2006 Cadillac CTS Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 406 engine parts for the 2006 Cadillac CTS, across 78 part types, covering all 3 engine options (2.8L V6, 3.6L V6 and 6.0L V8). Every part shows its brand, manufacturer part number and fitment notes.

The engine on the 2006 Cadillac CTS covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Timing Chain Guide / Damper (34 parts), Oil (29 parts) and Oil Filter (29 parts). The other 75 part types cover the remaining 314 parts.

Camshaft Alignment Tool

Brand Part Number Markets Notes Buy
LISLE Fits: 2.8L V6 37530
🇺🇸 US 🇨🇦 CA
GM
Fitment notes — LISLE 37530
GM
With GM High Feature engine
View on
Amazon

This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes.

Camshaft Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12574477
🇺🇸 US 🇨🇦 CA
Camshaft Sprocket Seal
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12608427
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the connecting rods between each piston and the crankshaft.

Connecting Rod Bearing

High Performance

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 2.8L V6 CR6826XPX
🇺🇸 US 🇨🇦 CA
PmaxblackSet
Fitment notes — KING ENGINE BEARINGS CR6826XPX
PmaxblackSetwith Extra Oil Clearance
(Size: Standard)
View on
Amazon
KING ENGINE BEARINGS Fits: 2.8L V6 CR6826XP
🇺🇸 US 🇨🇦 CA
PmaxblackSet
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 BB133J
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.8L V6 CB1877A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Pair
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.8L V6 CB1877A6
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Set
View on
Amazon
GM GENUINE Fits: 2.8L V6 12636003
🇺🇸 US 🇨🇦 CA
Use with 2004-11
View on
Amazon
KING ENGINE BEARINGS Fits: 2.8L V6 CR6826SI
🇺🇸 US 🇨🇦 CA
BI-Metal (aluminum silicon base)Set
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 CB1879A6
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Set
Fitment notes — MAHLE / CLEVITE CB1879A6
A Series (Aluminum)Set
Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 CB1879A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Pair
Fitment notes — MAHLE / CLEVITE CB1879A
A Series (Aluminum)Pair
Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock (Size: 0.010" Undersize)
View on
Amazon
SEALED POWER Fits: 2.8L V6 5070A
🇺🇸 US 🇨🇦 CA
View on
Amazon
SEALED POWER Fits: 2.8L V6 65070A
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 11519680
🇺🇸 US 🇨🇦 CA
M9X1X53
View on
Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 GM217CSA
🇺🇸 US
View on
Amazon
FEL-PRO Popular Fits: 2.8L V6 CS263761
🇺🇸 US 🇨🇦 CA
Includes RTV Sealant
View on
Amazon
AJUSA Fits: 2.8L V6 54277700
🇺🇸 US 🇨🇦 CA
Engine # LP1
View on
Amazon
APEX Fits: 2.8L V6 ACS11064
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 CS54661
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 081008601
🇺🇸 US 🇨🇦 CA
Improved Design
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Popular Fits: 2.8L V6 MB4272SI
🇺🇸 US 🇨🇦 CA
BI-Metal (aluminum silicon base)Set
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.8L V6 MS2276A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Set
View on
Amazon
ENGINETECH Fits: 2.8L V6 BC130J
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
GM GENUINE Fits: 2.8L V6 12648786
🇺🇸 US 🇨🇦 CA
Contains ONE Upper and Lower
Fitment notes — GM GENUINE 12648786
Contains ONE Upper and Lower
Except Brazil (CV2)# 1,2,4 Standard
View on
Amazon
GM GENUINE Fits: 2.8L V6 12648787
🇺🇸 US 🇨🇦 CA
Except Brazil (CV2)# 3
Fitment notes — GM GENUINE 12648787
Except Brazil (CV2)# 3Standard# 3 Standard
View on
Amazon
SEALED POWER Fits: 2.8L V6 IROX7464MA
🇺🇸 US 🇨🇦 CA
A-Series aluminum bearingsIROX: Special Polymer Coating
Fitment notes — SEALED POWER IROX7464MA
A-Series aluminum bearingsIROX: Special Polymer CoatingSet
(Size: Standard)
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12560272
🇺🇸 US 🇨🇦 CA
SINGLE USEBOTTOM
Fitment notes — GM GENUINE 12560272
SINGLE USEBOTTOMLONGM10X2X102.5
View on
Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Fits: 2.8L V6 NS99166
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
NATIONAL Fits: 2.8L V6 99166
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
SCHAEFFLER Fits: 2.8L V6 SS3489
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 2.8L V6 WS99166
🇺🇸 US 🇨🇦 CA
Shaft Diameter Minimum (In): 1.647 In
Fitment notes — WJB / INMOTION PARTS WS99166
Shaft Diameter Minimum (In): 1.647 In
Front
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.8L V6 BS40711
🇺🇸 US 🇨🇦 CA
PTFE Rubber Seal
Fitment notes — FEL-PRO BS40711
PTFE Rubber Seal
Rear1 PieceRetainer with Seal
View on
Amazon
GM GENUINE Popular Fits: 2.8L V6 12608750
🇺🇸 US 🇨🇦 CA
Material: Steel Fluoro ElastomerSeal Type: Spring Loaded Multi Lip
Fitment notes — GM GENUINE 12608750
Material: Steel Fluoro ElastomerSeal Type: Spring Loaded Multi LipFront
View on
Amazon
NATIONAL Popular Fits: 2.8L V6 710674
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
APEX Fits: 2.8L V6 ABS1164
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
GM GENUINE Fits: 2.8L V6 12637710
🇺🇸 US 🇨🇦 CA
Seal Type: Spring Loaded Multi LipIncludes Seal
Fitment notes — GM GENUINE 12637710
Seal Type: Spring Loaded Multi LipIncludes SealRear
View on
Amazon
NATIONAL Fits: 2.8L V6 710855
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
SKF Fits: 2.8L V6 38085
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
TIMKEN Fits: 2.8L V6 SL260014
🇺🇸 US 🇨🇦 CA
1.969 in. Shaft Size2.752 in. Bore
Fitment notes — TIMKEN SL260014
1.969 in. Shaft Size2.752 in. Bore2.756 in. Outer Diam0.433 in. WidthFront
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 191001101
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — VICTOR REINZ 191001101
Set
Rear
View on
Amazon
WJB / INMOTION PARTS Fits: 2.8L V6 WS710674
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 2.8L V6 WS710855
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12570326
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 HB258
🇺🇸 US
Set
View on
Amazon
FEL-PRO Popular Fits: 2.8L V6 ES722741
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.8L V6 GS33676
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33676
Cylinder Head Bolt KitSetSteel
View on
Amazon
APEX Fits: 2.8L V6 AHB1164
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
FEL-PRO Fits: 2.8L V6 ES72274
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
GM GENUINE Fits: 2.8L V6 19352499
🇺🇸 US 🇨🇦 CA
Fits 5 speed Automatic trans.SINGLE USE
Fitment notes — GM GENUINE 19352499
Fits:
5 speed Automatic trans.SINGLE USEM11X2X152
or:
6 speed Manual trans.SINGLE USEM11X2X152
View on
Amazon
SKP Fits: 2.8L V6 SKES72274
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP Fits: 2.8L V6 SKAHB389
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 141009701
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — VICTOR REINZ 141009701
Set
RightOld Design
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 143229301
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — VICTOR REINZ 143229301
Set
Right
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 141013901
🇺🇸 US 🇨🇦 CA
SetImproved Design
Fitment notes — VICTOR REINZ 141013901
SetImproved DesignLeft
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
APEX Popular Fits: 2.8L V6 AHG1317R
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
APEX Popular Fits: 2.8L V6 AHG1317L
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
AJUSA Fits: 2.8L V6 10179800
🇺🇸 US 🇨🇦 CA
Multi Layered Steel
Fitment notes — AJUSA 10179800
Multi Layered Steel
Right90 Bore DiameterEngine # LP1
View on
Amazon
AJUSA Fits: 2.8L V6 10175400
🇺🇸 US 🇨🇦 CA
Multi Layered Steel
Fitment notes — AJUSA 10175400
Multi Layered Steel
Left90 Bore DiameterEngine # LP1
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 54668
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54668
Multi-Layered Steel
Left
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 54667
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 54667
Multi-Layered Steel
Right
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 613722000
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 613722500
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 GM171HSA
🇺🇸 US 🇨🇦 CA
with MLS head gaskets
View on
Amazon
ULTRA-POWER Popular Fits: 2.8L V6 HS54668
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
View on
Amazon
AJUSA Fits: 2.8L V6 52609900
🇺🇸 US 🇨🇦 CA
Complete Set
Fitment notes — AJUSA 52609900
Complete Set
Engine # LP1
View on
Amazon
APEX Fits: 2.8L V6 AHS11074
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 2.8L V6 GM171HSAWB
🇺🇸 US 🇨🇦 CA
Includes Head Boltswith MLS head gaskets
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 HS54668
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Block Heater

