2007 Chrysler 300 Engine Parts

This table covers the Auxiliary Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ENGINE PRO 151990.

This table covers the camshafts that open the valves. Read more

5 Camshaft parts are listed for the 2007 Chrysler 300, from MELLING and MOPAR. MELLING 23108 carries the "Popular" badge.

In the High Performance grade, MELLING supplies 4 parts: engineered beyond original-equipment specification. A representative part number is MELLING 23108.

The Standard Replacement section lists 1 option from MOPAR — built to original-equipment specification. MOPAR 5037379AB is listed in this group.

Listed part numbers: MELLING 23108, MELLING 23107 and MELLING 23207, plus the other parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Camshaft Bearing parts are listed for the 2007 Chrysler 300, from ENGINETECH, DURA-BOND, KING ENGINE BEARINGS and 2 other brands. ENGINETECH CC484 carries the "Popular" badge.

Part numbers include ENGINETECH CC484, ENGINETECH CC484G and DURA-BOND PD31B, among others listed above.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2007 Chrysler 300 — MELLING MEP334.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING B16450.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

15 Connecting Rod Bearing parts are listed for the 2007 Chrysler 300, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. ENGINETECH BB111J carries the "Popular" badge.

High Performance: 4 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS CR8032XPN.

The Standard Replacement section: 11 options from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. ENGINETECH BB111J is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2007 Chrysler 300, from APEX, SKP, ENGINETECH and 3 other brands. APEX ACS2094 carries the "Popular" badge.

This group includes APEX ACS2094, SKP SKCR345CSB and ENGINETECH CR370CSB and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Crankshaft Main Bearing parts for the 2007 Chrysler 300 come from 5 brands — MAHLE / CLEVITE, MOPAR, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is ENGINETECH BC115J.

The High Performance section: 3 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5840XP is listed in this group.

Standard Replacement: 8 parts, from MOPAR, MAHLE / CLEVITE, ENGINETECH and 2 other brands. A representative part number is ENGINETECH BC115J.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2007 Chrysler 300 — ARP 2445400.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 2007 Chrysler 300 — VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts for the 2007 Chrysler 300 come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 16230 and MAHLE / CLEVITE A351.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts for the 2007 Chrysler 300 come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16328 and VICTOR REINZ 711620300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts for the 2007 Chrysler 300 come from 11 brands — APEX, ELRING, NATIONAL and 8 other brands. The "Popular" part is APEX ATC2751.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2007 Chrysler 300 — ELRING 907600.

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2007 Chrysler 300 — MELLING MEP337.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2007 Chrysler 300, from ENGINETECH, FEL-PRO, ARP and 3 other brands. ENGINETECH HB228 carries the "Popular" badge.

Part numbers include ENGINETECH HB228, FEL-PRO ES72200 and ARP 2444300, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2007 Chrysler 300, from FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO 26366PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 26366PT, APEX AHG294 and MAHLE / CLEVITE 55188, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2007 Chrysler 300, from ENGINETECH, FEL-PRO, APEX and 2 other brands. ENGINETECH CR370HSA carries the "Popular" badge.

Part numbers include ENGINETECH CR370HSA, FEL-PRO HS26366PT and APEX AHS2094, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 4556020AB.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2007 Chrysler 300 come from MOPAR.

This group includes MOPAR 4609325 and MOPAR 56044359AA.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2007 Chrysler 300, from MOPAR and TECHPRO.

Part numbers include MOPAR 4806075AB, MOPAR 5030051AB and TECHPRO CH1228106.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2007 Chrysler 300, from AJUSA and APEX.

Listed part numbers: AJUSA 50547500 and APEX AFS2094.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2007 Chrysler 300 come from 4 brands — ENGINETECH, MOPAR, QUALCAST and 1 other brand.

Part numbers include ENGINETECH V1313, MOPAR 5037373AB and QUALCAST 1013207, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MELLING supplies both parts for the 2007 Chrysler 300.

Part numbers include MELLING MPE903BR and MELLING MPE902BR.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2007 Chrysler 300, from DAYCO, ATP and DORMAN. DORMAN 594324 carries the "Popular" badge.

High Performance: 1 part, from DAYCO. A representative part number is DAYCO PBU1375SS25.

The Standard Replacement section: 4 options from ATP, DORMAN and DAYCO. DORMAN 594324 is listed in this group.

Part numbers include DORMAN 594324, DAYCO PBU1375SS25 and ATP 102279, among others listed above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: MOPAR 5037510AK.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2007 Chrysler 300, from FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS96916 carries the "Popular" badge.

