48 Ignition parts are listed for the 2008 Chrysler Cirrus, in 6 part types, covering both the 2.4L L4 and the 3.5L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 Chrysler Cirrus, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (24 parts), Camshaft Position Sensor (10 parts) and Spark Plug / Ignition Coil Boot (6 parts). The other 3 part types cover the remaining 8 parts.
The 2008 Chrysler Cirrus was sold with both the 2.4L L4 and the 3.5L V6. 7 parts fit every engine; the other 41 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2008 Chrysler Cirrus ignition parts are STANDARD MOTOR PRODUCTS (14 parts), WALKER PRODUCTS (9 parts) and WELLS (5 parts), plus 10 more brands. Quality grades include Economy, Standard Replacement and Premium.
9 parts on this 2008 Chrysler Cirrus page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including STANDARD MOTOR PRODUCTS PC748T (Camshaft Position Sensor) and NTK EH0413 (Crankshaft Position Sensor). Click any part number to see every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 2.4L L4 | PC748T | 🇲🇽 MX | T-Series | View on Amazon |
| HOLSTEIN Fits: 2.4L L4 | 2CAM0368 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 2.4L L4 | PC748 | 🇲🇽 MX | View on Amazon | |
| NTK Fits: 2.4L L4 | EC0339 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 2.4L L4 | 2351279 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS Fits: 2.4L L4 | 5S8954 | 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NTK Fits: 3.5L V6 | EC0338 | 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | PC787 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 3.5L V6 | 2351287 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS Fits: 3.5L V6 | 5S8953 | 🇲🇽 MX | Connector Shape: Oblong | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
10 Camshaft Position Sensor parts are listed for the 2008 Chrysler Cirrus, from STANDARD MOTOR PRODUCTS, NTK, WALKER PRODUCTS and 2 other brands. STANDARD MOTOR PRODUCTS PC748T carries the "Popular" badge.
In the Economy grade, STANDARD MOTOR PRODUCTS and HOLSTEIN supply 2 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS PC748T.
The Standard Replacement section lists 4 options from STANDARD MOTOR PRODUCTS, NTK, WALKER PRODUCTS and 1 other brand — built to original-equipment specification. STANDARD MOTOR PRODUCTS PC748 is listed in this group.
4 ungrouped parts are not assigned to a grade, with the same engine-level match.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: all 2008 Cirrus engines | CRK329 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NTK Popular Fits: all 2008 Cirrus engines | EH0413 | 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: all 2008 Cirrus engines | PC757 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: all 2008 Cirrus engines | 2351282 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS Fits: all 2008 Cirrus engines | 5S8994 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
5 Crankshaft Position Sensor parts are listed for the 2008 Chrysler Cirrus, from UNITED MOTOR PRODUCTS, NTK, STANDARD MOTOR PRODUCTS and 2 other brands. NTK EH0413 carries the "Popular" badge. All of them fit every engine offered in the 2008 Cirrus.
Economy: 1 part, from UNITED MOTOR PRODUCTS. A representative part number is UNITED MOTOR PRODUCTS CRK329.
The Standard Replacement section: 4 options from NTK, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand. NTK EH0413 is listed in this group.
Part numbers include NTK EH0413, UNITED MOTOR PRODUCTS CRK329 and STANDARD MOTOR PRODUCTS PC757, among others listed above.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 2.4L L4 | SKIC505 | 🇲🇽 MX | View on Amazon | |
| SKP Popular Fits: 3.5L V6 | SKIC127 | 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Popular Fits: 2.4L L4 | UF557TK4 | 🇲🇽 MX | T-Series | View on Amazon |
| FVP Fits: 2.4L L4 | UF557F | 🇲🇽 MX | View on Amazon | |
| FVP Fits: 3.5L V6 | UF502F | 🇲🇽 MX | View on Amazon | |
| HOLSTEIN Fits: 2.4L L4 | 2IGC0168 | 🇲🇽 MX | View on Amazon | |
| HOLSTEIN Fits: 3.5L V6 | 2IGC0343 | 🇲🇽 MX | View on Amazon | |
| SPECTRA PREMIUM Fits: 2.4L L4 | C695 | 🇲🇽 MX | Ignition Coil Mounts to Cylinder Head | View on Amazon |
| SPECTRA PREMIUM Fits: 3.5L V6 | C739 | 🇲🇽 MX | Ignition Coil Mounts to Cylinder Head | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | UF557T | 🇲🇽 MX | T-Series | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | UF502T | 🇲🇽 MX | T-Series | View on Amazon |
| WAI GLOBAL Fits: 2.4L L4 | CUF502 | 🇲🇽 MX | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ASTEMO / HITACHI Fits: 2.4L L4 | IGC0170 | 🇲🇽 MX | Coil Type: Individual | View on Amazon |