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12587380
🇺🇸 US 🇨🇦 CA
Use with 2 Pin HeaterEngine Block Heater (K05)
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Cover

Brand Part Number Markets Notes Buy
TECHPRO Fits: 2.8L V6 GM1228140
🇺🇸 US 🇨🇦 CA
Lowerwithout Styrofoam
View on
Amazon

This table covers the Engine covers.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.8L V6 50550600
🇺🇸 US 🇨🇦 CA
Engine # LP1
View on
Amazon
ENGINETECH Fits: 2.8L V6 GM171K1
🇺🇸 US 🇨🇦 CA
with MLS head gaskets
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 V4431
🇺🇸 US 🇨🇦 CA
Engine VIN Code 7,V.2343 stem
Fitment notes — ENGINETECH V4431
Engine VIN Code 7,V.2343 stem1.205" Head44.25 DegreeSeat Angle
View on
Amazon
GM GENUINE Fits: 2.8L V6 12575354
🇺🇸 US 🇨🇦 CA
Standard
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 2114700
🇺🇸 US 🇨🇦 CA
View on
Amazon
QUALCAST Fits: 2.8L V6 1013335
🇺🇸 US 🇨🇦 CA
1.205 Head Dia. 0.2344 Stem. Nitrided
View on
Amazon
SBI Fits: 2.8L V6 13082
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Harmonic Balancer

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.8L V6 594452
🇺🇸 US 🇨🇦 CA
with Dual Serpentine Beltswith Keyway
View on
Amazon
GM GENUINE Fits: 2.8L V6 12597654
🇺🇸 US 🇨🇦 CA
DUAL BELT without KEYWAY
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.8L V6 595005
🇺🇸 US 🇨🇦 CA
M14 X 1.50 X 48.4 mm
View on
Amazon
GM GENUINE Fits: 2.8L V6 11549124
🇺🇸 US 🇨🇦 CA
M14X1.5X48.4
View on
Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12705324
🇺🇸 US 🇨🇦 CA
LowerNEW
View on
Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Intake Manifold Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 11588733
🇺🇸 US 🇨🇦 CA
M8X1.25X80
View on
Amazon

This table covers the Intake Manifold bolts.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.8L V6 MS96969
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO MS96969
Set
Lower and Upper
View on
Amazon
APEX Fits: 2.8L V6 AMS11644
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — APEX AMS11644
Set
Lower and Upper
View on
Amazon
GM GENUINE Fits: 2.8L V6 12598158
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 MS19605
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE MS19605
SetMolded RubberIncludes Plenum Gasket
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 111033101
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Plenum Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.8L V6 MS96976
🇺🇸 US 🇨🇦 CA
Upper
View on
Amazon
ULTRA-POWER Popular Fits: 2.8L V6 MS96976
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — ULTRA-POWER MS96976
Set
Upper
View on
Amazon
APEX Fits: 2.8L V6 AMS11643
🇺🇸 US 🇨🇦 CA
Upper
View on
Amazon
GM GENUINE Fits: 2.8L V6 12595277
🇺🇸 US 🇨🇦 CA
SetContains 2
Fitment notes — GM GENUINE 12595277
SetContains 2
Upper
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 MS19754
🇺🇸 US 🇨🇦 CA
Plenum Gasket SetFuel Injection
Fitment notes — MAHLE / CLEVITE MS19754
Plenum Gasket SetFuel InjectionMolded Rubber
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 151031101
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12620501
🇺🇸 US 🇨🇦 CA
Standard
View on
Amazon
MELLING Popular Fits: 2.8L V6 V3211
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 2.8L V6 V4490
🇺🇸 US 🇨🇦 CA
.2348 stem1.386 Head
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 2114598
🇺🇸 US 🇨🇦 CA
39.40mm Head Diameter7.94mm Stem Diameter
Fitment notes — MAHLE / CLEVITE 2114598
39.40mm Head Diameter7.94mm Stem Diameter3 Lock Groove Valve
View on
Amazon
QUALCAST Fits: 2.8L V6 1013211
🇺🇸 US 🇨🇦 CA
1.384 Head Dia. 0.2348 Stem
View on
Amazon
SBI Fits: 2.8L V6 13211
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Economy

Brand Part Number Markets Notes Buy
SKP Popular Fits: 2.8L V6 SKM3149
🇺🇸 US 🇨🇦 CA
Fits Front Rightwithout Heat Shield
Fitment notes — SKP SKM3149
Fits:
Front Rightwithout Heat Shield
or:
Front LeftReuse OE Heat Shield
or:
Front RightReuse OE Heat Shield
or:
Front Leftwithout Heat Shield
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 2.8L V6 3149
🇺🇸 US 🇨🇦 CA
Fits Front LeftReuse OE Heat Shield
Fitment notes — ANCHOR 3149
Fits:
Front LeftReuse OE Heat ShieldHydraulic
or:
Front RightReuse OE Heat ShieldHydraulic
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 2.8L V6 A5722
🇺🇸 US 🇨🇦 CA
Fits Front Right
Fitment notes — DEA / MARMON RIDE CONTROL A5722
Fits:
Front Right
or:
Front Left
View on
Amazon
PIONEER Fits: 2.8L V6 615455
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
PIONEER Fits: 2.8L V6 615722
🇺🇸 US 🇨🇦 CA
Fits Front Right
Fitment notes — PIONEER 615722
Fits:
Front Right
or:
Front Left
View on
Amazon
WESTAR Fits: 2.8L V6 EM3149
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Kit

Brand Part Number Markets Notes Buy
ANCHOR Fits: 2.8L V6 300509
🇺🇸 US 🇨🇦 CA
Automatic trans.
View on
Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.

