon |
| MELLING Popular Fits: 3.9L V6 | BT5617 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 4.6L V8 | BT314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BT313 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Popular Fits: 3.9L V6 | 91013 | 🇺🇸 US 🇨🇦 CA | Tensioner | View on Amazon |
| CLOYES Fits: 3.9L V6 | 95617 | 🇺🇸 US 🇨🇦 CA | Center | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95313 | 🇺🇸 US 🇨🇦 CA | Left Upper | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12600695 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.9L V6 | ZT95617 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 4.6L V8 | ZT95313 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZT95314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.9L V6 | T68695 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65314 | 🇺🇸 US 🇨🇦 CA | LowerPrimary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65313 | 🇺🇸 US 🇨🇦 CA | Left UpperSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65313A | 🇺🇸 US 🇨🇦 CA | Right UpperSecondary | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 9313 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 9314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
18 Timing Chain Tensioner parts are listed for the 2009 Buick Lucerne, from PREFERRED COMPONENTS INC, MELLING, S.A. GEAR and 3 other brands. GM GENUINE 12581223 carries the "Popular" badge.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V6 | 72966 | 🇺🇸 US 🇨🇦 CA | Configuration: ONE Piece | View on Amazon |
| FEL-PRO Popular Fits: 3.9L V6 | TCS46089 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Popular Fits: 4.6L V8 | 72673 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Popular Fits: 4.6L V8 | JV5065 | 🇺🇸 US 🇨🇦 CA | Contains Timing Cover Seal & Front Cover Gasket OnlySet | View on Amazon |
| APEX Fits: 3.9L V6 | ATC3980 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12554519 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.9L V6 | T32183 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | JV5168 | 🇺🇸 US 🇨🇦 CA | Contains Water Pump Gaskets, Timing Cover Gasket and SealSet | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | T32453 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 72673 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.9L V6 | 711460800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.9L V6 | 151024301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 711407300 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
13 Timing Cover Gasket parts are listed for the 2009 Buick Lucerne, from MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 3 other brands. FEL-PRO 72966 carries the "Popular" badge.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 3.9L V6 | 17765A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKF Fits: 4.6L V8 | 20557A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 3.9L V6 | WS17765A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS20557A | 🇺🇸 US 🇨🇦 CA | 2.622 Bore Diameter0.311 Width | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Timing Cover Seal parts are listed for the 2009 Buick Lucerne, from SKF and WJB / INMOTION PARTS.
Listed part numbers: SKF 17765A, SKF 20557A and WJB / INMOTION PARTS WS17765A, plus the other parts above.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 3.9L V6 | S847 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.9L V6 | S847 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.9L V6 | 12568125 | 🇺🇸 US 🇨🇦 CA | 25 Teeth | View on Amazon |
| INA Fits: 3.9L V6 | ZSS847 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.9L V6 | G55847 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
5 Timing Crank Sprocket parts are listed for the 2009 Buick Lucerne, from S.A. GEAR, CLOYES, GM GENUINE and 2 other brands. S.A. GEAR S847 carries the "Popular" badge.
Part numbers include S.A. GEAR S847 and GM GENUINE 12568125, among others listed above.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 4.6L V8 | S772T | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12577433 | 🇺🇸 US 🇨🇦 CA | Intermediate Gear | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | G55772 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Idler sprockets.
3 Timing Idler Sprocket parts for the 2009 Buick Lucerne come from 3 brands — FVP, GM GENUINE and PREFERRED COMPONENTS INC.
Listed part numbers: FVP S772T, GM GENUINE 12577433 and PREFERRED COMPONENTS INC G55772.
Torque Strut Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 4.6L V8 | EM3140 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| SKP Fits: 3.9L V6 | SKMA5438 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 4.6L V8 | SKM3140 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 3.9L V6 | 3139 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 20760911 | 🇺🇸 US 🇨🇦 CA | Right Upper | View on Amazon |
| WESTAR Popular Fits: 4.6L V8 | EM3140 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ANCHOR Fits: 4.6L V8 | 3140 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.9L V6 | A5438 | 🇺🇸 US 🇨🇦 CA | RearSolid | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5387 | 🇺🇸 US 🇨🇦 CA | RearSolid | View on Amazon |
| PIONEER Fits: 3.9L V6 | 635438 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WESTAR Fits: 3.9L V6 | EM3139 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 4.6L V8 | 625387 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
12 Torque Strut Mount parts for the 2009 Buick Lucerne come from 7 brands — SKP, ANCHOR, WESTAR and 4 other brands. The "Popular" part is ANCHOR 3139.
