2006 Chrysler 300 Engine Parts

This table covers the camshafts that open the valves. Read more

8 Camshaft parts for the 2006 Chrysler 300 come from 3 brands — MELLING, MOPAR and ENGINETECH. The "Popular" part is MELLING 23108.

The High Performance section lists 4 options from MELLING — engineered beyond original-equipment specification. MELLING 23108 is listed in this group.

In the Standard Replacement grade, ENGINETECH, MELLING and MOPAR supply 3 parts: built to original-equipment specification. A representative part number is ENGINETECH ES2065.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: MELLING 23108, MELLING 23107 and MELLING 23207, plus the other parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Camshaft Bearing parts for the 2006 Chrysler 300 come from 5 brands — ENGINETECH, DURA-BOND, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH CC484.

Part numbers include ENGINETECH CC484, ENGINETECH CC484G and DURA-BOND PD31B, among others listed above.

This table covers the gaskets that seal the Camshaft Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO ES73216.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MELLING MEP334.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 2006 Chrysler 300, from SKF, BCA, NATIONAL and 2 other brands. SKF 99146 carries the "Popular" badge.

Part numbers include SKF 99146 and BCA NS99146, among others listed above.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 2006 Chrysler 300 — MOPAR 4556518AB.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts are listed for the 2006 Chrysler 300, from MOPAR, SKF, APEX and 10 other brands. APEX ATC2360 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2006 Chrysler 300 — ELRING B16450.

This table covers the connecting rods between each piston and the crankshaft. Read more

3 Connecting Rod parts for the 2006 Chrysler 300 come from ENGINETECH.

This group includes ENGINETECH ECR119, ENGINETECH ECR112 and ENGINETECH ECR112N.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

23 Connecting Rod Bearing parts for the 2006 Chrysler 300 come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BB111J.

The High Performance section: 4 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS CR8032XPN is listed in this group.

Standard Replacement: 11 parts, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. A representative part number is ENGINETECH BB111J.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Conversion / Lower Gasket Set parts for the 2006 Chrysler 300 come from 8 brands — ENGINETECH, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is ENGINETECH CR215CSE.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2006 Chrysler 300 come from ENGINETECH.

Part numbers include ENGINETECH 139300 and ENGINETECH 139700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 2006 Chrysler 300, from MAHLE / CLEVITE, ENGINETECH, SEALED POWER and 1 other brand. ENGINETECH BC115J carries the "Popular" badge.

High Performance: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE MS2220H.

The Standard Replacement section: 4 options from MAHLE / CLEVITE, ENGINETECH and SEALED POWER. ENGINETECH BC115J is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: ARP 2445400.

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ULTRA-POWER BS40734.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

2 Crankshaft Main Bearing Repair Sleeve parts for the 2006 Chrysler 300 come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16262 and VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2006 Chrysler 300, from FEL-PRO, MAHLE / CLEVITE, SCHAEFFLER and 2 other brands.

Part numbers include FEL-PRO 16230, MAHLE / CLEVITE A351 and SCHAEFFLER SR3462, among others listed above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

3 Crankshaft Repair Sleeve Tool parts are listed for the 2006 Chrysler 300, from VICTOR REINZ and FEL-PRO.

This group includes FEL-PRO 16328, VICTOR REINZ 711457400 and VICTOR REINZ 711620300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

40 Crankshaft Seal parts are listed for the 2006 Chrysler 300, from APEX, FEL-PRO, VICTOR REINZ and 11 other brands. APEX ATC2751 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 907600.

This table covers the kits that disable cylinder deactivation. Read more

One part is listed for the 2006 Chrysler 300 — MELLING MDK600.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

6 Cylinder Deactivation Solenoid parts are listed for the 2006 Chrysler 300, from GPD, STANDARD MOTOR PRODUCTS, CLOYES and 3 other brands. GPD 1815788 carries the "Popular" badge.

Part numbers include GPD 1815788, STANDARD MOTOR PRODUCTS CDS02 and CLOYES VTS231, among others listed above.

This table covers the cylinder heads that close the top of the block. Read more

8 Cylinder Head parts are listed for the 2006 Chrysler 300, from ENGINETECH, CYLINDER HEAD EXPRESS and ENGINE PRO. CYLINDER HEAD EXPRESS CI208BL carries the "Popular" badge.

Listed part numbers: CYLINDER HEAD EXPRESS CI208BL, CYLINDER HEAD EXPRESS CI208BR and ENGINE PRO 910057, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts for the 2006 Chrysler 300 come from 7 brands — ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 4 other brands. The "Popular" part is ENGINETECH HB228.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

34 Cylinder Head Gasket parts for the 2006 Chrysler 300 come from 9 brands — ELRING, MAHLE / CLEVITE, APEX and 6 other brands. The "Popular" part is APEX AHG280L. A list this long means Cylinder Head Gasket applications vary by configuration — the notes carry the qualifiers.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

23 Cylinder Head Gasket Set parts for the 2006 Chrysler 300 come from 9 brands — ENGINETECH, FEL-PRO, ELRING and 6 other brands. The "Popular" part is ENGINETECH CR215HSD.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2006 Chrysler 300 — MOPAR 4556020AB.