2006 Chrysler Pacifica Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2006 Chrysler Pacifica — MOPAR 4792743AB.

This table covers the gaskets that seal the Camshaft Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2006 Chrysler Pacifica — FEL-PRO ES73216.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 2006 Chrysler Pacifica come from 5 brands — TIMKEN, BCA, NATIONAL and 2 other brands. The "Popular" part is TIMKEN KWK99112.

Listed part numbers: TIMKEN KWK99112, BCA NS99146 and NATIONAL 99146, plus the other parts above.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: MOPAR 4556518AB.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts for the 2006 Chrysler Pacifica come from 12 brands — AJUSA, MOPAR, APEX and 9 other brands. The "Popular" part is APEX ATC2360.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2006 Chrysler Pacifica — ENGINETECH ECR119.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts are listed for the 2006 Chrysler Pacifica, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. ENGINETECH BB103J carries the "Popular" badge.

Listed part numbers: ENGINETECH BB103J, MAHLE / CLEVITE CB1669A6 and KING ENGINE BEARINGS CR6675AM, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2006 Chrysler Pacifica, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX ACS2080 carries the "Popular" badge.

This group includes APEX ACS2080, FEL-PRO CS26208 and AJUSA 54146100 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2006 Chrysler Pacifica come from 3 brands — MAHLE / CLEVITE, ENGINETECH and KING ENGINE BEARINGS.

This group includes ENGINETECH BC106J, KING ENGINE BEARINGS MB4040SI and MAHLE / CLEVITE MS2210A and the remaining parts above.

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2006 Chrysler Pacifica — ULTRA-POWER BS40734.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 2006 Chrysler Pacifica — FEL-PRO 16262.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2006 Chrysler Pacifica come from 3 brands — SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS.

Part numbers include SCHAEFFLER SR3462, TIMKEN KWK99112 and WJB / INMOTION PARTS WS99112.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: VICTOR REINZ 711457400.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Crankshaft Seal parts for the 2006 Chrysler Pacifica come from 9 brands — FEL-PRO, VICTOR REINZ, APEX and 6 other brands. The "Popular" part is BCA NS3638.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2006 Chrysler Pacifica, from FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. FEL-PRO ES72895 carries the "Popular" badge.

Part numbers include FEL-PRO ES72895, MAHLE / CLEVITE GS33373 and APEX AHB236, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts are listed for the 2006 Chrysler Pacifica, from APEX, FEL-PRO, ELRING and 4 other brands. APEX AHG280L carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 2006 Chrysler Pacifica, from ENGINETECH, FEL-PRO, AJUSA and 5 other brands. ENGINETECH CR215HSD carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 4556020AB.

This table covers the Cylinder Head Spacer shims. Read more

3 Cylinder Head Spacer Shim parts are listed for the 2006 Chrysler Pacifica, from SBI and ENGINETECH.

Listed part numbers: ENGINETECH CHS1060, SBI 2302072L and SBI 2302072R.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2006 Chrysler Pacifica come from 2 brands — KAT'S HEATERS and MOPAR.

This group includes KAT'S HEATERS 11814 and MOPAR 4609325.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2006 Chrysler Pacifica, from AJUSA and ENGINETECH.

Part numbers include AJUSA 50265000 and ENGINETECH CR215K3.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2006 Chrysler Pacifica — ENGINETECH RCCR215EP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2006 Chrysler Pacifica come from 5 brands — SKP, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is SKP SKV2787.

Part numbers include SKP SKV2787, ENGINETECH V2787 and MAHLE / CLEVITE 2113214, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

ENGINETECH supplies both parts for the 2006 Chrysler Pacifica.

This group includes ENGINETECH PK68 and ENGINETECH PK68B.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2006 Chrysler Pacifica, from ATP, DAYCO, DORMAN and 1 other brand.

Listed part numbers: ATP 102374, DAYCO PB1569N and DORMAN 594439, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts for the 2006 Chrysler Pacifica come from MOPAR.

Listed part numbers: MOPAR 4591822AH and MOPAR 4591822AI.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2006 Chrysler Pacifica — MOPAR 4591825AC.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2006 Chrysler Pacifica, from MAHLE / CLEVITE, APEX, FEL-PRO and 2 other brands. APEX AMS2801 carries the "Popular" badge.

This group includes APEX AMS2801, FEL-PRO MS921651 and MAHLE / CLEVITE MS16210B and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2006 Chrysler Pacifica come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS96324.

Part numbers include FEL-PRO MS96324, APEX AMS2800 and MAHLE / CLEVITE MS19537, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2006 Chrysler Pacifica come from 5 brands — SKP, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is SKP SKV1901.

This group includes SKP SKV1901, ENGINETECH V3408 and MAHLE / CLEVITE 2114122 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 2006 Chrysler Pacifica come from 6 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. The "Popular" part is SKP SKM3084.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SKM3084 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands supply 8 parts: built to original-equipment specification. A representative part number is ANCHOR 3084.

This table covers the Motor Mount bolts. Read more

One part is listed for the 2006 Chrysler Pacifica — MOPAR 4809963AE.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 4809779AB.

This table covers the isolators in an engine mount. Read more

MOPAR supplies both parts for the 2006 Chrysler Pacifica.

This group includes MOPAR 4809780AD and MOPAR 5510007AD.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 2006 Chrysler Pacifica come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, SKP and 1 other brand.

This group includes ANCHOR 301317, DEA / MARMON RIDE CONTROL MK5001 and SKP SKM3034K and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts for the 2006 Chrysler Pacifica come from 5 brands — VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 19 parts from VALVOLINE, MOBIL, LIQUI MOLY and 1 other brand.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

4 Oil Cooler parts for the 2006 Chrysler Pacifica come from 3 brands — MOPAR, STANDARD MOTOR PRODUCTS and VEMO.

Part numbers include MOPAR 4792907AB, MOPAR 5159083AA and STANDARD MOTOR PRODUCTS OCK45, among others listed above.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: MOPAR 5005372AA.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2006 Chrysler Pacifica.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

3 Oil Dipstick / Tube parts for the 2006 Chrysler Pacifica come from 2 brands — MOPAR and DORMAN.

Part numbers include DORMAN 917334, MOPAR 4792670AB and MOPAR 4792671AA.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2006 Chrysler Pacifica come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is AGS ODP00007.

Listed part numbers: AGS ODP00007, DORMAN 090053 and DORMAN 090115, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2006 Chrysler Pacifica, from MAHLE / CLEVITE, APEX, ELRING and 2 other brands. MAHLE / CLEVITE 2051 carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE 2051, APEX ADP1902 and ELRING 176090, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2006 Chrysler Pacifica come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2314, GATES 31103 and MOTORAD MO99 and the remaining parts above.