2006 Chrysler Crossfire Automatic Transmission Parts

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

5 Conductor Plate parts for the 2006 Chrysler Crossfire come from 4 brands — SKP, DORMAN, ULTRA-POWER and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TCP01.

The Economy section lists 4 options from SKP, DORMAN and ULTRA-POWER — the catalog's value-priced group. DORMAN 917678 is listed in this group.

In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS TCP01.

Part numbers include STANDARD MOTOR PRODUCTS TCP01, DORMAN 917678 and SKP SK917679, among others listed above.

This table covers the Dipstick / Fluid Filler tubes. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 5098738AA.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 5073946AA.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Extension Housing Seal parts for the 2006 Chrysler Crossfire come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS224250, NATIONAL 224250 and WJB / INMOTION PARTS WS224250.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

10 Filter parts are listed for the 2006 Chrysler Crossfire, from ELRING, MOPAR, VAICO and 5 other brands. ACDELCO TF357 carries the "Popular" badge.

The Basic Kit (Without Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V302254BEK is listed in this group.

Economy: 3 parts, from ELRING and VARIOUS MFR. A representative part number is ELRING 444960.

The Standard Replacement section: 6 options from MOPAR, ACDELCO, WIX and 2 other brands. ACDELCO TF357 is listed in this group.

This table covers the pans that hold automatic-transmission fluid. Read more

3 Fluid Pan parts for the 2006 Chrysler Crossfire come from 3 brands — DORMAN, MOPAR and REIN.

Part numbers include DORMAN 265866, MOPAR 52108326AA and REIN ESK0135.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Fluid Pan Gasket parts are listed for the 2006 Chrysler Crossfire, from ELRING, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include ELRING 295540, FEL-PRO TOS18764 and MAHLE / CLEVITE W32819, among others listed above.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

MOPAR supplies both parts for the 2006 Chrysler Crossfire.

Part numbers include MOPAR 5080070AB and MOPAR RL087860AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts for the 2006 Chrysler Crossfire come from 4 brands — JAPANESE OE, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 710608.

Part numbers include NATIONAL 710608, BCA NS710608 and JAPANESE OE 91212PNC004, among others listed above.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

This group shows a single part: VICTOR REINZ 711917000.

This table covers the Kickdown solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: MOPAR 52108314AA.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 2006 Chrysler Crossfire come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711035 and WJB / INMOTION PARTS WS711035.

This table covers the O-rings and seals at this joint. Read more

This group shows a single part: ELRING 428390.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Output Shaft Bearing parts for the 2006 Chrysler Crossfire come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6206 is listed in this group.

Standard Replacement: 2 parts, from BCA and NATIONAL. A representative part number is BCA NB206.

This group includes WJB / INMOTION PARTS RB6206, BCA NB206 and NATIONAL 206.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts are listed for the 2006 Chrysler Crossfire, from SKF and TIMKEN.

Listed part numbers: SKF 16521 and TIMKEN 224250.

This table covers the parking pawls that lock the transmission in Park. Read more

One part is listed for the 2006 Chrysler Crossfire — MOPAR 52108154AA.

This table covers the Plug adapters. Read more

3 Plug Adapter parts for the 2006 Chrysler Crossfire come from 3 brands — DORMAN, ROSTRA and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 917505, ROSTRA 3500175 and STANDARD MOTOR PRODUCTS TCPA01.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2006 Chrysler Crossfire — WELLS 2N1281.

This table covers the rebuild kits for this assembly. Read more

2 Rebuild Kit parts for the 2006 Chrysler Crossfire come from TRANSTEC.

Part numbers include TRANSTEC 81000217 and TRANSTEC 81000417.

This table covers the Shift Improvement kits. Read more

One part is listed for the 2006 Chrysler Crossfire — TRANSGO SK7226A.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

7 Shift Solenoid parts for the 2006 Chrysler Crossfire come from 4 brands — MOPAR, STANDARD MOTOR PRODUCTS, WELLS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TCS208.

This group includes STANDARD MOTOR PRODUCTS TCS208, WELLS 2N1325 and ATP ME1 and the remaining parts above.

This table covers the Sun gears. Read more

2 Sun Gear parts for the 2006 Chrysler Crossfire come from MOPAR.

Part numbers include MOPAR 5098746AA and MOPAR 5101050AA.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts are listed for the 2006 Chrysler Crossfire, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS TCS331 and WELLS 2N1257.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts for the 2006 Chrysler Crossfire come from 2 brands — ACDELCO and SCHAEFFLER.

Listed part numbers: ACDELCO 710608 and SCHAEFFLER SS2749.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

27 Transmission Fluid parts are listed for the 2006 Chrysler Crossfire, from VALVOLINE, LIQUI MOLY, PENTOSIN and 3 other brands. ACDELCO 109243 carries the "Popular" badge. Grades run from ATF 134 through Type III (H); Multi-Vehicle is the most populated section, led by LIQUI MOLY, VALVOLINE, LUCAS OIL and 2 other brands.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 6 Transmission Fluid Additive parts for the 2006 Chrysler Crossfire. LUBEGARD 19610 carries the "Popular" badge.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2006 Chrysler Crossfire come from 5 brands — ÜRO PARTS, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ÜRO PARTS 2122400418.

The Economy section: 1 option from ÜRO PARTS. ÜRO PARTS 2122400418 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 9268.

Part numbers include ÜRO PARTS 2122400418, ANCHOR 9268 and DEA / MARMON RIDE CONTROL A7098, among others listed above.

This table covers the Transmission service kits. Read more

3 Transmission Service Kit parts for the 2006 Chrysler Crossfire come from 2 brands — VAICO and REIN.

In the Expert Kit (Basic Kit & Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254.

The Expert Kit + (Expert Kit and Extra Oil for Rinsing) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. VAICO V302254XXL is listed in this group.

Standard Replacement: 1 part, from REIN. A representative part number is REIN TSK0019.

This group includes VAICO V302254, VAICO V302254XXL and REIN TSK0019.

This table covers the Valve Body covers. Read more

This group shows a single part: MOPAR 5134761AA.