This page lists 296 engine parts for the 2011 Buick Lucerne, across 63 part types, covering both the 3.9L V6 and the 4.6L V8. Every part shows its brand, manufacturer part number and fitment notes.
On the 2011 Buick Lucerne, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 62 parts of the 296 listed are Oil (23 parts), Oil Filter (20 parts) and Timing Chain Guide / Damper (19 parts). The other 60 part types cover the remaining 234 parts.
The 2011 Buick Lucerne was sold with both the 3.9L V6 and the 4.6L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
59 brands supply engine parts for the 2011 Buick Lucerne, led by GM GENUINE (35 parts), FEL-PRO (19 parts) and MAHLE / CLEVITE (18 parts), plus 56 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2011 Buick Lucerne. 52 parts have it, including FEL-PRO TCS46011 (Camshaft Seal) and ENGINETECH GM281CSF (Conversion / Lower Gasket Set). Each part number opens a page with every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | TCS46011 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 01647477 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 4.6L V8 | ATC3680 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 67683 | 🇺🇸 US 🇨🇦 CA | Seal with Retainer Plate | View on Amazon |
| SCHAEFFLER Fits: 4.6L V8 | SS5566 | 🇺🇸 US 🇨🇦 CA | DOHC 32 Valve2.21" I:D X 2.21" O.D. X 0.26" Width | View on Amazon |
| SKF Fits: 4.6L V8 | 6455 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 4.6L V8 | TCS46011 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 811052900 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
8 Camshaft Seal parts for the 2011 Buick Lucerne come from 8 brands — FEL-PRO, GM GENUINE, APEX and 5 other brands. The "Popular" part is FEL-PRO TCS46011.
Listed part numbers: FEL-PRO TCS46011, GM GENUINE 01647477 and APEX ATC3680, plus the other parts above.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | BB310J | 🇺🇸 US | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 4.6L V8 | CR8003SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | CB1648P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Pair | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | 84825A | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Connecting Rod Bearing parts are listed for the 2011 Buick Lucerne, from ENGINETECH, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.
Part numbers include ENGINETECH BB310J, KING ENGINE BEARINGS CR8003SI and MAHLE / CLEVITE CB1648P, among others listed above.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12552947 | 🇺🇸 US 🇨🇦 CA | MJ9X1.0-4H6HX61.9 LONG | View on Amazon |
This table covers the Connecting Rod bolts.
This group shows a single part: GM GENUINE 12552947.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | GM281CSF | 🇺🇸 US | Engine VIN Code 6,9,S,YWater pump gaskets Not included | View on Amazon |
| APEX Fits: 4.6L V8 | ACS3135 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 4.6L V8 | CS261504 | 🇺🇸 US 🇨🇦 CA | Permadry Rubber Oil Pan Gasket(s) Included | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | CS261504 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Oil Pan Gasket(s) Included | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 081004801 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Conversion / Lower Gasket Set parts are listed for the 2011 Buick Lucerne, from ENGINETECH, APEX, FEL-PRO and 2 other brands. ENGINETECH GM281CSF carries the "Popular" badge.
Part numbers include ENGINETECH GM281CSF, APEX ACS3135 and FEL-PRO CS261504, among others listed above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | BC414J | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS2206P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS2206A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | 7319MA | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Crankshaft Main Bearing parts for the 2011 Buick Lucerne come from 3 brands — MAHLE / CLEVITE, ENGINETECH and SEALED POWER.
Listed part numbers: ENGINETECH BC414J, MAHLE / CLEVITE MS2206P and MAHLE / CLEVITE MS2206A, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | BS40670 | 🇺🇸 US 🇨🇦 CA | PTFE RubberIncludes Sleeve | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 12568025 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Popular Fits: 4.6L V8 | 710604 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX Fits: 4.6L V8 | ABS368A | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 4.6L V8 | ATC3691 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | TCS46076 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | JV1667 | 🇺🇸 US 🇨🇦 CA | Contains 12mm Wide Rear Main SealPTFE (Polytetrafluoroethylene) | View on Amazon |
| SKF Fits: 4.6L V8 | 37507 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 191008401 | 🇺🇸 US 🇨🇦 CA | PTFESet | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 191010501 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS710604 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Crankshaft Seal parts for the 2011 Buick Lucerne come from 8 brands — FEL-PRO, APEX, VICTOR REINZ and 5 other brands. The "Popular" part is FEL-PRO BS40670.
Cylinder Head
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12578243 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the cylinder heads that close the top of the block.