Full Synthetic

Brand Part Number Markets Notes Buy
LIQUI MOLY Popular Fits: 2.8L V6 20228
🇺🇸 US 🇨🇦 CA
Molygen New Generation 5W-305 Liter
View on
Amazon
MOBIL Popular Fits: 2.8L V6 125195
🇺🇸 US 🇨🇦 CA
Full Synthetic 5W-30Mobil Full Synthetic
Fitment notes — MOBIL 125195
Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Popular Fits: 2.8L V6 124315
🇺🇸 US 🇨🇦 CA
5W-30Mobil 1 Advanced
Fitment notes — MOBIL 124315
5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart
View on
Amazon
VALVOLINE Popular Fits: 2.8L V6 VV955
🇺🇸 US 🇨🇦 CA
Advanced Protection Full Synthetic SAE 5W-301 Quart
View on
Amazon
IDEMITSU Fits: 2.8L V6 30015204750
🇺🇸 US
IFG3 5W-30 SP/Motor Oil1 Quart
View on
Amazon
IDEMITSU Fits: 2.8L V6 30013015750
🇺🇸 US
Full Synthetic 5W-30 GF-6/SP1 Quart
View on
Amazon
IDEMITSU Fits: 2.8L V6 30013015953
🇺🇸 US
Full Synthetic 5W-30 GF-6/SP5 Quart
View on
Amazon
LIQUI MOLY Fits: 2.8L V6 20136
🇺🇸 US 🇨🇦 CA
Special Tec AA 5W-301 Liter
View on
Amazon
LIQUI MOLY Fits: 2.8L V6 20226
🇺🇸 US 🇨🇦 CA
Molygen New Generation 5W-301 Liter
View on
Amazon
LIQUI MOLY Fits: 2.8L V6 20138
🇺🇸 US 🇨🇦 CA
Special Tec AA 5W-305 Liter
View on
Amazon
LUCAS OIL Fits: 2.8L V6 10049
🇺🇸 US 🇨🇦 CA
FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt
View on
Amazon
LUCAS OIL Fits: 2.8L V6 18005
🇺🇸 US 🇨🇦 CA
Full Synthetic Motor Oil SAE 5W-306 Gallon
View on
Amazon
MOBIL Fits: 2.8L V6 112627
🇺🇸 US 🇨🇦 CA
Extended Performance 5W-30Mobil 1 Extended Performance
Fitment notes — MOBIL 112627
Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart
View on
Amazon
PENTOSIN Fits: 2.8L V6 8044214
🇺🇸 US 🇨🇦 CA
5W-30-Pentospeed-DEXOS1 GEN31 Liter
Fitment notes — PENTOSIN 8044214
5W-30-Pentospeed-DEXOS1 GEN31 Liter
For Temperature Above -20 F
View on
Amazon
PENTOSIN Fits: 2.8L V6 8044216
🇺🇸 US 🇨🇦 CA
5W-30-Pentospeed-DEXOS1 GEN35 Liters
Fitment notes — PENTOSIN 8044216
5W-30-Pentospeed-DEXOS1 GEN35 Liters
For Temperature Above -20 F
View on
Amazon
VALVOLINE Fits: 2.8L V6 891678
🇺🇸 US 🇨🇦 CA
Extended Protection Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 904564
🇺🇸 US 🇨🇦 CA
Restore & Protect Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 891670
🇺🇸 US 🇨🇦 CA
Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 904566
🇺🇸 US 🇨🇦 CA
Restore & Protect Full Synthetic SAE 5W-305 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 881164
🇺🇸 US 🇨🇦 CA
Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart
View on
Amazon

High Mileage (>75,000 Miles)

Brand Part Number Markets Notes Buy
VALVOLINE Popular Fits: 2.8L V6 VV1556
🇺🇸 US 🇨🇦 CA
Max Life High Mileage Synthetic Blend SAE 5W-301 Quart
View on
Amazon
MOBIL Fits: 2.8L V6 123842
🇺🇸 US 🇨🇦 CA
Extended Performance High Mileage 5W-30Synthetic
Fitment notes — MOBIL 123842
Extended Performance High Mileage 5W-30Synthetic1 Quart
View on
Amazon
MOBIL Fits: 2.8L V6 103767
🇺🇸 US 🇨🇦 CA
High Mileage 5W-30Mobil 1 High Mileage
Fitment notes — MOBIL 103767
High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 VV179
🇺🇸 US 🇨🇦 CA
Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 881163
🇺🇸 US 🇨🇦 CA
Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 881169
🇺🇸 US 🇨🇦 CA
Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 2.8L V6 109290
🇺🇸 US
Synthetic BlendAPI SP Specifications
Fitment notes — ACDELCO 109290
Synthetic BlendAPI SP SpecificationsSAE 5W-305 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 797975
🇺🇸 US 🇨🇦 CA
Daily Protection SAE 5W-30 Synthetic Blend1 Quart
View on
Amazon
VALVOLINE Fits: 2.8L V6 881159
🇺🇸 US 🇨🇦 CA
Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.8L V6 921036
🇺🇸 US 🇨🇦 CA
Dipstick Only
View on
Amazon
GM GENUINE Fits: 2.8L V6 12595327
🇺🇸 US 🇨🇦 CA
Dipstick Only
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Dipstick / Tube Seal

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 2.8L V6 73889
🇺🇸 US 🇨🇦 CA
View on
Amazon
GM GENUINE Fits: 2.8L V6 24504031
🇺🇸 US 🇨🇦 CA
Fits Single UseIndicator
Fitment notes — GM GENUINE 24504031
Fits:
Single UseIndicator6.07 ID1.78 Diameteror TubeSingle Use6.07 ID1.78 Diameter
View on
Amazon

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 2.8L V6 090034
🇺🇸 US 🇨🇦 CA
M12 x 1.75 Thread
Fitment notes — DORMAN 090034
M12 x 1.75 Thread
1.06" Length
View on
Amazon
GM GENUINE Popular Fits: 2.8L V6 11562588
🇺🇸 US 🇨🇦 CA
with SealExc. Magnet
Fitment notes — GM GENUINE 11562588
with SealExc. Magnetwith Hex HeadM12X1.75X25
View on
Amazon
AGS Fits: 2.8L V6 ODP00009
🇺🇸 US 🇨🇦 CA
M12x1.75
View on
Amazon
DORMAN Fits: 2.8L V6 090156
🇺🇸 US 🇨🇦 CA
M12 x 1.75 Thread
View on
Amazon
DORMAN Fits: 2.8L V6 092018
🇺🇸 US 🇨🇦 CA
Thread Size: M12-1.75Twist Style
View on
Amazon
VAICO Fits: 2.8L V6 V400755
🇺🇸 US 🇨🇦 CA
Thread Size: M 12 X 1,75Includes Gasket
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.8L V6 21012700
🇺🇸 US 🇨🇦 CA
Engine # LP1
View on
Amazon
GM GENUINE Fits: 2.8L V6 12616850
🇺🇸 US 🇨🇦 CA
Diameter 19.39
View on
Amazon
VAICO Fits: 2.8L V6 V401110
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Insert

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 11503302
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Drain Plug inserts.

Oil Filler Cap

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.8L V6 90202
🇺🇸 US 🇨🇦 CA
View on
Amazon
GATES Fits: 2.8L V6 31103
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTORAD Fits: 2.8L V6 MO152
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filler Cap Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 2.8L V6 73193
🇺🇸 US 🇨🇦 CA
Services OEM bonded Cap sealAftermarket Design
Fitment notes — FEL-PRO 73193
Services OEM bonded Cap sealAftermarket Design28 (mm) Inside DiameterSeal
View on
Amazon
GM GENUINE Fits: 2.8L V6 24100002
🇺🇸 US 🇨🇦 CA
Size # 32027.94MM Inner Diameter
View on
Amazon

