2006 Chrysler Sebring Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

18 Coolant / Antifreeze parts for the 2006 Chrysler Sebring come from 6 brands — PRESTONE, VALVOLINE, PEAK and 3 other brands. The "Popular" part is FVP MV5050GAL.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 3 options from FVP, PEAK and PRESTONE — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE ZXG051.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, VALVOLINE, PRESTONE, ACDELCO and 2 other brands supply 8 parts: built to original-equipment specification. A representative part number is ACDELCO 105027.

This table covers the Coolant filler necks. Read more

2 Coolant Filler Neck parts are listed for the 2006 Chrysler Sebring, from FOUR SEASONS and SKP.

Part numbers include FOUR SEASONS 85042 and SKP SK902863.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2006 Chrysler Sebring — VICTOR REINZ 411043200.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

2 Coolant Reservoir parts are listed for the 2006 Chrysler Sebring, from DORMAN and GPD.

This group includes DORMAN 603474 and GPD 2411363.

This table covers the Cooling Fan control modules. Read more

US MOTOR WORKS supplies the 3 Cooling Fan Control Module parts for the 2006 Chrysler Sebring.

This group includes US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2006 Chrysler Sebring come from 3 brands — ACDELCO, GATES and MOTORAD.

Part numbers include ACDELCO 12A01, GATES 31413 and MOTORAD 3003.

This table covers the Hose clamps. Read more

This group shows a single part: MOPAR 4809146AA.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

10 Radiator parts for the 2006 Chrysler Sebring come from 10 brands — ULTRA-POWER, FAMOUS BRAND, TYC and 7 other brands. The "Popular" part is ULTRA-POWER 2323.

The Economy section: 2 options from ULTRA-POWER and FAMOUS BRAND. ULTRA-POWER 2323 is listed in this group.

Standard Replacement: 8 parts, from TYC, AGILITY, FVP and 5 other brands. A representative part number is TYC 2323.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

9 Radiator Cap parts for the 2006 Chrysler Sebring come from 5 brands — SKP, MOTORAD, GATES and 2 other brands. The "Popular" part is MOTORAD ST18.

In the Locking Replacement grade, MOTORAD, GATES and SKP supply 3 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is MOTORAD ST18.

Standard Replacement: 6 parts, from SKP, MOTORAD, CALORSTAT and 2 other brands. A representative part number is MOTORAD T18.

Listed part numbers: MOTORAD ST18, GATES 31535 and SKP SKST18, plus the other parts above.

This table covers the petcocks used to drain the radiator. Read more

2 Radiator Drain Petcock parts are listed for the 2006 Chrysler Sebring, from DORMAN and MOPAR.

Listed part numbers: DORMAN 61134 and MOPAR 4644269.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts are listed for the 2006 Chrysler Sebring, from GPD, AGILITY, FOUR SEASONS and 3 other brands. AGILITY 6017114 carries the "Popular" badge.

Economy: 1 part, from GPD. A representative part number is GPD 2811549.

The Standard Replacement section: 5 options from AGILITY, FOUR SEASONS, TYC and 2 other brands. AGILITY 6017114 is listed in this group.

This group includes AGILITY 6017114, GPD 2811549 and FOUR SEASONS 75468 and the remaining parts above.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Radiator Fan Motor parts for the 2006 Chrysler Sebring come from 2 brands — FOUR SEASONS and VDO / CONTINENTAL.

This group includes FOUR SEASONS 35058 and VDO / CONTINENTAL PM9264.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

8 Radiator Hose parts are listed for the 2006 Chrysler Sebring, from ACDELCO, GATES, CONTINENTAL and 1 other brand. ACDELCO 24379L carries the "Popular" badge.

Listed part numbers: ACDELCO 24379L, GATES 22357 and ACDELCO 22416M, plus the other parts above.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2006 Chrysler Sebring — MOPAR 4758300AB.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

One part is listed for the 2006 Chrysler Sebring — DORMAN 963141D.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

14 Temperature Sender / Sensor parts for the 2006 Chrysler Sebring come from 13 brands — STANDARD MOTOR PRODUCTS, SKP, CALORSTAT and 10 other brands. The "Popular" part is SKP SKTX98.

The Economy section: 8 options from SKP, STANDARD MOTOR PRODUCTS, CALORSTAT and 5 other brands. SKP SKTX98 is listed in this group.

Standard Replacement: 6 parts, from NTK, DELPHI, MOPAR and 3 other brands. A representative part number is NTK EF0094.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

16 Thermostat parts are listed for the 2006 Chrysler Sebring, from MOTORAD, CALORSTAT, VEMO and 3 other brands. MOTORAD 2340195 carries the "Popular" badge.

Economy: 1 part, from VEMO. A representative part number is VEMO V25991707.

The Heavy Duty section: 2 options from MOTORAD. MOTORAD 5340195 is listed in this group.

In the Performance grade, MOTORAD supplies 1 part: engineered beyond original-equipment specification. A representative part number is MOTORAD 2340195.

The Premium section: 3 options from MOTORAD. MOTORAD 7340195 is listed in this group.

The Standard Replacement section: 9 options from MOTORAD, CALORSTAT, GATES and 2 other brands. GATES 33849 is listed in this group.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2006 Chrysler Sebring come from 7 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO 35681.

This table covers the housings and outlets the thermostat sits in. Read more

6 Thermostat Housing / Water Outlet parts are listed for the 2006 Chrysler Sebring, from MOTORAD, DORMAN, GPD and 2 other brands. DORMAN 902863 carries the "Popular" badge.

Economy: 2 parts, from DORMAN and GPD. A representative part number is DORMAN 902863.

The Standard Replacement section: 4 options from MOTORAD, FOUR SEASONS and MOPAR. FOUR SEASONS 86179 is listed in this group.

Listed part numbers: DORMAN 902863, GPD 8241447 and FOUR SEASONS 86179, plus the other parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

9 Water Pump parts are listed for the 2006 Chrysler Sebring, from SKP, AIRTEX, FVP and 6 other brands. SKP SK1204220 carries the "Popular" badge.

Economy: 5 parts, from SKP, AIRTEX, FVP and 2 other brands. A representative part number is SKP SK1204220.

The Standard Replacement section: 4 options from GATES, DAYCO, GMB and 1 other brand. GATES 41006 is listed in this group.

Listed part numbers: SKP SK1204220, AIRTEX AW7156 and FVP US7156, plus the other parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Water Pump Gasket parts for the 2006 Chrysler Sebring come from 3 brands — MAHLE / CLEVITE, VICTOR REINZ and APEX. The "Popular" part is MAHLE / CLEVITE K32704.

Listed part numbers: MAHLE / CLEVITE K32704, APEX AWP3142 and MAHLE / CLEVITE K31502, plus the other parts above.

This table covers the Water Pump Inlet tubes. Read more

2 Water Pump Inlet Tube parts are listed for the 2006 Chrysler Sebring, from DORMAN and ULTRA-POWER.

Part numbers include DORMAN 626577, among others listed above.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Water Pump Seal / O-Ring parts are listed for the 2006 Chrysler Sebring, from FEL-PRO and APEX.

Part numbers include APEX AWP3141, FEL-PRO 35586 and FEL-PRO 35587.