This group shows a single part: GM GENUINE 12578243.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 03522352 | 🇺🇸 US 🇨🇦 CA | HOLLOW DOWEL,15.675X28,CHAM BOTH ENDS,SAE 12L14,ZP | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
One part is listed for the 2011 Buick Lucerne — GM GENUINE 03522352.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | ES72217 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AHB370 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | HB279 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | GS33597 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 141012401 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
5 Cylinder Head Bolt parts are listed for the 2011 Buick Lucerne, from FEL-PRO, APEX, ENGINETECH and 2 other brands. FEL-PRO ES72217 carries the "Popular" badge.
Part numbers include FEL-PRO ES72217, APEX AHB370 and ENGINETECH HB279, among others listed above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | 26151PT | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | 26150PT | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| APEX Fits: 4.6L V8 | AHG370R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| APEX Fits: 4.6L V8 | AHG370L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ELRING Fits: 4.6L V8 | 835110 | 🇺🇸 US 🇨🇦 CA | RightBody code: HF69 | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 54356 | 🇺🇸 US 🇨🇦 CA | Graphite | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 54357 | 🇺🇸 US 🇨🇦 CA | Graphite | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 611038400 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 611038300 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Cylinder Head Gasket parts are listed for the 2011 Buick Lucerne, from FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO 26151PT carries the "Popular" badge.
Part numbers include FEL-PRO 26151PT, FEL-PRO 26150PT and APEX AHG370R, among others listed above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | GM281HSE | 🇺🇸 US | Water pump gaskets Not included | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | HS26150PT4 | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | GM281HSEWB | 🇺🇸 US | Includes Head BoltsWater pump gaskets Not included | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | HS26150PT4VK | 🇺🇸 US 🇨🇦 CA | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | HS54356C | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 021008701 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Cylinder Head Gasket Set parts are listed for the 2011 Buick Lucerne, from ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 1 other brand. ENGINETECH GM281HSE carries the "Popular" badge.
Listed part numbers: ENGINETECH GM281HSE, FEL-PRO HS26150PT4 and ENGINETECH GM281HSEWB, plus the other parts above.
Cylinder Head Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 11562126 | 🇺🇸 US 🇨🇦 CA | Cup, 32.03X7.88X1.27, S30400 Stainless Steel Per SAE J405 | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 01647544 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
2 Cylinder Head Plug parts for the 2011 Buick Lucerne come from GM GENUINE.
Part numbers include GM GENUINE 11562126 and GM GENUINE 01647544.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 4.6L V8 | 11484 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
This group shows a single part: KAT'S HEATERS 11484.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 4.6L V8 | GM1228108 | 🇺🇸 US 🇨🇦 CA | LowerAir Deflector Assembly | View on Amazon |
| VARIOUS MFR Fits: 4.6L V8 | GM1228108 | 🇺🇸 US 🇨🇦 CA | CAPA Certified | View on Amazon |
This table covers the Engine covers.
2 Engine Cover parts are listed for the 2011 Buick Lucerne, from TECHPRO and VARIOUS MFR.
This group includes TECHPRO GM1228108 and the remaining parts above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.6L V8 | 50551100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 4.6L V8 | GM281K5 | 🇺🇸 US | Kit contains (1) head Set, (1) lower Set & (1) water pump Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts are listed for the 2011 Buick Lucerne, from AJUSA and ENGINETECH.
Listed part numbers: AJUSA 50551100 and ENGINETECH GM281K5.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 4.6L V8 | 1013243 | 🇺🇸 US 🇨🇦 CA | 1.142 Head Diameter. | View on Amazon |
| SBI Fits: 4.6L V8 | 13243 | 🇺🇸 US 🇨🇦 CA | Superalloy | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Exhaust Valve parts for the 2011 Buick Lucerne come from 2 brands — QUALCAST and SBI.
This group includes QUALCAST 1013243 and SBI 13243.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 4.6L V8 | 102382 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 4.6L V8 | PB1544N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
| DORMAN Fits: 4.6L V8 | 594443 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
3 Harmonic Balancer parts are listed for the 2011 Buick Lucerne, from ATP, DAYCO and DORMAN.
This group includes ATP 102382, DAYCO PB1544N and DORMAN 594443.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 595005 | 🇺🇸 US 🇨🇦 CA | M14 X 1.50 X 48.4 mm | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11549124 | 🇺🇸 US 🇨🇦 CA | M14X1.5X48.4 | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts for the 2011 Buick Lucerne come from 2 brands — DORMAN and GM GENUINE.
This group includes DORMAN 595005 and GM GENUINE 11549124.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 19330172 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
This group shows a single part: GM GENUINE 19330172.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 11588352 | 🇺🇸 US 🇨🇦 CA | M6X1X48 | View on Amazon |
This table covers the Intake Manifold bolts.
