2010 Buick Lucerne Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2010 Buick Lucerne has 96 engine parts with verified fitment on this page — 23 part types and 25 brands, covering both the 3.9L V6 and the 4.6L V8. Each part includes a manufacturer part number and application notes.

On the 2010 Buick Lucerne, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Crankshaft Seal (20 parts), Cylinder Head Gasket (13 parts) and Cylinder Head Gasket Set (8 parts). The other 20 part types cover the remaining 55 parts.

Camshaft

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 19301053
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 3.9L V6 CC509
🇺🇸 US
Full Set
Fitment notes — ENGINETECH CC509
Full Set
Flex Fuel
View on
Amazon
GM GENUINE Fits: 3.9L V6 89018072
🇺🇸 US 🇨🇦 CA
# 2, # 3
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 SH2121S
🇺🇸 US 🇨🇦 CA
Full Set
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 3.9L V6 BB129J
🇺🇸 US
Set
Fitment notes — ENGINETECH BB129J
Set
Flex Fuel
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 CB1874A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Pair
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 CB1874A6
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Set
Fitment notes — MAHLE / CLEVITE CB1874A6
A Series (Aluminum)Set
(Size: Standard)
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 11519680
🇺🇸 US 🇨🇦 CA
M9X1X53
View on
Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
APEX Popular Fits: 3.9L V6 ACS3098
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Popular Fits: 3.9L V6 CS26324
🇺🇸 US 🇨🇦 CA
SetMolded Rubber Oil Pan Gasket(s) Included
View on
Amazon
ENGINETECH Fits: 3.9L V6 C237CSA
🇺🇸 US
Flex Fuel
View on
Amazon
FEL-PRO Fits: 3.9L V6 CS26324
🇺🇸 US 🇨🇦 CA
Permadry Rubber Oil Pan Gasket(s) Included
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 CS54648
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 3.9L V6 081008501
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 3.9L V6 BC208J
🇺🇸 US
Contains Aluminum and TRI-Metal bearingsSet
Fitment notes — ENGINETECH BC208J
Contains Aluminum and TRI-Metal bearingsSet
Flex Fuel
View on
Amazon
GM GENUINE Fits: 3.9L V6 89060549
🇺🇸 US 🇨🇦 CA
Position # 1
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 MS2275A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Contains Tri-Metal Bearing for Position Number 4
Fitment notes — MAHLE / CLEVITE MS2275A
A Series (Aluminum)Contains Tri-Metal Bearing for Position Number 4Set
Flex Fuel
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 3.9L V6 99176
🇺🇸 US 🇨🇦 CA
Front0.563 IN Width
Fitment notes — NATIONAL 99176
Front0.563 IN Width2.063 IN Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 3.9L V6 WS99176
🇺🇸 US 🇨🇦 CA
Installation Depth: 0.81299999999999994 InShaft Diameter Minimum (In): 1.7609999999999999 In
Fitment notes — WJB / INMOTION PARTS WS99176
Installation Depth: 0.81299999999999994 InShaft Diameter Minimum (In): 1.7609999999999999 InShaft Maximum Diameter (In): 1.7669999999999999 InFront
View on
Amazon
BCA Fits: 3.9L V6 NS99298
🇺🇸 US 🇨🇦 CA
Rearflex fuel
View on
Amazon
NATIONAL Fits: 3.9L V6 99298
🇺🇸 US 🇨🇦 CA
Rear0.563 IN Width
Fitment notes — NATIONAL 99298
Rear0.563 IN Width3.359 IN Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.9L V6 SR3546
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
WJB / INMOTION PARTS Fits: 3.9L V6 WS99298
