2019 Chrysler Pacifica Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 085700.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2019 Chrysler Pacifica — ENGINETECH BB175J.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2019 Chrysler Pacifica, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 54308900, MAHLE / CLEVITE CS55401 and VICTOR REINZ 081022201.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2019 Chrysler Pacifica come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 2019 Chrysler Pacifica come from 5 brands — WJB / INMOTION PARTS, ELRING, NATIONAL and 2 other brands. The "Popular" part is ELRING 424841.

This group includes ELRING 424841, NATIONAL 710937 and AJUSA 15084500 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2019 Chrysler Pacifica, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO ES72467 carries the "Popular" badge.

Part numbers include FEL-PRO ES72467, AJUSA 81062400 and APEX AHB1312, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 2019 Chrysler Pacifica, from AJUSA, APEX, MAHLE / CLEVITE and 1 other brand. APEX AHG1391L carries the "Popular" badge.

Listed part numbers: APEX AHG1391L, APEX AHG1391R and AJUSA 10252500, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2019 Chrysler Pacifica, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 52574600, MAHLE / CLEVITE HS55401 and VICTOR REINZ 021135801.

This table covers the gaskets that seal the Cylinder Head Side Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 Chrysler Pacifica — MOPAR 4893804AB.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2019 Chrysler Pacifica come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11814 and KAT'S HEATERS 28814.

This table covers the Engine covers. Read more

9 Engine Cover parts are listed for the 2019 Chrysler Pacifica, from MOPAR, TECHPRO and VARIOUS MFR. MOPAR 68227444AG carries the "Popular" badge.

This group includes MOPAR 68227444AG, MOPAR 5RJ47DX9AG and MOPAR 68227299AA and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2019 Chrysler Pacifica — AJUSA 50525900.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2019 Chrysler Pacifica come from 2 brands — MELLING and SBI.

Listed part numbers: MELLING V3462 and SBI 13462.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2019 Chrysler Pacifica, from SKP, ATP, DAYCO and 2 other brands.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594405.

The Standard Replacement section lists 4 options from ATP, DAYCO, DORMAN and 1 other brand — built to original-equipment specification. ATP 102343 is listed in this group.

This group includes SKP SK594405, ATP 102343 and DAYCO PB1707N and the remaining parts above.

This table covers the Intake Manifold bolts. Read more

2 Intake Manifold Bolt parts are listed for the 2019 Chrysler Pacifica, from DORMAN and MOPAR.

Listed part numbers: DORMAN 32128 and MOPAR 6104124AA.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2019 Chrysler Pacifica, from MAHLE / CLEVITE, APEX, FEL-PRO and 2 other brands. APEX AMS13121 carries the "Popular" badge.

This group includes APEX AMS13121, FEL-PRO MS97204 and ELRING 088990 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2019 Chrysler Pacifica come from 5 brands — FEL-PRO, APEX, ELRING and 2 other brands. The "Popular" part is FEL-PRO MS97205.

This group includes FEL-PRO MS97205, APEX AMS13120 and ELRING 088970 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2019 Chrysler Pacifica come from 3 brands — MELLING, QUALCAST and SBI.

Part numbers include MELLING V3461, QUALCAST 1013461 and SBI 13461.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2019 Chrysler Pacifica come from 4 brands — ANCHOR, SKP, DEA / MARMON RIDE CONTROL and 1 other brand. The "Popular" part is ANCHOR 3519.

The Economy section: 1 option from SKP. SKP SKM3519 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. A representative part number is ANCHOR 3519.

Listed part numbers: ANCHOR 3519, SKP SKM3519 and ANCHOR 3645, plus the other parts above.

This table covers the Motor Mount bolts. Read more

One part is listed for the 2019 Chrysler Pacifica — MOPAR 6511685AA.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301052.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

26 Oil parts for the 2019 Chrysler Pacifica come from 5 brands — VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. The "Popular" part is LIQUI MOLY 2208. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 20 parts from VALVOLINE, LIQUI MOLY, PENTOSIN and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2019 Chrysler Pacifica come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2OFH0003 and STANDARD MOTOR PRODUCTS OFH111.

This table covers the seals at the Oil Cooler Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO ES73248.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Cooler Gasket parts are listed for the 2019 Chrysler Pacifica, from AJUSA, ELRING and MAHLE / CLEVITE.

Listed part numbers: AJUSA 77016800, ELRING 512820 and MAHLE / CLEVITE GS33753.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: MOPAR 68248561AD.

This table covers the Oil Cooler Mounting kits. Read more

One part is listed for the 2019 Chrysler Pacifica — VICTOR REINZ 131001101.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2019 Chrysler Pacifica come from 3 brands — DORMAN, AGS and SKP. The "Popular" part is AGS ODP00007.

Listed part numbers: AGS ODP00007, DORMAN 090053 and AGS ODP00012, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 Chrysler Pacifica — FEL-PRO 72907.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2019 Chrysler Pacifica come from 2 brands — GATES and MOTORAD.

Part numbers include GATES 31299 and MOTORAD MO205.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2019 Chrysler Pacifica come from 16 brands — WIX, PRO-TEC, BOSCH and 13 other brands. The "Popular" part is PRO-TEC PXL10010.

The Economy section: 8 options from PRO-TEC, BOSCH, CHAMP / LUBER-FINER and 5 other brands. PRO-TEC PXL10010 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX WL10010XP is listed in this group.

Standard Replacement: 7 parts, from HENGST, WIX, ACDELCO and 4 other brands. A representative part number is HENGST E721HD271.

This table covers the Oil Filter covers. Read more

5 Oil Filter Cover parts are listed for the 2019 Chrysler Pacifica, from DORMAN, MOTORAD, STANDARD MOTOR PRODUCTS and 2 other brands. DORMAN 917190 carries the "Popular" badge.

Part numbers include DORMAN 917190, MOTORAD MO327 and STANDARD MOTOR PRODUCTS OFC101, among others listed above.

This table covers the Oil Filter housings. Read more

6 Oil Filter Housing parts are listed for the 2019 Chrysler Pacifica, from AUTOTECNICA, DORMAN, SKP and 2 other brands. DORMAN 926959 carries the "Popular" badge.

Part numbers include DORMAN 926959, SKP SK926959 and AUTOTECNICA CY1419128, among others listed above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: DORMAN 926959G.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2019 Chrysler Pacifica come from 2 brands — MELLING and SEALED POWER.

Part numbers include MELLING M588 and SEALED POWER 22443710.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts are listed for the 2019 Chrysler Pacifica, from CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES C990, MELLING 1072 and S.A. GEAR C1137.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts for the 2019 Chrysler Pacifica come from 3 brands — CLOYES, MELLING and S.A. GEAR.

Part numbers include CLOYES 96150, MELLING BT7034 and S.A. GEAR 91274.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts are listed for the 2019 Chrysler Pacifica, from MELLING and SEALED POWER.

This group includes MELLING 426S and SEALED POWER 22415131.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts are listed for the 2019 Chrysler Pacifica, from CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES S1177, MELLING S1254 and S.A. GEAR S1412.