One part is listed for the 2011 Buick Lucerne — GM GENUINE 11588352.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | MS96716 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AMS3692 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12588809 | 🇺🇸 US 🇨🇦 CA | Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS19706 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 111034001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts are listed for the 2011 Buick Lucerne, from FEL-PRO, APEX, GM GENUINE and 2 other brands. FEL-PRO MS96716 carries the "Popular" badge.
Part numbers include FEL-PRO MS96716, APEX AMS3692 and GM GENUINE 12588809, among others listed above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | V4362 | 🇺🇸 US | .2335 stem1.426 Head | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 102053 | 🇺🇸 US 🇨🇦 CA | 1.426 Head Diameter. | View on Amazon |
| SBI Fits: 4.6L V8 | 02053 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
3 Intake Valve parts for the 2011 Buick Lucerne come from 3 brands — ENGINETECH, QUALCAST and SBI.
Part numbers include ENGINETECH V4362, QUALCAST 102053 and SBI 02053.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 4.6L V8 | 3166 | 🇺🇸 US 🇨🇦 CA | FrontHydraulic | View on Amazon |
| WESTAR Popular Fits: 4.6L V8 | EM3166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ANCHOR Fits: 4.6L V8 | 3320 | 🇺🇸 US 🇨🇦 CA | RearHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5491HY | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5706 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| PIONEER Fits: 4.6L V8 | 613166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| PIONEER Fits: 4.6L V8 | 615706 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WESTAR Fits: 4.6L V8 | EM4212 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
8 Motor Mount parts for the 2011 Buick Lucerne come from 4 brands — ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 1 other brand. The "Popular" part is ANCHOR 3166.
This group includes ANCHOR 3166, WESTAR EM3166 and ANCHOR 3320 and the remaining parts above.
Motor Mount Bracket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 11569601 | 🇺🇸 US 🇨🇦 CA | M12X1.75X108.4 | View on Amazon |
This table covers the Motor Mount Bracket bolts.
One part is listed for the 2011 Buick Lucerne — GM GENUINE 11569601.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 4.6L V8 | 300607 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WESTAR Fits: 4.6L V8 | ETK074 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Motor Mount kits.
2 Motor Mount Kit parts for the 2011 Buick Lucerne come from 2 brands — ANCHOR and WESTAR.
This group includes ANCHOR 300607 and WESTAR ETK074.
Oil
Summary: Notes list SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 4.6L V8 | 20138 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-305 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 4.6L V8 | 20228 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: 4.6L V8 | 125195 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 4.6L V8 | 124315 | 🇺🇸 US 🇨🇦 CA | 5W-30Mobil 1 Advanced | View on Amazon |
| VALVOLINE Popular Fits: 4.6L V8 | VV955 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| IDEMITSU Fits: 4.6L V8 | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| LIQUI MOLY Fits: 4.6L V8 | 20136 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.6L V8 | 20226 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-301 Liter | View on Amazon |
| LUCAS OIL Fits: 4.6L V8 | 10049 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: 4.6L V8 | 18005 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| LUCAS OIL Fits: 4.6L V8 | 18008 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 0W-306 Gallon | View on Amazon |
| MOBIL Fits: 4.6L V8 | 112627 | 🇺🇸 US 🇨🇦 CA | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| PENTOSIN Fits: 4.6L V8 | 8044214 | 🇺🇸 US 🇨🇦 CA | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 4.6L V8 | 8044216 | 🇺🇸 US 🇨🇦 CA | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 891678 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 904564 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 891670 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 904566 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 881164 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 4.6L V8 | 103767 | 🇺🇸 US 🇨🇦 CA | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 4.6L V8 | 123842 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | VV179 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 881169 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
23 Oil parts for the 2011 Buick Lucerne come from 6 brands — VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. The "Popular" part is LIQUI MOLY 20138.
The Full Synthetic section lists 19 options from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands — full-synthetic oils. LIQUI MOLY 20138 is listed in this group.
In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 4 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 103767.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.6L V8 | ES73360 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2011 Buick Lucerne — FEL-PRO ES73360.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 4.6L V8 | 238 | 🇺🇸 US 🇨🇦 CA | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 4.6L V8 | 153 | 🇺🇸 US 🇨🇦 CA | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
HAYDEN supplies both parts for the 2011 Buick Lucerne.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.6L V8 | 584210 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 6,07 | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | 73889 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 24504031 | 🇺🇸 US 🇨🇦 CA | 6.07 ID1.78 Diameter | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Oil Dipstick / Tube Seal parts are listed for the 2011 Buick Lucerne, from ELRING, FEL-PRO and GM GENUINE.
