2007 Chrysler 300 Automatic Transmission Parts

This table covers the control units that command automatic-transmission shifts. Read more

This group shows a single part: MOPAR 5150186AH.

This table covers the transmission or transfer-case housings. Read more

One part is listed for the 2007 Chrysler 300 — MOPAR 52108099AB.

This table covers the Case covers. Read more

This group shows a single part: MOPAR 4591910AA.

This table covers the vents on a transmission or axle housing. Read more

This group shows a single part: MOPAR 5170944AC.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

One part is listed for the 2007 Chrysler 300 — RAYBESTOS POWERTRAIN RCP96234.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

6 Conductor Plate parts for the 2007 Chrysler 300 come from 5 brands — SKP, DORMAN, ULTRA-POWER and 2 other brands. The "Popular" part is SKP SK917679.

The Economy section lists 5 options from SKP, DORMAN, ULTRA-POWER and 1 other brand — the catalog's value-priced group. SKP SK917679 is listed in this group.

In the Standard Replacement grade, NTK supplies 1 part: built to original-equipment specification. A representative part number is NTK AU0204.

Part numbers include SKP SK917679, SKP SK917678 and DORMAN 917678, among others listed above.

This table covers the Dipstick / Fluid Filler tubes. Read more

2 Dipstick / Fluid Filler Tube parts are listed for the 2007 Chrysler 300, from DORMAN and MOPAR.

Listed part numbers: DORMAN 917327 and MOPAR 5037793AC.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Extension Housing Seal parts for the 2007 Chrysler 300 come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710940 and WJB / INMOTION PARTS WS710940.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

14 Filter parts are listed for the 2007 Chrysler 300, from VAICO, ATP, ELRING and 7 other brands. ACDELCO TF357 carries the "Popular" badge.

The Basic Kit (Without Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V302254BEK is listed in this group.

Economy: 5 parts, from ELRING, ATP, PA CARGO and 1 other brand. A representative part number is ATP TF217.

The Standard Replacement section: 8 options from MOPAR, ACDELCO, MANN and 4 other brands. ACDELCO TF357 is listed in this group.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts for the 2007 Chrysler 300 come from 2 brands — ATP and PIONEER.

Part numbers include ATP Z644 and PIONEER FRA557.

This table covers the Flexplate Mounting bolts. Read more

This group shows a single part: DORMAN 14131.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Fluid Cooler Line / Hose parts are listed for the 2007 Chrysler 300, from DORMAN, MOPAR and SUNSONG.

Listed part numbers: DORMAN 624187, MOPAR 4598134AC and SUNSONG 5802159.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: DORMAN 800723.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts for the 2007 Chrysler 300 come from 4 brands — MOPAR, SKP, SPECTRA PREMIUM and 1 other brand.

Listed part numbers: MOPAR 52108327AB, SKP SK265866 and SPECTRA PREMIUM TP0866, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 2007 Chrysler 300, from ÜRO PARTS, ATP, ELRING and 2 other brands. ÜRO PARTS 1402710080 carries the "Popular" badge.

Listed part numbers: ÜRO PARTS 1402710080, ATP MG4 and ELRING 295540, plus the other parts above.

This table covers the Fluid Pan magnets. Read more

This group shows a single part: MOPAR 68207788AA.

This table covers the Fluid pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS PS751.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

MOPAR supplies the 3 Fluid Pump parts for the 2007 Chrysler 300.

Listed part numbers: MOPAR 5080070AB, MOPAR R8087860AA and MOPAR RL087860AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts for the 2007 Chrysler 300 come from 5 brands — NATIONAL, BCA, JAPANESE OE and 2 other brands. The "Popular" part is NATIONAL 710608.

Listed part numbers: NATIONAL 710608, BCA NS710608 and JAPANESE OE 91212PNC004, plus the other parts above.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

One part is listed for the 2007 Chrysler 300 — MOPAR 5149008AA.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

This group shows a single part: VICTOR REINZ 711917000.

This table covers the Input shafts. Read more

MOPAR supplies both parts for the 2007 Chrysler 300.

Listed part numbers: MOPAR 5143679AB and MOPAR 52108044AA.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 2007 Chrysler 300 come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711035 and WJB / INMOTION PARTS WS711035.

This table covers the O-rings and seals at this joint. Read more

This group shows a single part: ELRING 428390.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Output Shaft Bearing parts for the 2007 Chrysler 300 come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is WJB / INMOTION PARTS RB6206.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6206 is listed in this group.

Standard Replacement: 4 parts, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. A representative part number is BCA NB206.

This group includes WJB / INMOTION PARTS RB6206, BCA NB206 and NATIONAL 206 and the remaining parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2007 Chrysler 300 — SKF 16521.