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 3.9L V6 29621
🇺🇸 US 🇨🇦 CA
Front61.57/61.37 MM O.D.
View on
Amazon
NATIONAL Popular Fits: 3.9L V6 9845
🇺🇸 US 🇨🇦 CA
Front0.375 IN Width
Fitment notes — NATIONAL 9845
Front0.375 IN Width2.416 IN Outside Diameter
View on
Amazon
TIMKEN Popular Fits: 3.9L V6 9845
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 3.9L V6 WS9845
🇺🇸 US 🇨🇦 CA
Housing Bore: 2.4089999999999998 InInside Diameter: 1.7629999999999999 In
Fitment notes — WJB / INMOTION PARTS WS9845
Housing Bore: 2.4089999999999998 InInside Diameter: 1.7629999999999999 InThickness: 0.375 InFront
View on
Amazon
APEX Fits: 3.9L V6 ABS397
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
BCA Fits: 3.9L V6 NS9845
🇺🇸 US 🇨🇦 CA
Front0.375 IN Width
Fitment notes — BCA NS9845
Front0.375 IN Width2.42 IN Outside Diameter
View on
Amazon
BCA Fits: 3.9L V6 NS4307V
🇺🇸 US 🇨🇦 CA
Viton
Fitment notes — BCA NS4307V
Viton
Rear0.374 IN Width3.633 IN Outside Diameter
View on
Amazon
BCA Fits: 3.9L V6 NS5273
🇺🇸 US 🇨🇦 CA
PTFE Rubber
Fitment notes — BCA NS5273
PTFE Rubber
RearHeavy Duty
View on
Amazon
ENGINETECH Fits: 3.9L V6 S5044
🇺🇸 US
Viton1 piece Offset Lip
Fitment notes — ENGINETECH S5044
Viton1 piece Offset Lip
Flex Fuel1 PieceOffset Lip
View on
Amazon
FEL-PRO Fits: 3.9L V6 BS40625
🇺🇸 US 🇨🇦 CA
PTFE RubberIncludes Sleeve
Fitment notes — FEL-PRO BS40625
PTFE RubberIncludes Sleeve
Rear1 Piece11.0 (mm) Thick
View on
Amazon
GM GENUINE Fits: 3.9L V6 12592195
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 JV1633
🇺🇸 US 🇨🇦 CA
PTFE (Polytetrafluoroethylene)
Fitment notes — MAHLE / CLEVITE JV1633
PTFE (Polytetrafluoroethylene)
Rear
View on
Amazon
NATIONAL Fits: 3.9L V6 4307V
🇺🇸 US 🇨🇦 CA
Viton
Fitment notes — NATIONAL 4307V
Viton
Rear0.374 IN Width3.633 IN Outside Diameter
View on
Amazon
NATIONAL Fits: 3.9L V6 5273
🇺🇸 US 🇨🇦 CA
PTFE Rubber
Fitment notes — NATIONAL 5273
PTFE Rubber
Rear0.385 IN Width3.637 IN Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.9L V6 SR3932
🇺🇸 US 🇨🇦 CA
View on
Amazon
SCHAEFFLER Fits: 3.9L V6 SS3324
🇺🇸 US 🇨🇦 CA
Rear3.64" O.D. X 0.35" Width
View on
Amazon
SKF Fits: 3.9L V6 29799
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
TIMKEN Fits: 3.9L V6 4307V
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
VICTOR REINZ Fits: 3.9L V6 191007101
🇺🇸 US 🇨🇦 CA
PTFESet
Fitment notes — VICTOR REINZ 191007101
PTFESet
Rear11mm1 Piece
View on
Amazon
WJB / INMOTION PARTS Fits: 3.9L V6 WS4307V
🇺🇸 US 🇨🇦 CA
RearViton Type
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 12624612
🇺🇸 US 🇨🇦 CA
without Secondary Air InjectionMachined
Fitment notes — GM GENUINE 12624612
without Secondary Air InjectionMachinedNew
View on
Amazon
GM GENUINE Fits: 3.9L V6 19333093
🇺🇸 US 🇨🇦 CA
Reman
Fitment notes — GM GENUINE 19333093
Reman
RightAssembly with ValvesNon SAI
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 14024244
🇺🇸 US 🇨🇦 CA
SPLIT,15X12.5,CHAM,STL
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 3.9L V6 ES72230
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO ES72230
Set
Head Bolts with Washers
View on
Amazon
MAHLE / CLEVITE Popular Fits: 3.9L V6 GS33615
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33615
Cylinder Head Bolt KitSetSteel
View on
Amazon
APEX Fits: 3.9L V6 AHB398
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
ENGINETECH Fits: 3.9L V6 HBK256
🇺🇸 US
Set
Fitment notes — ENGINETECH HBK256
Set
Flex Fuel
View on
Amazon