Listed part numbers: ELRING 584210, FEL-PRO 73889 and GM GENUINE 24504031.
Oil Drain Plug
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.6L V8 | 090175 | 🇺🇸 US 🇨🇦 CA | Integrated GasketM12 x 1.75 Thread | View on Amazon |
Twist Drain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 092018 | 🇺🇸 US 🇨🇦 CA | Thread Size: M12-1.75Twist Style | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.6L V8 | 090034 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 Thread | View on Amazon |
| AGS Fits: 4.6L V8 | ODP00009 | 🇺🇸 US 🇨🇦 CA | M12x1.75 | View on Amazon |
| ELRING Fits: 4.6L V8 | 823400 | 🇺🇸 US 🇨🇦 CA | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11562588 | 🇺🇸 US 🇨🇦 CA | with SealExc. Magnet | View on Amazon |
| VAICO Fits: 4.6L V8 | V400755 | 🇺🇸 US 🇨🇦 CA | Thread Size: M 12 X 1,75Includes Gasket | View on Amazon |
This table covers the drain plugs in the oil pan.
7 Oil Drain Plug parts for the 2011 Buick Lucerne come from 5 brands — DORMAN, AGS, ELRING and 2 other brands. The "Popular" part is DORMAN 090175.
The Economy section lists 1 option from DORMAN — the catalog's value-priced group. DORMAN 090175 is listed in this group.
In the Twist Drain grade, DORMAN supplies 1 part: grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 092018.
5 further parts sit outside the graded sections, with the same engine-level match.
Listed part numbers: DORMAN 090175, DORMAN 092018 and DORMAN 090034, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | 70820 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 12616850 | 🇺🇸 US 🇨🇦 CA | Diameter 19.39 | View on Amazon |
| AJUSA Fits: 4.6L V8 | 01288800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 4.6L V8 | 097119 | 🇺🇸 US 🇨🇦 CA | Rubber Gasket | View on Amazon |
| DORMAN Fits: 4.6L V8 | 97119 | 🇺🇸 US 🇨🇦 CA | Rubber GasketRubber | View on Amazon |
| ELRING Fits: 4.6L V8 | 056130 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | 71244 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 097119 | 🇺🇸 US 🇨🇦 CA | ID: 0.448"RUBBER GASKET | View on Amazon |
| VAICO Fits: 4.6L V8 | V401110 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.6L V8 | 711351300 | 🇺🇸 US 🇨🇦 CA | 0.4150 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
10 Oil Drain Plug Gasket parts are listed for the 2011 Buick Lucerne, from FEL-PRO, DORMAN, GM GENUINE and 5 other brands. FEL-PRO 70820 carries the "Popular" badge.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 4.6L V8 | FC208 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| MOTORAD Popular Fits: 4.6L V8 | MO99 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CALORSTAT Fits: 4.6L V8 | OC2314 | 🇺🇸 US 🇨🇦 CA | PlasticTwist-On | View on Amazon |
| DORMAN Fits: 4.6L V8 | 42315 | 🇺🇸 US 🇨🇦 CA | with SAE 5W30 On Cap | View on Amazon |
| GATES Fits: 4.6L V8 | 31103 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 4.6L V8 | SKMO99 | 🇺🇸 US 🇨🇦 CA | with Plastic cap | View on Amazon |
This table covers the caps on the oil filler neck.
6 Oil Filler Cap parts for the 2011 Buick Lucerne come from 6 brands — ACDELCO, MOTORAD, CALORSTAT and 3 other brands. The "Popular" part is ACDELCO FC208.
This group includes ACDELCO FC208, MOTORAD MO99 and CALORSTAT OC2314 and the remaining parts above.
Oil Filler Cap Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.6L V8 | 73193 | 🇺🇸 US 🇨🇦 CA | Services OEM bonded Cap sealAftermarket Design | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 24100002 | 🇺🇸 US 🇨🇦 CA | Size # 32027.94MM Inner Diameter | View on Amazon |
This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Filler Cap Gasket parts are listed for the 2011 Buick Lucerne, from FEL-PRO and GM GENUINE.