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
CHAMP / LUBER-FINER Popular Fits: 2.8L V6 P2129
🇺🇸 US 🇨🇦 CA
Anti-Drain Back Valve: No
View on
Amazon
PRO-TEC Popular Fits: 2.8L V6 PXL57090
🇺🇸 US 🇨🇦 CA
View on
Amazon
BOSCH Fits: 2.8L V6 72247WS
🇺🇸 US 🇨🇦 CA
Workshop Oil Filter
View on
Amazon
CHAMP / LUBER-FINER Fits: 2.8L V6 CF5274
🇺🇸 US 🇨🇦 CA
View on
Amazon
FAMOUS BRAND Fits: 2.8L V6 R84090
🇺🇸 US 🇨🇦 CA
View on
Amazon
FAMOUS BRAND Fits: 2.8L V6 84090
🇺🇸 US 🇨🇦 CA
View on
Amazon
FRAM Fits: 2.8L V6 FF8765
🇺🇸 US 🇨🇦 CA
Force
Fitment notes — FRAM FF8765
Force
Cartridge Filter
View on
Amazon
FVP Fits: 2.8L V6 G7090
🇺🇸 US 🇨🇦 CA
View on
Amazon
PUROLATOR Fits: 2.8L V6 L25274
🇺🇸 US 🇨🇦 CA
Class: C
Fitment notes — PUROLATOR L25274
Class: C
Synthetic Oil Application. Premium filter recommendedTo Service Cadillac, GMC Applications
View on
Amazon
PUROLATOR Fits: 2.8L V6 PPL25274
🇺🇸 US 🇨🇦 CA
View on
Amazon
PUROLATOR Fits: 2.8L V6 V5274
🇺🇸 US 🇨🇦 CA
View on
Amazon
PUROLATOR Fits: 2.8L V6 PL25274
🇺🇸 US 🇨🇦 CA
To Service Cadillac, GMC ApplicationsSynthetic Oil Application, Premium Filter Recommended
View on
Amazon
ULTRA-POWER Fits: 2.8L V6 84090
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 2.8L V6 57090
🇺🇸 US 🇨🇦 CA
OE# 19355319~
View on
Amazon
VARIOUS MFR Fits: 2.8L V6 PG5274
🇺🇸 US 🇨🇦 CA
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Popular Fits: 2.8L V6 57090XP
🇺🇸 US 🇨🇦 CA
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX 57090XP
XP Extreme DutyBest for Synthetic Motor Oils
Factory filled synthetic oil
View on
Amazon
FRAM Fits: 2.8L V6 TG8765
🇺🇸 US 🇨🇦 CA
Tough GuardCartridge Filter
View on
Amazon
MOBIL Fits: 2.8L V6 M1C254A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 2.8L V6 PF2129
🇺🇸 US 🇨🇦 CA
Gold / ProfessionalCartridge
View on
Amazon
DENSO Popular Fits: 2.8L V6 1503064
🇺🇸 US 🇨🇦 CA
Engine Oil Filter or FTF Engine Oil Filter
View on
Amazon
WIX Popular Fits: 2.8L V6 57090
🇺🇸 US 🇨🇦 CA
Factory filled synthetic oil
View on
Amazon
ACDELCO Fits: 2.8L V6 PF2129GB
🇺🇸 US 🇨🇦 CA
Silver
View on
Amazon
CHAMP / LUBER-FINER Fits: 2.8L V6 P2129XL
🇺🇸 US 🇨🇦 CA
XL Synthetic
View on
Amazon
FEL-PRO Fits: 2.8L V6 OFCS1015
🇺🇸 US 🇨🇦 CA
Includes Cap and Filter
View on
Amazon
FVP Fits: 2.8L V6 G7090XL
🇺🇸 US 🇨🇦 CA
Extended Life
View on
Amazon
HASTINGS / BALDWIN Fits: 2.8L V6 LF489
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 OX399D
🇺🇸 US 🇨🇦 CA
Cartridge97.30mm Height
View on
Amazon
MANN Fits: 2.8L V6 HU693X
🇺🇸 US 🇨🇦 CA
Includes Gasket / Seal(s)
Fitment notes — MANN HU693X
Includes Gasket / Seal(s)
Supplied aftermarket version GM O-ring # 12577653 only fits 2004 and later Cadillac, Chevrolet, GMC engines. Synthetic Oil Application. Premium Filter Recommended.
View on
Amazon
VARIOUS MFR Fits: 2.8L V6 PG5274EX
🇺🇸 US 🇨🇦 CA
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12744666
🇺🇸 US 🇨🇦 CA
INCLUDES FILTER 19355319USED ON CARTRIDGE FILTERS
View on
Amazon

This table covers the Oil Filter adapters.

Oil Filter Adapter Gasket / O-Ring

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 2.8L V6 72968
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 B32224
🇺🇸 US 🇨🇦 CA
Oil Filter Adapter GasketSteel
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 711460600
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Bypass Valve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 25014612
🇺🇸 US 🇨🇦 CA
without VAPOR SEPARATOROPENING PRESSURE 21 PSI NOMINAL
Fitment notes — GM GENUINE 25014612
without VAPOR SEPARATOROPENING PRESSURE 21 PSI NOMINALPART HAS A 16.10MM MAX OD AND FITS A 15.84 HOLE IN BLOCK
View on
Amazon

This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Filter Cover

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.8L V6 917046
🇺🇸 US 🇨🇦 CA
View on
Amazon
GM GENUINE Fits: 2.8L V6 12583470
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTORAD Fits: 2.8L V6 MO336
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Filter covers.

Oil Filter Cover O-Ring

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12577653
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Filter Cover O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Gasket

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12687466
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Galley Plug

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12667039
🇺🇸 US 🇨🇦 CA
Engine BlockPLUG-CUP,9.9OD,1008/1010STEEL
View on
Amazon

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Level Sensor

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 2133945
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 2.8L V6 FLS83
🇺🇸 US 🇨🇦 CA
View on
Amazon
WELLS Fits: 2.8L V6 5S3016
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Oil Pan

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.8L V6 264258
🇺🇸 US 🇨🇦 CA
View on
Amazon
SPECTRA PREMIUM Fits: 2.8L V6 GMP74A
🇺🇸 US 🇨🇦 CA
GASKET AND/OR SEALANT NOT INCLUDED
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ Fits: 2.8L V6 703141410
🇺🇸 US 🇨🇦 CA
RTV Silicone
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Gasket Rivet

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12558759
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Pan Gasket rivets.

Oil Pump

Economy

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.8L V6 EPK160
🇺🇸 US 🇨🇦 CA
'Pressure King' Value Line Pump
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12640448
🇺🇸 US 🇨🇦 CA
Includes Bolts
Fitment notes — GM GENUINE 12640448
Includes Bolts
Retainers and Guide
View on
Amazon
MELLING Popular Fits: 2.8L V6 M353
🇺🇸 US 🇨🇦 CA
Does Not Include Oil Pickup Tube Assembly
View on
Amazon
ENGINETECH Fits: 2.8L V6 EP353
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.8L V6 0571630
🇺🇸 US 🇨🇦 CA
View on
Amazon
SEALED POWER Fits: 2.8L V6 22443667
🇺🇸 US 🇨🇦 CA
Does Not Include Oil Pickup Tube Assembly
View on
Amazon
Brand Part Number Markets Notes Buy
AUTOTECNICA Fits: 2.8L V6 GM1423406
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Pickup Tube / Screen

Brand Part Number Markets Notes Buy
MELLING Fits: 2.8L V6 370S
🇺🇸 US 🇨🇦 CA
View on
Amazon
SEALED POWER Fits: 2.8L V6 22415085
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the pickup tubes and screens that feed the oil pump.

Oil Pump Pickup Tube O-Ring

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12691257
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Temperature Sender

Brand Part Number Markets Notes Buy
WELLS Fits: 2.8L V6 5S3016
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Temperature senders.

Piston Pin Retainer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12569638
🇺🇸 US 🇨🇦 CA
Used with Federal Mogul Pistons
View on
Amazon
GM GENUINE Fits: 2.8L V6 12566186
🇺🇸 US 🇨🇦 CA
SINGLE USEExc. Brazil (CV2)
View on
Amazon

This table covers the Piston Pin retainers.

