2006 Chrysler Crossfire Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

14 Alternator / Generator parts for the 2006 Chrysler Crossfire come from 10 brands — WAI GLOBAL, PURE ENERGY, REMY and 7 other brands. The "Popular" part is SKP SK13884.

The New section lists 5 options from SKP, WAI GLOBAL, PURE ENERGY and 2 other brands — brand-new units rather than rebuilt ones. SKP SK13884 is listed in this group.

The Remanufactured section lists 9 options from REMY, TERREPOWER, WAI GLOBAL and 4 other brands — factory-rebuilt units with new wear components. WAI GLOBAL 13884R is listed in this group.

This table covers the Alternator / Generator bolts. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 6104700AA.

This table covers the brackets that mount the Alternator / Generator. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 5096529AA.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

7 Battery parts are listed for the 2006 Chrysler Crossfire, from DEKA, LUCAS, ACDELCO and 4 other brands. DEKA 9A48 carries the "Popular" badge.

The AGM (Extended Life) section lists 6 options from DEKA, LUCAS, ACDELCO and 3 other brands — grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. DEKA 9A48 is listed in this group.

The Performance AGM (Extended Life + Increased Power) section lists 1 option from FULLRIVER — grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. FULLRIVER FT68048 is listed in this group.

Part numbers include DEKA 9A48, LUCAS LBAGM004A and ACDELCO 48AGM, among others listed above.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

This group shows a single part: MOPAR 5097568AA.

This table covers the terminals and clamps that connect cables to the battery posts. Read more

DEKA supplies both parts for the 2006 Chrysler Crossfire.

Part numbers include DEKA 00350 and DEKA 01056.

This table covers the covers that protect battery terminals. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 5098850AA.

This table covers the flasher units that blink the turn signals and hazards. Read more

One part is listed for the 2006 Chrysler Crossfire — ROSTRA 600505.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

21 Fuse parts are listed for the 2006 Chrysler Crossfire, from BUSSMANN and LITTELFUSE. BUSSMANN ATC10 carries the "Popular" badge.

The 10 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATC10 is listed in this group.

In the 15 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATC15.

In the 20 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATC20.

The 30 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATC30 is listed in this group.

In the 40 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATC40ID.

The 5 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "5 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATC5 is listed in this group.

In the 7.5 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "7.5 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATC712ID.

This table covers the horns mounted in the front of the vehicle. Read more

FIAMM supplies the 13 Horn parts for the 2006 Chrysler Crossfire. FIAMM 7210223 carries the "Popular" badge.

In the Accessory Replacement grade, FIAMM supplies 7 parts: grouped under the catalog's "Accessory Replacement" designation — the notes column spells out what sets them apart. A representative part number is FIAMM 7210223.

The Standard Replacement section lists 6 options from FIAMM — built to original-equipment specification. FIAMM 7201223 is listed in this group.

This table covers the Power Door Resistance Pinch sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Power Door Resistance Pinch Sensor parts for the 2006 Chrysler Crossfire come from 2 brands — WELLS and NTK.

Listed part numbers: NTK PD0019, WELLS 5S6990 and WELLS 5S9373.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

4 Speed Sensor parts are listed for the 2006 Chrysler Crossfire, from HOLSTEIN, GPD and STANDARD MOTOR PRODUCTS.

In the Economy grade, HOLSTEIN and GPD supply 3 parts: the catalog's value-priced group. A representative part number is GPD 1815672.

The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS TCP03 is listed in this group.

Part numbers include GPD 1815672, HOLSTEIN 2VSS0460 and HOLSTEIN 2VSS0157, among others listed above.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

10 Starter Motor parts for the 2006 Chrysler Crossfire come from 7 brands — BOSCH, REMY, TERREPOWER and 4 other brands. The "Popular" part is TYC 117852.

The New section: 5 options from TYC, BOSCH, REMY and 2 other brands. TYC 117852 is listed in this group.

The Remanufactured section: 5 options from PURE ENERGY, BOSCH, FVP and 2 other brands. PURE ENERGY 17852 is listed in this group.

This table covers the Yaw sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2006 Chrysler Crossfire — WELLS 5S7039.