This group includes FEL-PRO 73193 and GM GENUINE 24100002.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Popular Fits: 4.6L V8 | PH59 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: YESSpin-On Filter. | View on Amazon |
| FRAM Fits: 4.6L V8 | FE9837 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 4.6L V8 | R1522 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| K&N Fits: 4.6L V8 | PS2006 | 🇺🇸 US 🇨🇦 CA | Pro-Series without Wrench Off Nut | View on Amazon |
| PRO-TEC Fits: 4.6L V8 | PXL51522 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 4.6L V8 | PG5288 | 🇺🇸 US 🇨🇦 CA | 2.75" Diameter | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 4.6L V8 | UPF61R | 🇺🇸 US 🇨🇦 CA | Gold / Professional SpecialtyULTRAGUARD | View on Amazon |
| FRAM Fits: 4.6L V8 | XG9837 | 🇺🇸 US 🇨🇦 CA | Ultra SyntheticSpin-On | View on Amazon |
| FRAM Fits: 4.6L V8 | TG9837 | 🇺🇸 US 🇨🇦 CA | Tough GuardSpin-On | View on Amazon |
| MOBIL Fits: 4.6L V8 | M1206A | 🇺🇸 US 🇨🇦 CA | Extended PerformanceOutside Diameter: 2.97 (75mm) | View on Amazon |
| WIX Fits: 4.6L V8 | 51522XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 4.6L V8 | PF61E | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| BOSCH Popular Fits: 4.6L V8 | 3423 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: 4.6L V8 | 51522 | 🇺🇸 US 🇨🇦 CA | Factory filled synthetic oil | View on Amazon |
| CHAMP / LUBER-FINER Fits: 4.6L V8 | PH59XL | 🇺🇸 US 🇨🇦 CA | XL Synthetic | View on Amazon |
| DENSO Fits: 4.6L V8 | 1502008 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| FRAM Fits: 4.6L V8 | PH9837 | 🇺🇸 US 🇨🇦 CA | Extra GuardSpin-On | View on Amazon |
| HASTINGS / BALDWIN Fits: 4.6L V8 | LF487 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 4.6L V8 | OC1048 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| VARIOUS MFR Fits: 4.6L V8 | PG5288EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
20 Oil Filter parts for the 2011 Buick Lucerne come from 13 brands — FRAM, CHAMP / LUBER-FINER, VARIOUS MFR and 10 other brands. The "Popular" part is CHAMP / LUBER-FINER PH59.
The Economy section: 6 options from CHAMP / LUBER-FINER, FRAM, FVP and 3 other brands. CHAMP / LUBER-FINER PH59 is listed in this group.
The High Performance / Heavy Duty section lists 5 options from FRAM, ACDELCO, MOBIL and 1 other brand — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. ACDELCO UPF61R is listed in this group.
In the Standard Replacement grade, ACDELCO, BOSCH, WIX and 6 other brands supply 9 parts: built to original-equipment specification. A representative part number is ACDELCO PF61E.
Oil Filter Adapter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 24575062 | 🇺🇸 US 🇨🇦 CA | End 1 Outside Diameter (In): 0.73 InMaterial: Steel | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 19418234 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter adapters.
GM GENUINE supplies both parts for the 2011 Buick Lucerne.
Part numbers include GM GENUINE 24575062 and GM GENUINE 19418234.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 926494 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12573044 | 🇺🇸 US 🇨🇦 CA | Material: Rubber / Aluminum | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2011 Buick Lucerne, from DORMAN and GM GENUINE.
This group includes DORMAN 926494 and GM GENUINE 12573044.
Oil Filter Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 25014612 | 🇺🇸 US 🇨🇦 CA | without VAPOR SEPARATOROPENING PRESSURE 21 PSI NOMINAL | View on Amazon |
This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: GM GENUINE 25014612.
Oil Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 4.6L V8 | GS33431 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
This table covers the gaskets that seal the Oil Manifold. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2011 Buick Lucerne — MAHLE / CLEVITE GS33431.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 264127 | 🇺🇸 US 🇨🇦 CA | with Hole for Sensor | View on Amazon |
| SPECTRA PREMIUM Fits: 4.6L V8 | GMP71A | 🇺🇸 US 🇨🇦 CA | Gasket and/or Sealant Not Includedwithout Sensor Hole | View on Amazon |
| SPECTRA PREMIUM Fits: 4.6L V8 | GMP101A | 🇺🇸 US 🇨🇦 CA | Gasket and/or Sealant Not Includedwith Sensor Hole | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
3 Oil Pan parts are listed for the 2011 Buick Lucerne, from SPECTRA PREMIUM and DORMAN.
Listed part numbers: DORMAN 264127, SPECTRA PREMIUM GMP71A and SPECTRA PREMIUM GMP101A.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Popular Fits: 4.6L V8 | 703141410 | 🇺🇸 US 🇨🇦 CA | RTV Silicone | View on Amazon |
| APEX Fits: 4.6L V8 | AOP368 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 4.6L V8 | OS30704R | 🇺🇸 US 🇨🇦 CA | Permadry | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | OS32243 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 101022401 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts for the 2011 Buick Lucerne come from 4 brands — VICTOR REINZ, APEX, FEL-PRO and 1 other brand. The "Popular" part is VICTOR REINZ 703141410.