| ASTEMO / HITACHI Fits: 3.5L V6 | IGC0162 | 🇲🇽 MX | Coil Type: Individual | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | UF557 | 🇲🇽 MX | Blue Streak | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | UF502 | 🇲🇽 MX | Blue Streak | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS Popular Fits: 3.5L V6 | 92840906 | 🇲🇽 MX | Coil Set | View on Amazon |
| WELLS Popular Fits: 2.4L L4 | 5C1644 | 🇲🇽 MX | For Coil Boot Use 4C2049 | View on Amazon |
| WELLS Popular Fits: 3.5L V6 | 5C1565 | 🇲🇽 MX | Requires External Resistor: YES | View on Amazon |
| UNITED MOTOR PRODUCTS Fits: 2.4L L4 | COP109 | 🇲🇽 MX | View on Amazon | |
| UNITED MOTOR PRODUCTS Fits: 3.5L V6 | COP104 | 🇲🇽 MX | Color: Gray | View on Amazon |
| WALKER PRODUCTS Fits: 2.4L L4 | 9212108 | 🇲🇽 MX | Single Coil | View on Amazon |
| WALKER PRODUCTS Fits: 2.4L L4 | 92840954 | 🇲🇽 MX | Coil Set | View on Amazon |
| WALKER PRODUCTS Fits: 3.5L V6 | 9212092 | 🇲🇽 MX | Single Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
24 Ignition Coil parts are listed for the 2008 Chrysler Cirrus, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, SKP and 7 other brands. SKP SKIC505 carries the "Popular" badge.
Economy: 12 parts, from STANDARD MOTOR PRODUCTS, SKP, FVP and 3 other brands. A representative part number is SKP SKIC505.
The Premium section lists 4 options from ASTEMO / HITACHI and STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. ASTEMO / HITACHI IGC0170 is listed in this group.
The Standard Replacement section: 8 options from WALKER PRODUCTS, WELLS and UNITED MOTOR PRODUCTS. WALKER PRODUCTS 92840906 is listed in this group.
Ignition Lock Cylinder
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 Cirrus engines | 924721 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2008 Cirrus engines | US537L | 🇲🇽 MX | View on Amazon |
This table covers the lock cylinders in the ignition switch.
2 Ignition Lock Cylinder parts are listed for the 2008 Chrysler Cirrus, from DORMAN and STANDARD MOTOR PRODUCTS. All of them fit every engine offered in the 2008 Cirrus.
Economy: 1 part, from DORMAN. A representative part number is DORMAN 924721.
The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS US537L is listed in this group.
This group includes DORMAN 924721 and STANDARD MOTOR PRODUCTS US537L.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.4L L4 | 41806 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
This group shows a single part: ACDELCO 41806.
Spark Plug / Ignition Coil Boot
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | 20491 | 🇲🇽 MX | Federal Wire | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | 20451 | 🇲🇽 MX | Federal Wire | View on Amazon |
| WALKER PRODUCTS Fits: 2.4L L4 | 900P2080 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 3.5L V6 | 900P2068 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.4L L4 | SPP157E | 🇲🇽 MX | Content: Includes Valve Cover Flange, Boot Tip, and Spring | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | SPP124E | 🇲🇽 MX | Includes Valve Cover Flange, Boot Tip, and Spring | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
6 Spark Plug / Ignition Coil Boot parts are listed for the 2008 Chrysler Cirrus, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.
Economy: 4 parts, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 20491.
The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS SPP157E is listed in this group.
This group includes STANDARD MOTOR PRODUCTS 20491, STANDARD MOTOR PRODUCTS 20451 and WALKER PRODUCTS 900P2080 and the remaining parts above.
Buying Ignition Parts for a 2008 Chrysler Cirrus
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Camshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2008 Chrysler Cirrus?
Our catalog currently lists 48 ignition parts for the 2008 Chrysler Cirrus across 6 subcategories and 13 brands, covering both the 2.4L L4 and the 3.5L V6. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2008 Chrysler Cirrus engines?
Some do. 7 parts fit every engine; the other 41 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2008 Chrysler Cirrus?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2008 Chrysler Cirrus?
Notes on this page include pre-set gaps of 0.043" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Chrysler Cirrus was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Chrysler Cirrus?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Chrysler Cirrus
Ignition Parts for Other Chrysler Cirrus Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.