The Economy section: 3 options from SKP and FVP. FVP EM3140 is listed in this group.
Standard Replacement: 8 parts, from ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is ANCHOR 3139.
1 further part sits outside the graded sections, with the same engine-level match.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12588111 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12588112 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the Valve covers.
2 Valve Cover parts for the 2009 Buick Lucerne come from GM GENUINE.
Listed part numbers: GM GENUINE 12588111 and GM GENUINE 12588112.
Valve Cover Bolt / Screw
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 11589120 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12557829 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.
2 Valve Cover Bolt / Screw parts for the 2009 Buick Lucerne come from GM GENUINE.
This group includes GM GENUINE 11589120 and GM GENUINE 12557829.
Valve Cover Bolt Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12557831 | 🇺🇸 US 🇨🇦 CA | Gray | View on Amazon |
This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: GM GENUINE 12557831.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.9L V6 | AVC350S | 🇺🇸 US 🇨🇦 CA | Includes Grommets | View on Amazon |
| FEL-PRO Popular Fits: 3.9L V6 | VS50442R | 🇺🇸 US 🇨🇦 CA | Permadry RubberValve Cover Grommets Not Included | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | VS50526R | 🇺🇸 US 🇨🇦 CA | Perma Dry Molded RubberIncludes Spark Plug Tube Seals and Valve Cover Grommets | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 12581818 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.9L V6 | VS50173A | 🇺🇸 US 🇨🇦 CA | Contains GrommetsSet | View on Amazon |
| APEX Fits: 3.9L V6 | AVC350 | 🇺🇸 US 🇨🇦 CA | Does Not Include Grommets | View on Amazon |
| APEX Fits: 4.6L V8 | AVC369S | 🇺🇸 US 🇨🇦 CA | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| ELRING Fits: 3.9L V6 | 754490 | 🇺🇸 US 🇨🇦 CA | Material: Multiple | View on Amazon |
| ENGINETECH Fits: 3.9L V6 | VCC189A | 🇺🇸 US | SetIncludes Grommets | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 10154775 | 🇺🇸 US 🇨🇦 CA | Single Gasket | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12581816 | 🇺🇸 US 🇨🇦 CA | SPARK PLUG HOLES | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12581817 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | VS50174 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | VS50173 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | VS50331 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| ULTRA-POWER Fits: 3.9L V6 | VS50442R | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Gasket(s) Included | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 151063001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 151068901 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
18 Valve Cover Gasket parts are listed for the 2009 Buick Lucerne, from GM GENUINE, MAHLE / CLEVITE, APEX and 5 other brands. APEX AVC350S carries the "Popular" badge.
Valve Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 3.9L V6 | AES303 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Fits: 3.9L V6 | ES71044 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | GS33405 | 🇺🇸 US 🇨🇦 CA | KitSet | View on Amazon |
| VICTOR REINZ Fits: 3.9L V6 | 151013801 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the Valve Cover grommets.
4 Valve Cover Grommet parts are listed for the 2009 Buick Lucerne, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
This group includes APEX AES303, FEL-PRO ES71044 and MAHLE / CLEVITE GS33405 and the remaining parts above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.9L V6 | GD3053 | 🇺🇸 US | Iron | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | GD3056 | 🇺🇸 US | Iron | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | GD3057 | 🇺🇸 US | Iron | View on Amazon |
| QUALCAST Fits: 3.9L V6 | 303053 | 🇺🇸 US 🇨🇦 CA | 2.115 OAL. 0.3154 I.D. 0.500 O.D. | View on Amazon |
| QUALCAST Fits: 3.9L V6 | 303053H | 🇺🇸 US 🇨🇦 CA | 2.115 OAL. 0.3154 I.D. 0.500 O.D. Hardened | View on Amazon |
| SBI Fits: 3.9L V6 | 1403053 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.3154 I.D. | View on Amazon |
| SBI Fits: 4.6L V8 | 1403056 | 🇺🇸 US 🇨🇦 CA | Intake0.2350 I.D. | View on Amazon |
| SBI Fits: 4.6L V8 | 1403057 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2350 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