This group includes FEL-PRO MS96916, APEX AMS2940 and MAHLE / CLEVITE MS19674 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2007 Chrysler 300 come from 4 brands — ENGINETECH, MOPAR, QUALCAST and 1 other brand.

This group includes ENGINETECH V1314, MOPAR 5037372AB and QUALCAST 1013206 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 2007 Chrysler 300 come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. The "Popular" part is ANCHOR 3138.

This group includes ANCHOR 3138, DEA / MARMON RIDE CONTROL A5390 and ANCHOR 3315 and the remaining parts above.

This table covers the Motor Mount bolts. Read more

One part is listed for the 2007 Chrysler 300 — MOPAR 4809963AE.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 4578053AB.

This table covers the isolators in an engine mount. Read more

MOPAR supplies the 3 Motor Mount Isolator parts for the 2007 Chrysler 300.

This group includes MOPAR 4578193AE, MOPAR 4578194AE and MOPAR 5037794AC.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2007 Chrysler 300 come from ANCHOR.

Part numbers include ANCHOR 300535 and ANCHOR 300536.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

12 Oil parts for the 2007 Chrysler 300 come from 2 brands — VALVOLINE and LIQUI MOLY. The "Popular" part is VALVOLINE VV927.

The Full Synthetic section lists 8 options from VALVOLINE and LIQUI MOLY — full-synthetic oils. VALVOLINE VV927 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE supplies 2 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE 849644.

The Synthetic Blend section lists 2 options from VALVOLINE — synthetic-blend oils. VALVOLINE 797974 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2007 Chrysler 300.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

3 Oil Dipstick / Tube parts for the 2007 Chrysler 300 come from MOPAR.

This group includes MOPAR 5037660AF, MOPAR 5037739AB and MOPAR 5037660AB.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2007 Chrysler 300 come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is AGS ODP00007.

Part numbers include AGS ODP00007, DORMAN 090053 and DORMAN 090115, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2007 Chrysler 300 — ELRING 176090.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2007 Chrysler 300 come from 5 brands — GATES, CALORSTAT, MOPAR and 2 other brands. The "Popular" part is GATES 31118.

Listed part numbers: GATES 31118, CALORSTAT OC2317 and MOPAR 4591959AA, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2007 Chrysler 300 come from 15 brands — BOSCH, VARIOUS MFR, WIX and 12 other brands. The "Popular" part is MOBIL M1204A.

The Economy section lists 6 options from BOSCH, FRAM, FVP and 3 other brands — the catalog's value-priced group. BOSCH 72137WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1204A is listed in this group.

Standard Replacement: 10 parts, from MOTORCRAFT, WIX, BOSCH and 7 other brands. A representative part number is MOTORCRAFT FL300.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2007 Chrysler 300 — FEL-PRO ES73197.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2007 Chrysler 300, from AUTOTECNICA, DORMAN, MOPAR and 2 other brands. AUTOTECNICA CY1415243 carries the "Popular" badge.

This group includes AUTOTECNICA CY1415243, DORMAN 264354 and MOPAR 5037634AA and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 2007 Chrysler 300 come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO OS30795R.

This group includes FEL-PRO OS30795R, APEX AOP294 and MAHLE / CLEVITE OS32363 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

7 Oil Pump parts for the 2007 Chrysler 300 come from 2 brands — MELLING and ENGINETECH. The "Popular" part is MELLING 10342HV.

The High Performance section: 3 options from MELLING. MELLING 10342HV is listed in this group.

The High Volume / Pressure section lists 2 options from ENGINETECH and MELLING — grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. ENGINETECH EP342HV is listed in this group.

Standard Replacement: 2 parts, from MELLING and ENGINETECH. A representative part number is MELLING M362.

Listed part numbers: MELLING 10342HV, MELLING 10342 and MELLING 10342BR, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2007 Chrysler 300 — ELRING 278327.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 53020861.

This table covers the Oil Temperature senders. Read more

2 Oil Temperature Sender parts are listed for the 2007 Chrysler 300, from UNITED MOTOR PRODUCTS and STANDARD MOTOR PRODUCTS.

Economy: 1 part, from UNITED MOTOR PRODUCTS. A representative part number is UNITED MOTOR PRODUCTS CTS342.

The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS TS632 is listed in this group.

Part numbers include UNITED MOTOR PRODUCTS CTS342 and STANDARD MOTOR PRODUCTS TS632.