Piston Ring

Premium

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 S89246
🇺🇸 US 🇨🇦 CA
Steel Top PremiumSet
Fitment notes — ENGINETECH S89246
Steel Top PremiumSetMoly Coated
1.2mm / 1.5mm / 2.5mm
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 42106CP
🇺🇸 US 🇨🇦 CA
PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE 42106CP
PremiumMaterial Carbon Steel / Cast Iron / Stainless SteelSetAxial Height: 1.2mm / 1.5mm / 2.8mmChrome Facing
Shallow Groove (Size: Standard)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12596025
🇺🇸 US 🇨🇦 CA
View on
Amazon
HASTINGS MANUFACTURING Fits: 2.8L V6 2C4701
🇺🇸 US 🇨🇦 CA
Full SetTop Ring Surface Treatment: Chrome
Fitment notes — HASTINGS MANUFACTURING 2C4701
Full SetTop Ring Surface Treatment: Chromefor 2 Ring Piston
View on
Amazon
HASTINGS MANUFACTURING Fits: 2.8L V6 2C4701S
🇺🇸 US 🇨🇦 CA
Chrome Top Ring1 Cylinder Set
Fitment notes — HASTINGS MANUFACTURING 2C4701S
Chrome Top Ring1 Cylinder SetFor 2 Ring Piston
Top Ring Surface Treatment: Chrome
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Rocker Arm

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 24100294
🇺🇸 US 🇨🇦 CA
Optional with 12693909
View on
Amazon
MELLING Popular Fits: 2.8L V6 MR1323
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 2.8L V6 ER2944
🇺🇸 US
Roller cam follower
View on
Amazon
QUALCAST Fits: 2.8L V6 403901
🇺🇸 US 🇨🇦 CA
View on
Amazon
SBI Fits: 2.8L V6 1801323
🇺🇸 US 🇨🇦 CA
Intake and ExhaustRoller cam follower
View on
Amazon
SKP Fits: 2.8L V6 SKMR1323
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Timing Cam Sprocket

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12597414
🇺🇸 US 🇨🇦 CA
RightIDLER
View on
Amazon
GM GENUINE Fits: 2.8L V6 12597413
🇺🇸 US 🇨🇦 CA
LeftIDLER
View on
Amazon

This table covers the Timing Cam sprockets.

Timing Chain

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12589011
🇺🇸 US 🇨🇦 CA
CenterSECONDARY
Fitment notes — GM GENUINE 12589011
CenterSECONDARY92 PITCH
View on
Amazon
MELLING Popular Fits: 2.8L V6 1044
🇺🇸 US 🇨🇦 CA
Upperwith Roller Secondary Timing Chain
Fitment notes — MELLING 1044
Upperwith Roller Secondary Timing Chain1st Design
View on
Amazon
MELLING Popular Fits: 2.8L V6 1007
🇺🇸 US 🇨🇦 CA
LowerPrimary Timing Chain
Fitment notes — MELLING 1007
LowerPrimary Timing ChainUse with Crankshaft Sprocket Stamped 12590921
View on
Amazon
CLOYES Fits: 2.8L V6 C981
🇺🇸 US 🇨🇦 CA
Lower
View on
Amazon
CLOYES Fits: 2.8L V6 94209
🇺🇸 US 🇨🇦 CA
Upper
View on
Amazon
GM GENUINE Fits: 2.8L V6 12597307
🇺🇸 US 🇨🇦 CA
CenterPRIMARY-WHEN REPLACING THIS CHAIN, YOU MUST REPLACE THE GEARS
Fitment notes — GM GENUINE 12597307
CenterPRIMARY-WHEN REPLACING THIS CHAIN, YOU MUST REPLACE THE GEARSPRIMARY
View on
Amazon
INA Fits: 2.8L V6 ZC02691
🇺🇸 US 🇨🇦 CA
PRIMARY
View on
Amazon
INA Fits: 2.8L V6 ZC0189
🇺🇸 US 🇨🇦 CA
Secondary
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 C1393
🇺🇸 US 🇨🇦 CA
UpperSecondary Roller Timing Chain
Fitment notes — PREFERRED COMPONENTS INC C1393
UpperSecondary Roller Timing ChainFor Intake Cam Stamped 12590682
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 C1003
🇺🇸 US 🇨🇦 CA
LowerPrimary Timing Chain
Fitment notes — PREFERRED COMPONENTS INC C1003
LowerPrimary Timing ChainUse with Crankshaft Sprocket Stamped 12590921
View on
Amazon
S.A. GEAR Fits: 2.8L V6 RC1044
🇺🇸 US 🇨🇦 CA
Secondary
View on
Amazon
S.A. GEAR Fits: 2.8L V6 C1007
🇺🇸 US 🇨🇦 CA
PRIMARY
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Economy

Brand Part Number Markets Notes Buy
S.A. GEAR Popular Fits: 2.8L V6 76159
🇺🇸 US 🇨🇦 CA
Does Not Include Camshaft SprocketIncludes 3 Chains, Crank Sprocket, 4 Guides, 2 Idler Sprockets, 2 Tensioner Arms, 3 Tensioners
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 TS21003
🇺🇸 US 🇨🇦 CA
Sprockets Not Included
Fitment notes — PREFERRED COMPONENTS INC TS21003
Sprockets Not Included
78 Link Silent Primary Chain with 92 Link Roller Secondary Chains
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 TS11003
🇺🇸 US 🇨🇦 CA
78 Link Silent Primary Chain with 92 Link Roller Secondary Chains
View on
Amazon
S.A. GEAR Fits: 2.8L V6 76159S
🇺🇸 US 🇨🇦 CA
Does Not Include SprocketsIncludes 3 Chains, 4 Guides, 2 Tensioner Arms, 3 Tensioners
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 2.8L V6 31007S
🇺🇸 US 🇨🇦 CA
Includes New Tensioner Mounting Bolts and Gaskets39 link Primary
Fitment notes — MELLING 31007S
Includes New Tensioner Mounting Bolts and Gaskets39 link Primary46 link Secondary
1st Design with Roller Secondary Timing Chain
View on
Amazon
CLOYES Fits: 2.8L V6 90981SA
🇺🇸 US 🇨🇦 CA
Includes: Timing Chain (3), Chain Guide (3), Tensioner Guide (2), Chain Tensioner (3), Crankshaft Sprocket, Idler Sprocket (2)
View on
Amazon
ENGINETECH Fits: 2.8L V6 TS112
🇺🇸 US 🇨🇦 CA
Does Not Include Sprockets
Fitment notes — ENGINETECH TS112
Does Not Include Sprockets
for Engines with Silent Type Lower Chain and Roller Upper Chain
View on
Amazon
INA Fits: 2.8L V6 ZC76159S
🇺🇸 US 🇨🇦 CA
Kit Contains 3 Chains, 4 Guides, 2 Tensioner Guides, 3 TensionersDoes Not Include Cam Sprocket
Fitment notes — INA ZC76159S
Kit Contains 3 Chains, 4 Guides, 2 Tensioner Guides, 3 TensionersDoes Not Include Cam SprocketDoes Not Include Crank Sprocket
View on
Amazon
INA Fits: 2.8L V6 ZC76159
🇺🇸 US 🇨🇦 CA
Kit Contains 3 Chains, 1 Crank Sprocket, 2 Deflector Sprocket, 3 Gaskets, 4 Guides, 2 Tensioner Guides, 3 TensionersDoes Not Include Cam Sprocket
Fitment notes — INA ZC76159
Kit Contains 3 Chains, 1 Crank Sprocket, 2 Deflector Sprocket, 3 Gaskets, 4 Guides, 2 Tensioner Guides, 3 TensionersDoes Not Include Cam Sprocket
with 78 Link Chain
View on
Amazon
INA Fits: 2.8L V6 ZC00521K
🇺🇸 US 🇨🇦 CA
Kit Contains 3 Chains, 1 Crank Sprocket, 2 Deflector Sprocket, 4 Guides, 2 Tensioner Guides, 3 Tensioners, Chain Protect AdditiveDoes Not Include Cam Sprocket
Fitment notes — INA ZC00521K
Kit Contains 3 Chains, 1 Crank Sprocket, 2 Deflector Sprocket, 4 Guides, 2 Tensioner Guides, 3 Tensioners, Chain Protect AdditiveDoes Not Include Cam Sprocket
with 92 Link Chain
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Guide / Damper