Part numbers include VICTOR REINZ 703141410, APEX AOP368 and FEL-PRO OS30704R, among others listed above.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | EPK116 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | EP188 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 4.6L V8 | M188 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
3 Oil Pump parts for the 2011 Buick Lucerne come from 2 brands — ENGINETECH and MELLING.
The Economy section: 1 option from ENGINETECH. ENGINETECH EPK116 is listed in this group.
Standard Replacement: 2 parts, from ENGINETECH and MELLING. A representative part number is ENGINETECH EP188.
Listed part numbers: ENGINETECH EPK116, ENGINETECH EP188 and MELLING M188.
Oil Pump Repair Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 4.6L V8 | K188 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 4.6L V8 | 22453585 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump repair kits.
2 Oil Pump Repair Kit parts are listed for the 2011 Buick Lucerne, from MELLING and SEALED POWER.
Part numbers include MELLING K188 and SEALED POWER 22453585.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Fits: 4.6L V8 | H1111CP | 🇺🇸 US 🇨🇦 CA | HypereutecticAlloy | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | H1111NCP | 🇺🇸 US 🇨🇦 CA | Hypereutecticwith 0.100In Dome Height | View on Amazon |
| SILV-O-LITE Fits: 4.6L V8 | 3497HC | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedFloating Pin Type | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | P5078 | 🇺🇸 US | Dome Top | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SILV-O-LITE Fits: 4.6L V8 | 3497HCK1 | 🇺🇸 US 🇨🇦 CA | Includes Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
5 Piston parts are listed for the 2011 Buick Lucerne, from SEALED POWER, SILV-O-LITE and ENGINETECH. ENGINETECH P5078 carries the "Popular" badge.
The Premium section lists 3 options from SEALED POWER and SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER H1111CP is listed in this group.
The Standard Replacement section: 1 option from ENGINETECH. ENGINETECH P5078 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Listed part numbers: ENGINETECH P5078, SEALED POWER H1111CP and SEALED POWER H1111NCP, plus the other parts above.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | S93158 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 42115CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 4.6L V8 | 2C5024 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
3 Piston Ring parts are listed for the 2011 Buick Lucerne, from ENGINETECH, MAHLE / CLEVITE and HASTINGS MANUFACTURING.
The Premium section: 2 options from ENGINETECH and MAHLE / CLEVITE. ENGINETECH S93158 is listed in this group.
The Standard Replacement section: 1 option from HASTINGS MANUFACTURING. HASTINGS MANUFACTURING 2C5024 is listed in this group.
This group includes ENGINETECH S93158, MAHLE / CLEVITE 42115CP and HASTINGS MANUFACTURING 2C5024.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12693909 | 🇺🇸 US 🇨🇦 CA | Optional with 24100294 | View on Amazon |
| MELLING Fits: 4.6L V8 | MR1340 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 4.6L V8 | 402917 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
3 Rocker Arm parts for the 2011 Buick Lucerne come from 3 brands — GM GENUINE, MELLING and QUALCAST.
Part numbers include GM GENUINE 12693909, MELLING MR1340 and QUALCAST 402917.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.6L V8 | 8MMSRH62 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | 8MMSRH126 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| CLOYES Fits: 4.6L V8 | 94187 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| CLOYES Fits: 4.6L V8 | 94186 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZC94186 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZC94187 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | C1562 | 🇺🇸 US 🇨🇦 CA | LowerPrimary Timing Chain | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | C15126 | 🇺🇸 US 🇨🇦 CA | UpperSecondary Timing Chain | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | RC1019 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | RC1020 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
10 Timing Chain parts are listed for the 2011 Buick Lucerne, from MELLING, CLOYES, INA and 2 other brands. MELLING 8MMSRH62 carries the "Popular" badge.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | TS21562 | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 76108S | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 3 Chains, 2 Dampers, 3 Guides, 3 Tensioners | View on Amazon |
| SKP Fits: 4.6L V8 | SK94186S | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 4.6L V8 | 94186SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (3), Timing Chain Tensioner Guide (2) | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | 38MMSRH62S | 🇺🇸 US 🇨🇦 CA | Does Not Include Sprockets | View on Amazon |
| INA Fits: 4.6L V8 | ZC94186SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 3 Chains, 3 Guides, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
6 Timing Chain & Component Kit parts for the 2011 Buick Lucerne come from 6 brands — PREFERRED COMPONENTS INC, S.A. GEAR, SKP and 3 other brands. The "Popular" part is CLOYES 94186SX.