8 Valve Guide parts are listed for the 2009 Buick Lucerne, from ENGINETECH, SBI and QUALCAST.
Part numbers include ENGINETECH GD3053, ENGINETECH GD3056 and ENGINETECH GD3057, among others listed above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | L2319 | 🇺🇸 US | Hydraulic | View on Amazon |
| GM GENUINE Popular Fits: 3.9L V6 | HL118 | 🇺🇸 US 🇨🇦 CA | Lifter Type: Hydraulic Roller | View on Amazon |
| MELLING Popular Fits: 3.9L V6 | JB2270 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | JB7524 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| AJUSA Fits: 4.6L V8 | 85018700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.9L V6 | L2270 | 🇺🇸 US | HydraulicRoller Follower | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | HL129 | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| QUALCAST Fits: 3.9L V6 | 362270 | 🇺🇸 US 🇨🇦 CA | Hydraulic Roller | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 367082 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster | View on Amazon |
| SBI Fits: 3.9L V6 | VL138 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.842 Body Diameter | View on Amazon |
| SBI Fits: 4.6L V8 | VL175 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: 3.9L V6 | HT2270 | 🇺🇸 US 🇨🇦 CA | Hydraulic Roller Lifters | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | HT2307 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
13 Valve Lifter parts are listed for the 2009 Buick Lucerne, from ENGINETECH, GM GENUINE, MELLING and 4 other brands. ENGINETECH L2319 carries the "Popular" badge.
Valve Lifter Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12574774 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the guides that keep each lifter aligned.
One part is listed for the 2009 Buick Lucerne — GM GENUINE 12574774.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 3.9L V6 | 21193755 | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| SBI Fits: 3.9L V6 | SB193755 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Aluminum Cylinder Head | View on Amazon |
This table covers the Valve seats.
2 Valve Seat parts for the 2009 Buick Lucerne come from 2 brands — QUALCAST and SBI.
Listed part numbers: QUALCAST 21193755 and SBI SB193755.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12565199 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 3.9L V6 | 1601607 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust2.081 Length | View on Amazon |
| SBI Fits: 4.6L V8 | 1601634 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust1.656 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
3 Valve Spring parts for the 2009 Buick Lucerne come from 2 brands — SBI and GM GENUINE.
Part numbers include GM GENUINE 12565199, SBI 1601607 and SBI 1601634.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 10166344 | 🇺🇸 US 🇨🇦 CA | EXH | View on Amazon |
| MELLING Fits: 3.9L V6 | VSR709 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Spring retainers.
2 Valve Spring Retainer parts for the 2009 Buick Lucerne come from 2 brands — GM GENUINE and MELLING.
This group includes GM GENUINE 10166344 and MELLING VSR709.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.9L V6 | VL760 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.9L V6 | EPC291 | 🇺🇸 US | Flex FuelSingle Round Groove | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 10166345 | 🇺🇸 US 🇨🇦 CA | Material: Alloy Steel | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 01647209 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.9L V6 | 345005 | 🇺🇸 US 🇨🇦 CA | 0.314 Stem. Round Bead In Middle. | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 3407209 | 🇺🇸 US 🇨🇦 CA | 1 Round Groove | View on Amazon |
| SBI Fits: 3.9L V6 | 1211085 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2900 Length | View on Amazon |
| SBI Fits: 4.6L V8 | 1211081 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2870 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
8 Valve Spring Retainer Keeper parts for the 2009 Buick Lucerne come from 5 brands — GM GENUINE, QUALCAST, SBI and 2 other brands. The "Popular" part is MELLING VL760.
Listed part numbers: MELLING VL760, ENGINETECH EPC291 and GM GENUINE 10166345, plus the other parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.9L V6 | S900V | 🇺🇸 US | Viton | View on Amazon |
| ENGINETECH Popular Fits: 4.6L V8 | S420V | 🇺🇸 US | Viton | View on Amazon |
| FEL-PRO Popular Fits: 3.9L V6 | SS710391 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | SS71043 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Popular Fits: 3.9L V6 | 12482063 | 🇺🇸 US 🇨🇦 CA | SetContains 8 Seals | View on Amazon |
| APEX Fits: 3.9L V6 | AVS3098 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AVS3103 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 3.9L V6 | 876100 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1 | View on Amazon |
| ELRING Fits: 3.9L V6 | 876110 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2 | View on Amazon |
| GM GENUINE Fits: 3.9L V6 | 12482062 | 🇺🇸 US 🇨🇦 CA | SetContains 8 Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V6 | SS45921A | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | SS45930 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 3.9L V6 | 3890045 | 🇺🇸 US 🇨🇦 CA | Viton Top Hat | View on Amazon |
