2010 Chrysler Sebring Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

18 Coolant / Antifreeze parts are listed for the 2010 Chrysler Sebring, from PRESTONE, VALVOLINE, PEAK and 3 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2010 Sebring.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK and PRESTONE supply 3 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Heavy Duty section lists 1 option from VALVOLINE — rated for severe service. VALVOLINE ZXG051 is listed in this group.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 8 options from VALVOLINE, PRESTONE, ACDELCO and 2 other brands — built to original-equipment specification. ACDELCO 105027 is listed in this group.

This table covers the Coolant filler necks. Read more

This group shows a single part: FOUR SEASONS 85324.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Coolant Hose / Pipe Seal parts for the 2010 Chrysler Sebring come from 4 brands — AJUSA, FEL-PRO, ULTRA-POWER and 1 other brand.

Listed part numbers: AJUSA 16060600 and FEL-PRO ES72872, plus the other parts above.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

8 Coolant Reservoir parts for the 2010 Chrysler Sebring come from 4 brands — TECHPRO, DORMAN, GPD and 1 other brand. The "Popular" part is DORMAN 603379.

This group includes DORMAN 603379, DORMAN 603586 and GPD 2411131 and the remaining parts above.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Coolant Reservoir Cap parts for the 2010 Chrysler Sebring come from 3 brands — DORMAN, MOPAR and MOTORAD.

Part numbers include DORMAN 54201, DORMAN 54203 and MOPAR 55111074AB, among others listed above.

This table covers the Cooling Fan control modules. Read more

3 Cooling Fan Control Module parts for the 2010 Chrysler Sebring come from US MOTOR WORKS. Every part fits all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6).

Listed part numbers: US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts are listed for the 2010 Chrysler Sebring, from ACDELCO, GATES and MOTORAD. All of them fit every engine offered in the 2010 Sebring.

Listed part numbers: ACDELCO 12A01, GATES 31413 and MOTORAD 3003.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

10 Radiator parts are listed for the 2010 Chrysler Sebring, from FAMOUS BRAND, GPD, CSF and 7 other brands. CSF 3415 carries the "Popular" badge. All of them fit every engine offered in the 2010 Sebring.

Economy: 2 parts, from FAMOUS BRAND and GPD. A representative part number is FAMOUS BRAND 438144.

The Standard Replacement section: 8 options from CSF, SPECTRA PREMIUM, AGILITY and 5 other brands. CSF 3415 is listed in this group.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

12 Radiator Cap parts are listed for the 2010 Chrysler Sebring, from GATES, SKP, MOTORAD and 1 other brand. MOTORAD ST16 carries the "Popular" badge. 5 parts fit every engine; the other 7 are engine-specific.

The Locking Replacement section lists 4 options from GATES, MOTORAD and SKP — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. MOTORAD ST16 is listed in this group.

The Standard Replacement section: 8 options from SKP, GATES, CALORSTAT and 1 other brand. GATES 31528 is listed in this group.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts for the 2010 Chrysler Sebring come from 6 brands — DORMAN, GPD, FOUR SEASONS and 3 other brands. The "Popular" part is DORMAN 621029. Every part fits all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6).

The Economy section: 2 options from DORMAN and GPD. DORMAN 621029 is listed in this group.

Standard Replacement: 4 parts, from FOUR SEASONS, TYC, UAC and 1 other brand. A representative part number is FOUR SEASONS 76103.

This group includes DORMAN 621029, GPD 2811608 and FOUR SEASONS 76103 and the remaining parts above.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

One part is listed for the 2010 Chrysler Sebring — VEMO V33010024.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

20 Radiator Hose parts for the 2010 Chrysler Sebring come from 4 brands — CONTINENTAL, DAYCO, GATES and 1 other brand. The "Popular" part is ACDELCO 26668X.

This table covers the harness connectors at the Radiator Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler Sebring — CONTINENTAL 65652.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

24 Temperature Sender / Sensor parts are listed for the 2010 Chrysler Sebring, from GPD, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 9 other brands. DELPHI TS10546 carries the "Popular" badge.

Economy: 10 parts, from GPD, HOLSTEIN, UNITED MOTOR PRODUCTS and 3 other brands. A representative part number is GPD 1814495.

In the Full Service Kit grade, WALKER PRODUCTS supplies 1 part: grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. A representative part number is WALKER PRODUCTS 21191074.

The Standard Replacement section: 13 options from WELLS, DELPHI, NTK and 4 other brands. DELPHI TS10546 is listed in this group.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

36 Thermostat parts for the 2010 Chrysler Sebring come from 11 brands — MOTORAD, CALORSTAT, GATES and 8 other brands. The "Popular" part is CALORSTAT TH731077J. Economy, Heavy Duty, Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 25 parts.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2010 Chrysler Sebring, from FEL-PRO, VICTOR REINZ, MAHLE / CLEVITE and 5 other brands. ELRING 761109 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the housings and outlets the thermostat sits in. Read more

9 Thermostat Housing / Water Outlet parts for the 2010 Chrysler Sebring come from 6 brands — DORMAN, SKP, MOTORAD and 3 other brands. The "Popular" part is DORMAN 9023003.

The Economy section: 5 options from DORMAN, SKP and FAMOUS BRAND. DORMAN 9023003 is listed in this group.

Standard Replacement: 4 parts, from MOTORAD, FOUR SEASONS and GATES. A representative part number is FOUR SEASONS 86180.

Listed part numbers: DORMAN 9023003, DORMAN 9023039 and FAMOUS BRAND 85942, plus the other parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

17 Water Pump parts for the 2010 Chrysler Sebring come from 9 brands — SKP, US MOTOR WORKS, FVP and 6 other brands. The "Popular" part is SKP SK1202000.

The Economy section: 8 options from SKP, US MOTOR WORKS, FVP and 1 other brand. SKP SK1202000 is listed in this group.

Standard Replacement: 9 parts, from GATES, ACDELCO, DAYCO and 2 other brands. A representative part number is GATES 42015.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Water Pump Gasket parts are listed for the 2010 Chrysler Sebring, from FEL-PRO, VICTOR REINZ, APEX and 1 other brand. FEL-PRO 35813 carries the "Popular" badge.

This group includes FEL-PRO 35813, APEX AWP3257 and APEX AWP3195 and the remaining parts above.

This table covers the Water Pump housings. Read more

One part is listed for the 2010 Chrysler Sebring — MOPAR 4892116AC.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: FEL-PRO 35499.