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12623514
🇺🇸 US 🇨🇦 CA
RightPIVOT ARM
View on
Amazon
GM GENUINE Popular Fits: 2.8L V6 12623513
🇺🇸 US 🇨🇦 CA
LeftPIVOT ARM
View on
Amazon
GM GENUINE Popular Fits: 2.8L V6 12597417
🇺🇸 US 🇨🇦 CA
UPPER PRIMARY
View on
Amazon
MELLING Popular Fits: 2.8L V6 BG5530
🇺🇸 US 🇨🇦 CA
UpperPrimary Timing Chain Guide
View on
Amazon
MELLING Popular Fits: 2.8L V6 BG5533
🇺🇸 US 🇨🇦 CA
Tensioner ArmRight
View on
Amazon
MELLING Popular Fits: 2.8L V6 BG5534
🇺🇸 US 🇨🇦 CA
Tensioner ArmLeft
View on
Amazon
CLOYES Fits: 2.8L V6 95548
🇺🇸 US 🇨🇦 CA
Guide
Fitment notes — CLOYES 95548
Guide
Right Lower
View on
Amazon
CLOYES Fits: 2.8L V6 95530
🇺🇸 US 🇨🇦 CA
Guide
Fitment notes — CLOYES 95530
Guide
Upper
View on
Amazon
CLOYES Fits: 2.8L V6 95533
🇺🇸 US 🇨🇦 CA
Tensioner ArmRight
View on
Amazon
CLOYES Fits: 2.8L V6 96127
🇺🇸 US 🇨🇦 CA
Guide
Fitment notes — CLOYES 96127
Guide
Left Upper
View on
Amazon
CLOYES Fits: 2.8L V6 95534
🇺🇸 US 🇨🇦 CA
Tensioner ArmLeft
View on
Amazon
CLOYES Fits: 2.8L V6 96128
🇺🇸 US 🇨🇦 CA
Guide
Fitment notes — CLOYES 96128
Guide
Right Upper
View on
Amazon
GM GENUINE Fits: 2.8L V6 12586959
🇺🇸 US 🇨🇦 CA
2 MOUNTING HOLESLOWER PRIMARY
View on
Amazon
GM GENUINE Fits: 2.8L V6 12597416
🇺🇸 US 🇨🇦 CA
Left2 MOUNTING HOLES
Fitment notes — GM GENUINE 12597416
Left2 MOUNTING HOLESSECONDARY
View on
Amazon
GM GENUINE Fits: 2.8L V6 12597418
🇺🇸 US 🇨🇦 CA
Right2 MOUNTING HOLES
Fitment notes — GM GENUINE 12597418
Right2 MOUNTING HOLESSECONDARY
View on
Amazon
INA Fits: 2.8L V6 ZG95548
🇺🇸 US 🇨🇦 CA
LowerPrimary
View on
Amazon
INA Fits: 2.8L V6 ZG95532
🇺🇸 US 🇨🇦 CA
RightSecondary
View on
Amazon
INA Fits: 2.8L V6 ZG95530
🇺🇸 US 🇨🇦 CA
UpperPrimary
View on
Amazon
INA Fits: 2.8L V6 ZG95531
🇺🇸 US 🇨🇦 CA
LeftSecondary
View on
Amazon
INA Fits: 2.8L V6 ZG95534
🇺🇸 US 🇨🇦 CA
Fits Tensioner ArmLeft
Fitment notes — INA ZG95534
Fits:
Tensioner ArmLeft
or:
Left Secondary
View on
Amazon
INA Fits: 2.8L V6 ZG95533
🇺🇸 US 🇨🇦 CA
Fits Tensioner ArmRight
Fitment notes — INA ZG95533
Fits:
Tensioner ArmRight
or:
Right Secondary
View on
Amazon
MELLING Fits: 2.8L V6 BG5532
🇺🇸 US 🇨🇦 CA
Right UpperSecondary Timing Chain Guide
Fitment notes — MELLING BG5532
Right UpperSecondary Timing Chain GuideReplaces Part Stamped 12586963
View on
Amazon
MELLING Fits: 2.8L V6 BG7036
🇺🇸 US 🇨🇦 CA
Left UpperSecondary Timing Chain Guide
Fitment notes — MELLING BG7036
Left UpperSecondary Timing Chain GuideFirst Design with Roller Secondary Timing ChainReplaces OE Part Number 12589010
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 R76059
🇺🇸 US 🇨🇦 CA
Right UpperSecondary Timing Chain Guide
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 R76061
🇺🇸 US 🇨🇦 CA
UpperPrimary Timing Chain Guide
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 R76054
🇺🇸 US 🇨🇦 CA
Tensioner ArmLeft
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 R76060
🇺🇸 US 🇨🇦 CA
Left UpperSecondary Timing Chain Guide
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 R76055
🇺🇸 US 🇨🇦 CA
Tensioner ArmRight
View on
Amazon
S.A. GEAR Fits: 2.8L V6 71041
🇺🇸 US 🇨🇦 CA
LowerPrimary
View on
Amazon
S.A. GEAR Fits: 2.8L V6 71030
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
S.A. GEAR Fits: 2.8L V6 71029
🇺🇸 US 🇨🇦 CA
UpperPrimary
View on
Amazon
S.A. GEAR Fits: 2.8L V6 91028
🇺🇸 US 🇨🇦 CA
Tensioner ArmRight Secondary
View on
Amazon
S.A. GEAR Fits: 2.8L V6 91029
🇺🇸 US 🇨🇦 CA
Tensioner ArmLeft Secondary
View on
Amazon
S.A. GEAR Fits: 2.8L V6 71031
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon

This table covers the guides and dampers that keep the timing chain on its path.

Timing Chain Tensioner

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 2.8L V6 BT5537
🇺🇸 US 🇨🇦 CA
New Mounting Bolts and Gasket Included
Fitment notes — MELLING BT5537
New Mounting Bolts and Gasket Included
PRIMARY
View on
Amazon
S.A. GEAR Popular Fits: 2.8L V6 91030
🇺🇸 US 🇨🇦 CA
PRIMARY
View on
Amazon
S.A. GEAR Popular Fits: 2.8L V6 91031
🇺🇸 US 🇨🇦 CA
RightSecondary
View on
Amazon
S.A. GEAR Popular Fits: 2.8L V6 91032
🇺🇸 US 🇨🇦 CA
LeftSecondary
View on
Amazon
CLOYES Fits: 2.8L V6 95536
🇺🇸 US 🇨🇦 CA
Right Upper
View on
Amazon
CLOYES Fits: 2.8L V6 95535
🇺🇸 US 🇨🇦 CA
Left Upper
View on
Amazon
CLOYES Fits: 2.8L V6 95537
🇺🇸 US 🇨🇦 CA
Right Lower
View on
Amazon
GM GENUINE Fits: 2.8L V6 12609261
🇺🇸 US 🇨🇦 CA
LeftSECONDARY
Fitment notes — GM GENUINE 12609261
LeftSECONDARYLESS BOLTS, Gasket
View on
Amazon
GM GENUINE Fits: 2.8L V6 12609263
🇺🇸 US 🇨🇦 CA
CenterLESS BOLTS, Gasket
View on
Amazon
GM GENUINE Fits: 2.8L V6 12609259
🇺🇸 US 🇨🇦 CA
RightSECONDARY, LESS BOLTS AND GASKET
Fitment notes — GM GENUINE 12609259
RightSECONDARY, LESS BOLTS AND GASKETSECONDARYLESS BOLTS, Gasket
View on
Amazon
INA Fits: 2.8L V6 ZT01481
🇺🇸 US 🇨🇦 CA
Fits PRIMARY
Fitment notes — INA ZT01481
Fits:
PRIMARY
or:
CRANK TO IDLER
or:
Right LowerIdler to Cam (Adjuster)-Secondary Drive
View on
Amazon
INA Fits: 2.8L V6 ZT01491
🇺🇸 US 🇨🇦 CA
RightIdler To CAM Adjuster
Fitment notes — INA ZT01491
RightIdler To CAM AdjusterIdler To CAM (Adjuster)-Secondary Drive
View on
Amazon
INA Fits: 2.8L V6 ZT01501
🇺🇸 US 🇨🇦 CA
LeftIdler To CAM Adjuster
Fitment notes — INA ZT01501
LeftIdler To CAM AdjusterIdler To CAM (Adjuster)-Secondary Drive
View on
Amazon
INA Fits: 2.8L V6 ZT95537
🇺🇸 US 🇨🇦 CA
PRIMARY
View on
Amazon
MELLING Fits: 2.8L V6 BT5536
🇺🇸 US 🇨🇦 CA
New Mounting Bolts and Gasket Included
Fitment notes — MELLING BT5536
New Mounting Bolts and Gasket Included
RightSecondary
View on
Amazon
MELLING Fits: 2.8L V6 BT5535
🇺🇸 US 🇨🇦 CA
New Mounting Bolts and Gasket Included
Fitment notes — MELLING BT5535
New Mounting Bolts and Gasket Included
LeftSecondary
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 T68002
🇺🇸 US 🇨🇦 CA
Right UpperSecondary
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 T68001
🇺🇸 US 🇨🇦 CA
LowerPrimary
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 T68003
🇺🇸 US 🇨🇦 CA
Left UpperSecondary
View on
Amazon
SKP Fits: 2.8L V6 SK420129
🇺🇸 US 🇨🇦 CA
Includes Both Tensioners
Fitment notes — SKP SK420129
Includes Both Tensioners
Secondary
View on
Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Chain Tensioner Gasket / Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12589479
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
GM GENUINE Fits: 2.8L V6 12589477
🇺🇸 US 🇨🇦 CA
PRIMARY
View on
Amazon

