2008 Chrysler Crossfire Automatic Transmission Parts

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Clutch Plate parts for the 2008 Chrysler Crossfire come from MOPAR.

Part numbers include MOPAR 52108315AA and MOPAR 68039901AA.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

6 Conductor Plate parts for the 2008 Chrysler Crossfire come from 5 brands — SKP, DORMAN, ULTRA-POWER and 2 other brands. The "Popular" part is SKP SK917678.

The Economy section lists 5 options from SKP, DORMAN, ULTRA-POWER and 1 other brand — the catalog's value-priced group. SKP SK917678 is listed in this group.

In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS TCP01.

This group includes SKP SK917678, DORMAN 917678 and SKP SK917679 and the remaining parts above.

This table covers the Dipstick / Fluid Filler tubes. Read more

One part is listed for the 2008 Chrysler Crossfire — MOPAR 5098738AA.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 5073946AA.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Extension Housing Seal parts for the 2008 Chrysler Crossfire come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS224250, NATIONAL 224250 and WJB / INMOTION PARTS WS224250.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

11 Filter parts are listed for the 2008 Chrysler Crossfire, from VAICO, ELRING, MOPAR and 5 other brands. ACDELCO TF357 carries the "Popular" badge.

The Basic Kit (Without Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V302254BEK is listed in this group.

Economy: 3 parts, from ELRING and VARIOUS MFR. A representative part number is ELRING 444960.

The Standard Replacement section: 7 options from MOPAR, ACDELCO, MANN and 3 other brands. ACDELCO TF357 is listed in this group.

This table covers the pans that hold automatic-transmission fluid. Read more

3 Fluid Pan parts for the 2008 Chrysler Crossfire come from 3 brands — DORMAN, MOPAR and REIN.

Part numbers include DORMAN 265866, MOPAR 52108326AA and REIN ESK0135.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 2008 Chrysler Crossfire, from FEL-PRO, ELRING, MAHLE / CLEVITE and 2 other brands. FEL-PRO TOS18764 carries the "Popular" badge.

Listed part numbers: FEL-PRO TOS18764, ELRING 295540 and MAHLE / CLEVITE W32819, plus the other parts above.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

MOPAR supplies both parts for the 2008 Chrysler Crossfire.

Part numbers include MOPAR 5080070AB and MOPAR RL087860AA.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2008 Chrysler Crossfire — MOPAR 52107900AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts for the 2008 Chrysler Crossfire come from 4 brands — JAPANESE OE, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 710608.

This group includes NATIONAL 710608, BCA NS710608 and JAPANESE OE 91212PNC004 and the remaining parts above.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

This group shows a single part: VICTOR REINZ 711917000.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 2008 Chrysler Crossfire come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 711035 and WJB / INMOTION PARTS WS711035.

This table covers the O-rings and seals at this joint. Read more

This group shows a single part: ELRING 428390.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Output Shaft Bearing parts for the 2008 Chrysler Crossfire come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6206 is listed in this group.

Standard Replacement: 2 parts, from BCA and NATIONAL. A representative part number is BCA NB206.

Part numbers include WJB / INMOTION PARTS RB6206, BCA NB206 and NATIONAL 206.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts are listed for the 2008 Chrysler Crossfire, from SKF and TIMKEN.

Part numbers include SKF 16521 and TIMKEN 224250.

This table covers the Plug adapters. Read more

3 Plug Adapter parts for the 2008 Chrysler Crossfire come from 3 brands — DORMAN, ROSTRA and STANDARD MOTOR PRODUCTS.

This group includes DORMAN 917505, ROSTRA 3500175 and STANDARD MOTOR PRODUCTS TCPA01.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2008 Chrysler Crossfire — WELLS 2N1281.

This table covers the rebuild kits for this assembly. Read more

This group shows a single part: TRANSTEC 81000217.

This table covers the Shift Improvement kits. Read more

One part is listed for the 2008 Chrysler Crossfire — TRANSGO SK7226A.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

6 Shift Solenoid parts for the 2008 Chrysler Crossfire come from 3 brands — MOPAR, STANDARD MOTOR PRODUCTS and WELLS. The "Popular" part is STANDARD MOTOR PRODUCTS TCS209.

This group includes STANDARD MOTOR PRODUCTS TCS209, STANDARD MOTOR PRODUCTS TCS208 and MOPAR 52108314AB and the remaining parts above.

This table covers the Sun gears. Read more

2 Sun Gear parts for the 2008 Chrysler Crossfire come from MOPAR.

Part numbers include MOPAR 5098746AA and MOPAR 5101050AA.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts are listed for the 2008 Chrysler Crossfire, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TCS331 and WELLS 2N1257.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts for the 2008 Chrysler Crossfire come from 2 brands — ACDELCO and SCHAEFFLER.

Listed part numbers: ACDELCO 710608 and SCHAEFFLER SS2749.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

28 Transmission Fluid parts are listed for the 2008 Chrysler Crossfire, from VALVOLINE, LIQUI MOLY, PENTOSIN and 4 other brands. ACDELCO 109243 carries the "Popular" badge. ATF 134, Dexron, Mercon, Multi-Vehicle and Type III (H) are all represented, and Multi-Vehicle alone accounts for 17 parts.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 6 Transmission Fluid Additive parts for the 2008 Chrysler Crossfire. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2008 Chrysler Crossfire come from 5 brands — ÜRO PARTS, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ÜRO PARTS 2122400418.

The Economy section: 1 option from ÜRO PARTS. ÜRO PARTS 2122400418 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 9268.

Listed part numbers: ÜRO PARTS 2122400418, ANCHOR 9268 and DEA / MARMON RIDE CONTROL A7098, plus the other parts above.

This table covers the Transmission service kits. Read more

3 Transmission Service Kit parts for the 2008 Chrysler Crossfire come from 2 brands — VAICO and REIN.

In the Expert Kit (Basic Kit & Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V302254.

The Expert Kit + (Expert Kit and Extra Oil for Rinsing) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. VAICO V302254XXL is listed in this group.

Standard Replacement: 1 part, from REIN. A representative part number is REIN TSK0019.

Listed part numbers: VAICO V302254, VAICO V302254XXL and REIN TSK0019.