2006 Chrysler Crossfire Electrical Connector Parts

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 A/C Refrigerant Pressure Switch Connector parts are listed for the 2006 Chrysler Crossfire, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 1 other brand. WELLS 1P1421 carries the "Popular" badge.

This group includes WELLS 1P1421, FOUR SEASONS 70009 and STANDARD MOTOR PRODUCTS HP3975 and the remaining parts above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1057.

This table covers the Adapter plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 68021352AA.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ambient Air Temperature Sensor Connector parts for the 2006 Chrysler Crossfire come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Part numbers include HOLSTEIN 2HAR0036 and STANDARD MOTOR PRODUCTS S1686.

This table covers the harness connectors at the Back Up / Reverse Lamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Chrysler Crossfire — WELLS 1P3332.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 5161481AA.

This table covers the harness connectors at the Brake Light Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Relay Connector parts for the 2006 Chrysler Crossfire come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Camshaft Position Sensor Connector parts for the 2006 Chrysler Crossfire come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, SKP and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1038.

Part numbers include STANDARD MOTOR PRODUCTS S1038, ROSTRA 610265 and SKP SKS1038, among others listed above.

This table covers the harness connectors at the Coolant Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2265.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2879.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 EGR Valve Connector parts for the 2006 Chrysler Crossfire come from 4 brands — STANDARD MOTOR PRODUCTS, ACDELCO, WALKER PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS HP3860.

Part numbers include STANDARD MOTOR PRODUCTS HP3860, ACDELCO PT2164 and STANDARD MOTOR PRODUCTS S697, among others listed above.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 5101247AA.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 6S1046.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fuel Injector Connector parts for the 2006 Chrysler Crossfire come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3980.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3980, WELLS 1P1347 and ACDELCO PT2384, plus the other parts above.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2006 Chrysler Crossfire — STANDARD MOTOR PRODUCTS LWH105.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Ignition Coil Connector parts for the 2006 Chrysler Crossfire come from 3 brands — SKP, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include SKP SKS1038, UNITED MOTOR PRODUCTS CON7 and WELLS 1P2218.

This table covers the harness connectors at the Instrument Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 5140991AA.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Knock / Detonation Sensor Connector parts for the 2006 Chrysler Crossfire come from 3 brands — ROSTRA, WALKER PRODUCTS and WELLS.

This group includes ROSTRA 610049, WALKER PRODUCTS 2701034 and WELLS 1P1002.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Manifold Pressure (MAP) Sensor Connector parts for the 2006 Chrysler Crossfire come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2393 and WELLS 1P2024.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Chrysler Crossfire — STANDARD MOTOR PRODUCTS S2841.

This table covers the harness connectors at the Oil Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2393.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 3 Radio Connector parts for the 2006 Chrysler Crossfire.

Listed part numbers: METRA 711784, METRA 709401 and METRA 719401EU.

This table covers the harness connectors at the Speaker. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Chrysler Crossfire — METRA 721002.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts for the 2006 Chrysler Crossfire come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2HAR0036 and STANDARD MOTOR PRODUCTS S1686.

This table covers the harness connectors at the Turn Signal Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Turn Signal Relay Connector parts for the 2006 Chrysler Crossfire come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Vapor Canister. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Connector parts are listed for the 2006 Chrysler Crossfire, from HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2HAR0036 and STANDARD MOTOR PRODUCTS S1686.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Vapor Canister Purge Valve / Solenoid Connector parts for the 2006 Chrysler Crossfire come from 4 brands — STANDARD MOTOR PRODUCTS, ACDELCO, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS HP3860.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3860, ACDELCO PT2164 and STANDARD MOTOR PRODUCTS S697, plus the other parts above.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Washer Fluid Level Sensor Connector parts for the 2006 Chrysler Crossfire come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

This group includes HOLSTEIN 2HAR0036 and STANDARD MOTOR PRODUCTS S1686.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Washer Pump Connector parts for the 2006 Chrysler Crossfire come from 2 brands — STANDARD MOTOR PRODUCTS and WAI GLOBAL.

Part numbers include STANDARD MOTOR PRODUCTS S2279 and WAI GLOBAL 399002.