This table covers the seals at the Timing Chain Tensioner Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Cover Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 11588733
🇺🇸 US 🇨🇦 CA
M8X1.25X80
View on
Amazon

This table covers the Timing Cover bolts.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.8L V6 TCS46108
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.8L V6 JV5178
🇺🇸 US 🇨🇦 CA
Contains Water Pump Gaskets, Timing Cover Gasket and SealSet
View on
Amazon
APEX Fits: 2.8L V6 ATC11640
🇺🇸 US 🇨🇦 CA
View on
Amazon
FEL-PRO Fits: 2.8L V6 73190
🇺🇸 US 🇨🇦 CA
View on
Amazon
GM GENUINE Fits: 2.8L V6 12589478
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 T32212
🇺🇸 US 🇨🇦 CA
Molded Rubber
View on
Amazon
SKP Fits: 2.8L V6 SKTCS46108
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 711845000
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 151024401
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 2.8L V6 67828
🇺🇸 US 🇨🇦 CA
Rubber
View on
Amazon
SCHAEFFLER Fits: 2.8L V6 SS4502
🇺🇸 US 🇨🇦 CA
10.998 mm Width70.282 mm Outside Diameter
Fitment notes — SCHAEFFLER SS4502
10.998 mm Width70.282 mm Outside Diameter50.013 mm Shaft Diameter
View on
Amazon
SKF Fits: 2.8L V6 19573
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 811017400
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 2.8L V6 S1229
🇺🇸 US 🇨🇦 CA
Replaces Sprocket Stamped 12590921with 24 Teeth
View on
Amazon
CLOYES Fits: 2.8L V6 S1141
🇺🇸 US 🇨🇦 CA
View on
Amazon
INA Fits: 2.8L V6 ZSS1229
🇺🇸 US 🇨🇦 CA
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 G56003
🇺🇸 US 🇨🇦 CA
24 TeethReplaces Sprocket Stamped 12590921
View on
Amazon
S.A. GEAR Fits: 2.8L V6 S1229
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Timing Idler Sprocket

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 2.8L V6 S1225
🇺🇸 US 🇨🇦 CA
Includes Mounting Bolt
Fitment notes — MELLING S1225
Includes Mounting Bolt
LeftSecondary Roller Timing Chain
View on
Amazon
MELLING Popular Fits: 2.8L V6 S1227
🇺🇸 US 🇨🇦 CA
Includes Mounting Bolt
Fitment notes — MELLING S1227
Includes Mounting Bolt
RightSecondary Roller Timing Chain
View on
Amazon
CLOYES Fits: 2.8L V6 S1142
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
CLOYES Fits: 2.8L V6 S1143
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 G56005
🇺🇸 US 🇨🇦 CA
Mounting Bolt Included
Fitment notes — PREFERRED COMPONENTS INC G56005
Mounting Bolt Included
RightSecondary Roller Timing Chain
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.8L V6 G56006
🇺🇸 US 🇨🇦 CA
Mounting Bolt Included
Fitment notes — PREFERRED COMPONENTS INC G56006
Mounting Bolt Included
LeftSecondary Roller Timing Chain
View on
Amazon
S.A. GEAR Fits: 2.8L V6 S1227
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
S.A. GEAR Fits: 2.8L V6 S1225
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon

This table covers the Timing Idler sprockets.

Valve Cover

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 2.8L V6 264930
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
GM GENUINE Popular Fits: 2.8L V6 12641260
🇺🇸 US 🇨🇦 CA
Rightwithout Baffle
Fitment notes — GM GENUINE 12641260
Rightwithout Bafflewith FittingPlastic
View on
Amazon
AUTOTECNICA Fits: 2.8L V6 GM1414697
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
AUTOTECNICA Fits: 2.8L V6 GM1414317
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
DORMAN Fits: 2.8L V6 264925
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
GM GENUINE Fits: 2.8L V6 12647768
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
SKP Fits: 2.8L V6 SK264925
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
SKP Fits: 2.8L V6 SK264930
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
SKP Fits: 2.8L V6 SK264930AL
🇺🇸 US 🇨🇦 CA
Rightaluminum
View on
Amazon

This table covers the Valve covers.

Valve Cover Bolt Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12566250
🇺🇸 US 🇨🇦 CA
Material: Rubber
View on
Amazon

This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.8L V6 VS50726R
🇺🇸 US 🇨🇦 CA
Permadry RubberDoes Not Include Spark Plug Tube Seals
Fitment notes — FEL-PRO VS50726R
Permadry RubberDoes Not Include Spark Plug Tube SealsIncludes Valve Cover Grommets
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.8L V6 VS50500
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS50500
SetMolded RubberIncludes Grommets & Spark Plug Tube Seals
View on
Amazon
APEX Fits: 2.8L V6 AVC1164S
🇺🇸 US 🇨🇦 CA
Includes Grommets
View on
Amazon
GM GENUINE Fits: 2.8L V6 12591203
🇺🇸 US 🇨🇦 CA
Right
View on
Amazon
GM GENUINE Fits: 2.8L V6 12591200
🇺🇸 US 🇨🇦 CA
Left
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 151074401
🇺🇸 US 🇨🇦 CA
SetIncludes Grommets
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Guide

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.8L V6 GD3112
🇺🇸 US
Iron
Fitment notes — ENGINETECH GD3112
Iron
Fits:
ExhaustIntake and Exhaust .2365 X .4358 X 1.665Spiral ID
or:
IntakeIntake and Exhaust .2365 X .4358 X 1.665Spiral ID
View on
Amazon
QUALCAST Fits: 2.8L V6 303112
🇺🇸 US 🇨🇦 CA
1.655 OAL. 0.2355 I.D. 0.4358 O.D.
View on
Amazon
SBI Fits: 2.8L V6 1403112
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2365 I.D.
Fitment notes — SBI 1403112
Intake and Exhaust0.2365 I.D.0.4358 O.D.1.655 Length1-SR Type
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 L2319
🇺🇸 US
Hydraulic
Fitment notes — ENGINETECH L2319
Hydraulic
Lash adjuster
View on
Amazon
MELLING Popular Fits: 2.8L V6 JB7524
🇺🇸 US 🇨🇦 CA
Hydraulic
View on
Amazon
AJUSA Fits: 2.8L V6 85018700
🇺🇸 US 🇨🇦 CA
Engine # LP1
View on
Amazon
GM GENUINE Fits: 2.8L V6 HL129
🇺🇸 US 🇨🇦 CA
Sold Individually
View on
Amazon
QUALCAST Fits: 2.8L V6 367082
🇺🇸 US 🇨🇦 CA
Hydraulic Lash Adjuster
View on
Amazon
SBI Fits: 2.8L V6 VL175
🇺🇸 US 🇨🇦 CA
Hydraulic Lash Adjuster Type
Fitment notes — SBI VL175
Hydraulic Lash Adjuster Type
Intake and Exhaust0.472 Body Diameter1.048 Length
View on
Amazon
SEALED POWER Fits: 2.8L V6 HT2307
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Spring