FEL-PRO Fits: 3.9L V6 ES722301
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO ES722301
Set
Head Bolts with Washers
View on
Amazon
GM GENUINE Fits: 3.9L V6 11569648
🇺🇸 US 🇨🇦 CA
Single UseM11X1.5X115,62 Thread
View on
Amazon
VICTOR REINZ Fits: 3.9L V6 141009601
🇺🇸 US 🇨🇦 CA
SetImproved Design
Fitment notes — VICTOR REINZ 141009601
SetImproved Design
Head Bolts with Washers
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 3.9L V6 26325PT
🇺🇸 US 🇨🇦 CA
Permatorquemls Laserweld Technology
Fitment notes — FEL-PRO 26325PT
Permatorquemls Laserweld Technology
Right
View on
Amazon
FEL-PRO Popular Fits: 3.9L V6 26324PT
🇺🇸 US 🇨🇦 CA
Permatorquemls Laserweld Technology
Fitment notes — FEL-PRO 26324PT
Permatorquemls Laserweld Technology
Left
View on
Amazon
ULTRA-POWER Popular Fits: 3.9L V6 26324PT
🇺🇸 US 🇨🇦 CA
Head Bolt Replacement RecommendedHead Bolts Not Included
Fitment notes — ULTRA-POWER 26324PT
Head Bolt Replacement RecommendedHead Bolts Not Included
Leftwith Laserweld Technology
View on
Amazon
APEX Fits: 3.9L V6 AHG398R
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
APEX Fits: 3.9L V6 AHG398L
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
ELRING Fits: 3.9L V6 835140
🇺🇸 US 🇨🇦 CA
RightFlex Fuel
Fitment notes — ELRING 835140
RightFlex FuelCX ModelBody code: HP69
View on
Amazon
ELRING Fits: 3.9L V6 835150
🇺🇸 US 🇨🇦 CA
LeftFlex Fuel
Fitment notes — ELRING 835150
LeftFlex FuelCX ModelBody code: HP69
View on
Amazon
GM GENUINE Fits: 3.9L V6 12624627
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
GM GENUINE Fits: 3.9L V6 12624628
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 54649
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54649
Multi-Layered Steel
Left
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 54648
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54648
Multi-Layered Steel
Right
View on
Amazon
VICTOR REINZ Fits: 3.9L V6 611047800
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
VICTOR REINZ Fits: 3.9L V6 611050500
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 3.9L V6 C237HSA
🇺🇸 US
with MLS head gaskets
Fitment notes — ENGINETECH C237HSA
with MLS head gaskets
Flex Fuel
View on
Amazon
ULTRA-POWER Popular Fits: 3.9L V6 HS26324PT
🇺🇸 US 🇨🇦 CA
Head Bolts Not IncludedHead Bolt Replacement Recommended
Fitment notes — ULTRA-POWER HS26324PT
Head Bolts Not IncludedHead Bolt Replacement RecommendedIncludes Valve Stem Seals, Molded Rubber Valve Cover Gasket(s), Intake Manifold Gaskets, Premium Valve Stem Seals
View on
Amazon
APEX Fits: 3.9L V6 AHS3098
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 3.9L V6 753360
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — ELRING 753360
Includes Valve Stem Seals
Flex FuelCX ModelBody code: HP69
View on
Amazon
FEL-PRO Fits: 3.9L V6 HS26324PT
🇺🇸 US 🇨🇦 CA
Perma Dry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Valve Stem Seals
View on
Amazon
FEL-PRO Fits: 3.9L V6 HS26324PTVK
🇺🇸 US 🇨🇦 CA
Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals
Fitment notes — FEL-PRO HS26324PTVK
Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals
Head Bolts with WashersHead Bolt Replacement Recommended
View on
Amazon
MAHLE / CLEVITE Fits: 3.9L V6 HS54648
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS54648
Includes Valve Stem Seals
Exhaust Pipe Gasket Not Included
View on
Amazon
VICTOR REINZ Fits: 3.9L V6 021049101
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Plug