The Economy section: 3 options from PREFERRED COMPONENTS INC, S.A. GEAR and SKP. PREFERRED COMPONENTS INC TS21562 is listed in this group.
Standard Replacement: 3 parts, from CLOYES, MELLING and INA. A representative part number is CLOYES 94186SX.
Part numbers include CLOYES 94186SX, PREFERRED COMPONENTS INC TS21562 and S.A. GEAR 76108S, among others listed above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.6L V8 | BG310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BG309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BD312 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BD311 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95309 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95310 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95311 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95312 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| INA Fits: 4.6L V8 | ZG95309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| INA Fits: 4.6L V8 | ZG95310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZG95312 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75311 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75312A | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7309 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7310 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7311 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 7312 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
19 Timing Chain Guide / Damper parts are listed for the 2011 Buick Lucerne, from MELLING, CLOYES, PREFERRED COMPONENTS INC and 2 other brands. MELLING BG310 carries the "Popular" badge.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 4.6L V8 | 12581223 | 🇺🇸 US 🇨🇦 CA | CenterPrimary | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BT314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BT313 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95313 | 🇺🇸 US 🇨🇦 CA | Left Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZT95313 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZT95314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65314 | 🇺🇸 US 🇨🇦 CA | LowerPrimary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65313 | 🇺🇸 US 🇨🇦 CA | Left UpperSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65313A | 🇺🇸 US 🇨🇦 CA | Right UpperSecondary | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 9313 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 9314 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
12 Timing Chain Tensioner parts for the 2011 Buick Lucerne come from 6 brands — PREFERRED COMPONENTS INC, MELLING, CLOYES and 3 other brands. The "Popular" part is GM GENUINE 12581223.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | 72673 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Popular Fits: 4.6L V8 | JV5065 | 🇺🇸 US 🇨🇦 CA | Contains Timing Cover Seal & Front Cover Gasket OnlySet | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12554519 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 4.6L V8 | T32453 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 72673 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 4.6L V8 | 711407300 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Timing Cover Gasket parts for the 2011 Buick Lucerne come from 5 brands — MAHLE / CLEVITE, FEL-PRO, GM GENUINE and 2 other brands. The "Popular" part is FEL-PRO 72673.
Part numbers include FEL-PRO 72673, MAHLE / CLEVITE JV5065 and GM GENUINE 12554519, among others listed above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 4.6L V8 | 20557A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS20557A | 🇺🇸 US 🇨🇦 CA | 2.622 Bore Diameter0.311 Width | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts for the 2011 Buick Lucerne come from 2 brands — SKF and WJB / INMOTION PARTS.
This group includes SKF 20557A and WJB / INMOTION PARTS WS20557A.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 4.6L V8 | S772T | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12577433 | 🇺🇸 US 🇨🇦 CA | Intermediate Gear | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | G55772 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Idler sprockets.
3 Timing Idler Sprocket parts are listed for the 2011 Buick Lucerne, from FVP, GM GENUINE and PREFERRED COMPONENTS INC.
Listed part numbers: FVP S772T, GM GENUINE 12577433 and PREFERRED COMPONENTS INC G55772.
Torque Strut Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 4.6L V8 | EM3140 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| SKP Fits: 4.6L V8 | SKM3140 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 4.6L V8 | 20760911 | 🇺🇸 US 🇨🇦 CA | Right Upper | View on Amazon |
| WESTAR Popular Fits: 4.6L V8 | EM3140 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ANCHOR Fits: 4.6L V8 | 3140 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5387 | 🇺🇸 US 🇨🇦 CA | RearSolid | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 4.6L V8 | 625387 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
7 Torque Strut Mount parts are listed for the 2011 Buick Lucerne, from FVP, SKP, GM GENUINE and 4 other brands. GM GENUINE 20760911 carries the "Popular" badge.
Economy: 2 parts, from FVP and SKP. A representative part number is FVP EM3140.
The Standard Replacement section: 4 options from GM GENUINE, WESTAR, ANCHOR and 1 other brand. GM GENUINE 20760911 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes GM GENUINE 20760911, FVP EM3140 and SKP SKM3140 and the remaining parts above.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12588111 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12588112 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the Valve covers.
GM GENUINE supplies both parts for the 2011 Buick Lucerne.
Listed part numbers: GM GENUINE 12588111 and GM GENUINE 12588112.
Valve Cover Bolt / Screw
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12557829 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.
One part is listed for the 2011 Buick Lucerne — GM GENUINE 12557829.