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12686721
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 2.8L V6 ERV1588
🇺🇸 US
Conical
Fitment notes — ENGINETECH ERV1588
Conical
Intake and Exhaust
View on
Amazon
MELLING Fits: 2.8L V6 VS1588
🇺🇸 US 🇨🇦 CA
View on
Amazon
QUALCAST Fits: 2.8L V6 325001
🇺🇸 US 🇨🇦 CA
1.729 Free Length. Conical
View on
Amazon
SBI Fits: 2.8L V6 1601588
🇺🇸 US 🇨🇦 CA
Intake and Exhaust1.729 Length
Fitment notes — SBI 1601588
Intake and Exhaust1.729 Length1.030T O.D.0.714T I.DConical
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12575196
🇺🇸 US 🇨🇦 CA
View on
Amazon
MELLING Fits: 2.8L V6 VSR713
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12575197
🇺🇸 US 🇨🇦 CA
Material: Steel
View on
Amazon
MELLING Fits: 2.8L V6 VL1099
🇺🇸 US 🇨🇦 CA
View on
Amazon
QUALCAST Fits: 2.8L V6 345032
🇺🇸 US 🇨🇦 CA
1 Round Mid Bead. 0.235 Stem DIA.
View on
Amazon
SBI Fits: 2.8L V6 1211127
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.1955 Length
Fitment notes — SBI 1211127
Intake and Exhaust0.1955 Length1 Round bead type0.2350 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.8L V6 S360V
🇺🇸 US 🇨🇦 CA
Viton
View on
Amazon
FEL-PRO Popular Fits: 2.8L V6 SS72923
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO SS72923
Set
Intake and Exhaust
View on
Amazon
AJUSA Fits: 2.8L V6 57052700
🇺🇸 US 🇨🇦 CA
Engine # LP1
View on
Amazon
APEX Fits: 2.8L V6 AVS11064
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — APEX AVS11064
Set
Intake and Exhaust
View on
Amazon
MAHLE / CLEVITE Fits: 2.8L V6 SS45994
🇺🇸 US 🇨🇦 CA
SetMetal with Molded Rubber
Fitment notes — MAHLE / CLEVITE SS45994
SetMetal with Molded Rubber
Intake and ExhaustPositive Type
View on
Amazon
QUALCAST Fits: 2.8L V6 38603655
🇺🇸 US 🇨🇦 CA
Height (mm): 20.02Viton Top Hat.
Fitment notes — QUALCAST 38603655
Height (mm): 20.02Viton Top Hat.
Viton Top Hat
View on
Amazon
SBI Fits: 2.8L V6 1221418
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221418
Intake and ExhaustViton MaterialPositive TypeTop Hat Style6 mm Nominal Stem Diameter
View on
Amazon
ULTRA-POWER Fits: 2.8L V6 SS72923
🇺🇸 US 🇨🇦 CA
SetPremium Valve Stem Seals Included
Fitment notes — ULTRA-POWER SS72923
SetPremium Valve Stem Seals Included24 Pieces
EXHAUSTINTAKE
View on
Amazon
VICTOR REINZ Fits: 2.8L V6 121026301
🇺🇸 US 🇨🇦 CA
SetContains 24 Pieces
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Economy

Brand Part Number Markets Notes Buy
SKP Popular Fits: 2.8L V6 SK917219
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Popular Fits: 2.8L V6 917219
🇺🇸 US 🇨🇦 CA
EXHAUSTINTAKE
View on
Amazon
DORMAN Fits: 2.8L V6 917219
🇺🇸 US 🇨🇦 CA
Fits Exhaustor Intake
View on
Amazon
GATES Fits: 2.8L V6 VVS185
🇺🇸 US 🇨🇦 CA
View on
Amazon
HOLSTEIN Fits: 2.8L V6 2VTS0052
🇺🇸 US 🇨🇦 CA
View on
Amazon
ROSTRA Fits: 2.8L V6 790004
🇺🇸 US 🇨🇦 CA
Fits Exhaustor Intake
View on
Amazon
SPECTRA PREMIUM Fits: 2.8L V6 VTS1011
🇺🇸 US 🇨🇦 CA
View on
Amazon
WALKER PRODUCTS Fits: 2.8L V6 5901021
🇺🇸 US 🇨🇦 CA
Includes Oil Control Valve
View on
Amazon
WELLS Fits: 2.8L V6 2T1013
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12636175
🇺🇸 US 🇨🇦 CA
Activation Type: Electric
View on
Amazon
MELLING Popular Fits: 2.8L V6 VCTS1004
🇺🇸 US 🇨🇦 CA
View on
Amazon
BECK/ARNLEY Fits: 2.8L V6 0241979
🇺🇸 US 🇨🇦 CA
Includes Oil Control Valve
View on
Amazon
CLOYES Fits: 2.8L V6 VTS108
🇺🇸 US 🇨🇦 CA
Variable Valve Timing (VVT) Solenoid
View on
Amazon
NTK Fits: 2.8L V6 VV0013
🇺🇸 US 🇨🇦 CA
View on
Amazon
PIERBURG Fits: 2.8L V6 706117040
🇺🇸 US 🇨🇦 CA
Control ValveElectric-Hydraulic
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 2.8L V6 VVT190T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 2.8L V6 VVT190
🇺🇸 US 🇨🇦 CA
Blue Streak
View on
Amazon
VAICO Fits: 2.8L V6 V401557
🇺🇸 US 🇨🇦 CA
Oil Control
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 2.8L V6 12593717
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Sprocket

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 2.8L V6 12588273
🇺🇸 US 🇨🇦 CA
Intake
View on
Amazon
STANDARD MOTOR PRODUCTS Popular Fits: 2.8L V6 VVT637
🇺🇸 US 🇨🇦 CA
Exhaust
View on
Amazon
GATES Fits: 2.8L V6 VCP950
🇺🇸 US 🇨🇦 CA
Intake
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 2.8L V6 VVT629
🇺🇸 US 🇨🇦 CA
Intake
View on
Amazon
WELLS Fits: 2.8L V6 3T1014
🇺🇸 US 🇨🇦 CA
Exhaust
View on
Amazon
WELLS Fits: 2.8L V6 3T1013
🇺🇸 US 🇨🇦 CA
Intake
View on
Amazon

This table covers the cam phaser sprockets used by the variable-valve-timing system.

Variable Valve Timing (VVT) Sprocket Bolt

Brand Part Number Markets Notes Buy
MELLING Fits: 2.8L V6 VCTB1013
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Variable Valve Timing (VVT) Sprocket bolts.

Buying Engine Parts for a 2006 Cadillac CTS

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Timing Chain Guide / Damper and Oil .

Frequently Asked Questions

How many engine parts fit the 2006 Cadillac CTS?

Our catalog currently lists 406 engine parts for the 2006 Cadillac CTS across 78 subcategories and 66 brands, covering all 3 engine options (2.8L V6, 3.6L V6 and 6.0L V8). Each part is matched to the engine(s) it fits.

Do engine parts differ between 2006 Cadillac CTS engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2006 Cadillac CTS?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2006 Cadillac CTS?

Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2006 Cadillac CTS was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2006 Cadillac CTS?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2006 Cadillac CTS

Engine Parts for Other Cadillac CTS Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.