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 11610259
🇺🇸 US 🇨🇦 CA
M12X1.5X21.2Hex, Socket
View on
Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Cylinder Head Spacer Shim

Brand Part Number Markets Notes Buy
SBI Fits: 3.9L V6 2302182
🇺🇸 US 🇨🇦 CA
New Height - N/A
View on
Amazon

This table covers the Cylinder Head Spacer shims.

Engine Block Heater

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 12586687
🇺🇸 US 🇨🇦 CA
Engine Block Heater (K05)
View on
Amazon
KAT'S HEATERS Fits: 3.9L V6 11484
🇺🇸 US 🇨🇦 CA
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 11484
Freeze Plug Heater
Threaded Electrical Plug End28mm400 WattsEasiest Mounting Location: Right CenterThreadedOEM Thermostatically Controlled Heat
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Cover

Brand Part Number Markets Notes Buy
TECHPRO Fits: 3.9L V6 GM1228108
🇺🇸 US 🇨🇦 CA
LowerAir Deflector Assembly
View on
Amazon
VARIOUS MFR Fits: 3.9L V6 GM1228108
🇺🇸 US 🇨🇦 CA
CAPA Certified
Fitment notes — VARIOUS MFR GM1228108
CAPA Certified
LowerAir Deflector Assembly [CAPA Certified]
View on
Amazon

This table covers the Engine covers.

Engine Cover Grommet

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 12594875
🇺🇸 US 🇨🇦 CA
Material: Rubber
Fitment notes — GM GENUINE 12594875
Material: Rubber
Top
View on
Amazon

This table covers the Engine Cover grommets.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 3.9L V6 50552000
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 3.9L V6 AFS3098
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 3.9L V6 V4429
🇺🇸 US
Flex Fuel.3135 stem
Fitment notes — ENGINETECH V4429
Flex Fuel.3135 stem1.523 Head
View on
Amazon
MELLING Fits: 3.9L V6 V3044
🇺🇸 US 🇨🇦 CA
View on
Amazon
QUALCAST Fits: 3.9L V6 1013044
🇺🇸 US 🇨🇦 CA
1.523 Head Diameter.
View on
Amazon
SBI Fits: 3.9L V6 13044
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Harmonic Balancer

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 3.9L V6 12621646
🇺🇸 US 🇨🇦 CA
View on
Amazon
ATP Fits: 3.9L V6 102207
🇺🇸 US 🇨🇦 CA
Serpentine
View on
Amazon
DAYCO Fits: 3.9L V6 PB1544N
🇺🇸 US 🇨🇦 CA
Premium
View on
Amazon
DORMAN Fits: 3.9L V6 594266
🇺🇸 US 🇨🇦 CA
SerpentineDiameter
Fitment notes — DORMAN 594266
SerpentineDiameter6-9/16"Width: 1-3/4"Weight (lbs.): 4.1
View on
Amazon
PIONEER Fits: 3.9L V6 DA207
🇺🇸 US 🇨🇦 CA
Groove Quantity 6Serpentine
Fitment notes — PIONEER DA207
Groove Quantity 6SerpentineOuter Diameter: 6.58 In
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Fits: 3.9L V6 88176
🇺🇸 US 🇨🇦 CA
Except flange tear line
View on
Amazon
NATIONAL Fits: 3.9L V6 5000
🇺🇸 US 🇨🇦 CA
KitNitrile
Fitment notes — NATIONAL 5000
KitNitrile
Except flange tear line
View on
Amazon
WJB / INMOTION PARTS Fits: 3.9L V6 WS88176
🇺🇸 US 🇨🇦 CA
Material: Nickel Plated Formed Steel
Fitment notes — WJB / INMOTION PARTS WS88176
Material: Nickel Plated Formed Steel
without flange tear line
View on
Amazon

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.

Intake Manifold

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.9L V6 12611485
🇺🇸 US 🇨🇦 CA
UpperWATER PUMP
View on
Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Buying Engine Parts for a 2010 Buick Lucerne

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Cylinder Head Gasket .

Frequently Asked Questions

How many engine parts fit the 2010 Buick Lucerne?

Our catalog currently lists 96 engine parts for the 2010 Buick Lucerne across 23 subcategories and 25 brands, covering both the 3.9L V6 and the 4.6L V8. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2010 Buick Lucerne engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2010 Buick Lucerne?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2010 Buick Lucerne was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2010 Buick Lucerne?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2010 Buick Lucerne

Engine Parts for Other Buick Lucerne Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.