Valve Cover Bolt Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12557831 | 🇺🇸 US 🇨🇦 CA | Gray | View on Amazon |
This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2011 Buick Lucerne — GM GENUINE 12557831.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | VS50526R | 🇺🇸 US 🇨🇦 CA | Perma Dry Molded RubberIncludes Spark Plug Tube Seals and Valve Cover Grommets | View on Amazon |
| GM GENUINE Popular Fits: 4.6L V8 | 12581818 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| APEX Fits: 4.6L V8 | AVC369S | 🇺🇸 US 🇨🇦 CA | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12581816 | 🇺🇸 US 🇨🇦 CA | SPARK PLUG HOLES | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12581817 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | VS50331 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 151068901 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts for the 2011 Buick Lucerne come from 5 brands — GM GENUINE, FEL-PRO, APEX and 2 other brands. The "Popular" part is FEL-PRO VS50526R.
Part numbers include FEL-PRO VS50526R, GM GENUINE 12581818 and APEX AVC369S, among others listed above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | GD3056 | 🇺🇸 US | Iron | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | GD3057 | 🇺🇸 US | Iron | View on Amazon |
| SBI Fits: 4.6L V8 | 1403056 | 🇺🇸 US 🇨🇦 CA | Intake0.2350 I.D. | View on Amazon |
| SBI Fits: 4.6L V8 | 1403057 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2350 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
4 Valve Guide parts for the 2011 Buick Lucerne come from 2 brands — ENGINETECH and SBI.
Part numbers include ENGINETECH GD3056, ENGINETECH GD3057 and SBI 1403056, among others listed above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | L2319 | 🇺🇸 US | Hydraulic | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | JB7524 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| AJUSA Fits: 4.6L V8 | 85018700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | HL129 | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 367082 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster | View on Amazon |
| SBI Fits: 4.6L V8 | VL175 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | HT2307 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
7 Valve Lifter parts for the 2011 Buick Lucerne come from 7 brands — ENGINETECH, MELLING, AJUSA and 4 other brands. The "Popular" part is ENGINETECH L2319.
This group includes ENGINETECH L2319, MELLING JB7524 and AJUSA 85018700 and the remaining parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12565199 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 4.6L V8 | 1601634 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust1.656 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
2 Valve Spring parts are listed for the 2011 Buick Lucerne, from GM GENUINE and SBI.
Listed part numbers: GM GENUINE 12565199 and SBI 1601634.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 01647209 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 4.6L V8 | 3407209 | 🇺🇸 US 🇨🇦 CA | 1 Round Groove | View on Amazon |
| SBI Fits: 4.6L V8 | 1211081 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2870 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts are listed for the 2011 Buick Lucerne, from GM GENUINE, QUALCAST and SBI.
This group includes GM GENUINE 01647209, QUALCAST 3407209 and SBI 1211081.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | S420V | 🇺🇸 US | Viton | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | SS71043 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AVS3103 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | SS45930 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 3835445 | 🇺🇸 US 🇨🇦 CA | Viton Top Hat | View on Amazon |
| SBI Fits: 4.6L V8 | 1221349 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 121007801 | 🇺🇸 US 🇨🇦 CA | SetSealing Surface Type: Flanged | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Valve Stem Seal parts for the 2011 Buick Lucerne come from 7 brands — ENGINETECH, FEL-PRO, APEX and 4 other brands. The "Popular" part is ENGINETECH S420V.
Part numbers include ENGINETECH S420V, FEL-PRO SS71043 and APEX AVS3103, among others listed above.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SPECTRA PREMIUM Fits: 4.6L V8 | VTS1002 | 🇺🇸 US 🇨🇦 CA | Camshaft Valve | View on Amazon |
| SPECTRA PREMIUM Fits: 4.6L V8 | VTS1200 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| WALKER PRODUCTS Fits: 4.6L V8 | 5901289 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
3 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2011 Buick Lucerne come from 2 brands — SPECTRA PREMIUM and WALKER PRODUCTS.
Listed part numbers: SPECTRA PREMIUM VTS1002, SPECTRA PREMIUM VTS1200 and WALKER PRODUCTS 5901289.
Buying Engine Parts for a 2011 Buick Lucerne
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2011 Buick Lucerne?
Our catalog currently lists 296 engine parts for the 2011 Buick Lucerne across 63 subcategories and 59 brands, covering both the 3.9L V6 and the 4.6L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2011 Buick Lucerne engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2011 Buick Lucerne?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2011 Buick Lucerne?
Oil rows on this page include SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Buick Lucerne was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 Buick Lucerne?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 Buick Lucerne
Engine Parts for Other Buick Lucerne Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.