This table covers the parking pawls that lock the transmission in Park. Read more

One part is listed for the 2007 Chrysler 300 — MOPAR 52108154AA.

This table covers the Piston kits. Read more

2 Piston Kit parts for the 2007 Chrysler 300 come from PA CARGO.

Listed part numbers: PA CARGO 92912 and PA CARGO 61837A.

This table covers the Plug adapters. Read more

2 Plug Adapter parts for the 2007 Chrysler 300 come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

Listed part numbers: DORMAN 917505 and STANDARD MOTOR PRODUCTS TCPA01.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2007 Chrysler 300 — WELLS 2N1281.

This table covers the rebuild kits for this assembly. Read more

3 Rebuild Kit parts for the 2007 Chrysler 300 come from 2 brands — TRANSTEC and MOPAR.

Listed part numbers: MOPAR 5139580AK, TRANSTEC 81000217 and TRANSTEC 81000417.

This table covers the wear sleeves used to restore a grooved seal surface. Read more

2 Repair Sleeve parts for the 2007 Chrysler 300 come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SR3502 and SKF 99182.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

4 Shift Cable parts for the 2007 Chrysler 300 come from MOPAR.

This group includes MOPAR 4578072AD, MOPAR 4578073AD and MOPAR 4578074AE and the remaining parts above.

This table covers the Shift Improvement kits. Read more

One part is listed for the 2007 Chrysler 300 — TRANSGO SK7226A.

This table covers the Shift Interlock control modules. Read more

MOPAR supplies the 4 Shift Interlock Control Module parts for the 2007 Chrysler 300.

Listed part numbers: MOPAR 68091341AA, MOPAR 68091342AA and MOPAR 68091343AA, plus the other parts above.

This table covers the Shift Interlock latches. Typical signs include a door that will not stay closed, or a latch that will not release. Lubricate and align the striker before replacing a latch that still clicks. Read more

2 Shift Interlock Latch parts for the 2007 Chrysler 300 come from 2 brands — DORMAN and SKP.

This group includes DORMAN 924706 and SKP SK924706.

This table covers the Shift Interlock solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2007 Chrysler 300 — STANDARD MOTOR PRODUCTS SIA5.

This table covers the Shift Linkage bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DORMAN 14110.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Shift Shaft Seal parts for the 2007 Chrysler 300 come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SS2178, SCHAEFFLER SS6528 and SKF 4692.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

6 Shift Solenoid parts for the 2007 Chrysler 300 come from 4 brands — STANDARD MOTOR PRODUCTS, MOPAR, WELLS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TCS208.

In the Single Solenoid grade, STANDARD MOTOR PRODUCTS, MOPAR and WELLS supply 4 parts: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TCS208.

In the Solenoid Pack / Kit grade, STANDARD MOTOR PRODUCTS supplies 1 part: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TCS211.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include STANDARD MOTOR PRODUCTS TCS208, MOPAR 52108314AB and STANDARD MOTOR PRODUCTS TCS88, among others listed above.

This table covers the Sun gears. Read more

This group shows a single part: MOPAR 52108078AA.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2007 Chrysler 300 — TC REMANUFACTURING MC22.

This table covers the Torque Converter bolts. Read more

This group shows a single part: ARP 1477301.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts are listed for the 2007 Chrysler 300, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS TCS331 and WELLS 2N1257.

This table covers the Torque Converter housings. Read more

This group shows a single part: MOPAR 52107911AA.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN 710608.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

19 Transmission Fluid parts are listed for the 2007 Chrysler 300, from PENTOSIN, LUCAS OIL, VALVOLINE and 5 other brands. VALVOLINE 822348 carries the "Popular" badge.

In the ATF +4 grade, VALVOLINE and PENTOSIN supply 5 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 822348.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, LIQUI MOLY, LUCAS OIL, MOBIL and 1 other brand supply 7 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the ZF Fluid grade, PENTOSIN and ZF supply 4 parts: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058106.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 8 Transmission Fluid Additive parts for the 2007 Chrysler 300. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2007 Chrysler 300 come from 5 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 3163.

The Economy section: 1 option from SKP. SKP SKM3163 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 3163.

Listed part numbers: ANCHOR 3163, SKP SKM3163 and DEA / MARMON RIDE CONTROL A5388, plus the other parts above.

This table covers the Transmission service kits. Read more

2 Transmission Service Kit parts for the 2007 Chrysler 300 come from VAICO.

In the Expert Kit (Basic Kit & Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254.

The Expert Kit + (Expert Kit and Extra Oil for Rinsing) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. VAICO V302254XXL is listed in this group.

Listed part numbers: VAICO V302254 and VAICO V302254XXL.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

MOPAR supplies the 3 Valve Body parts for the 2007 Chrysler 300.

Part numbers include MOPAR R2108213AC, MOPAR 52108213AA and MOPAR 52108213AB.