| QUALCAST Fits: 3.9L V6 | 3890145 | 🇺🇸 US 🇨🇦 CA | Viton Top Hat | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 3835445 | 🇺🇸 US 🇨🇦 CA | Viton Top Hat | View on Amazon |
| SBI Fits: 3.9L V6 | 1221337 | 🇺🇸 US 🇨🇦 CA | IntakeViton Material | View on Amazon |
| SBI Fits: 3.9L V6 | 1221338 | 🇺🇸 US 🇨🇦 CA | ExhaustViton Material | View on Amazon |
| SBI Fits: 4.6L V8 | 1221349 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 121007801 | 🇺🇸 US 🇨🇦 CA | SetSealing Surface Type: Flanged | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
19 Valve Stem Seal parts are listed for the 2009 Buick Lucerne, from QUALCAST, SBI, ENGINETECH and 6 other brands. ENGINETECH S900V carries the "Popular" badge.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.9L V6 | 917298 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| ROSTRA Popular Fits: 3.9L V6 | 790033 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Popular Fits: 4.6L V8 | SK917010 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Popular Fits: 3.9L V6 | 917298 | 🇺🇸 US 🇨🇦 CA | Variable Valve Timing Adjuster Magnet | View on Amazon |
| GATES Fits: 3.9L V6 | VVS210 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 3.9L V6 | 2VTS0186 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| SPECTRA PREMIUM Fits: all 2009 Lucerne engines | VTS1200 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| SPECTRA PREMIUM Fits: 4.6L V8 | VTS1002 | 🇺🇸 US 🇨🇦 CA | Camshaft Valve | View on Amazon |
| WALKER PRODUCTS Fits: all 2009 Lucerne engines | 5901289 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 3.9L V6 | 2T1179 | 🇺🇸 US 🇨🇦 CA | Magnet Sensor | View on Amazon |
| WELLS Fits: 4.6L V8 | 2T1012 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NTK Popular Fits: 4.6L V8 | VV0012 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.9L V6 | VTS170 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| NTK Fits: 3.9L V6 | VV0138 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 3.9L V6 | VVT184 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | VVT102 | 🇺🇸 US 🇨🇦 CA | Blue Streak | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
16 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2009 Buick Lucerne, from SPECTRA PREMIUM, WELLS, NTK and 9 other brands. DORMAN 917298 carries the "Popular" badge. 2 parts fit every engine; the other 14 are engine-specific.
Economy: 11 parts, from SPECTRA PREMIUM, WELLS, DORMAN and 6 other brands. A representative part number is DORMAN 917298.
The Standard Replacement section: 5 options from NTK, STANDARD MOTOR PRODUCTS and CLOYES. NTK VV0012 is listed in this group.
Variable Valve Timing (VVT) Solenoid Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12579603 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
One part is listed for the 2009 Buick Lucerne — GM GENUINE 12579603.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.9L V6 | 12580520 | 🇺🇸 US 🇨🇦 CA | 3Adjuster Magnet | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: GM GENUINE 12580520.
Variable Valve Timing (VVT) Sprocket
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.9L V6 | 918190 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 3.9L V6 | 918190 | 🇺🇸 US 🇨🇦 CA | Cam Gear | View on Amazon |
| VAICO Fits: 3.9L V6 | V401618 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.9L V6 | 12701663 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.9L V6 | VC158 | 🇺🇸 US 🇨🇦 CA | Engine Variable Valve Timing (VVT) Sprocket | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.9L V6 | G58821 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 3.9L V6 | 3T1147 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
7 Variable Valve Timing (VVT) Sprocket parts are listed for the 2009 Buick Lucerne, from DORMAN, ULTRA-POWER, VAICO and 4 other brands. DORMAN 918190 carries the "Popular" badge.
Economy: 3 parts, from DORMAN, ULTRA-POWER and VAICO. A representative part number is DORMAN 918190.
The Standard Replacement section: 4 options from GM GENUINE, CLOYES, PREFERRED COMPONENTS INC and 1 other brand. GM GENUINE 12701663 is listed in this group.
This group includes DORMAN 918190 and VAICO V401618 and the remaining parts above.
Buying Engine Parts for a 2009 Buick Lucerne
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Oil .
Frequently Asked Questions
How many engine parts fit the 2009 Buick Lucerne?
Our catalog currently lists 605 engine parts for the 2009 Buick Lucerne across 87 subcategories and 67 brands, covering both the 3.9L V6 and the 4.6L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2009 Buick Lucerne engines?
Some do. 81 parts fit every engine; the other 524 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2009 Buick Lucerne?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2009 Buick Lucerne?
Oil rows on this page include SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2009 Buick Lucerne was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2009 Buick Lucerne?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2009 Buick Lucerne
Engine Parts for Other Buick Lucerne Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.