2020 Chrysler Voyager Engine Parts

This table covers the camshafts that open the valves. Read more

6 Camshaft parts for the 2020 Chrysler Voyager come from 2 brands — MELLING and ENGINETECH. The "Popular" part is MELLING MC1445.

This group includes MELLING MC1445, MELLING CKMC1443 and ENGINETECH ES1419 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2020 Chrysler Voyager come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE CS55401 and VICTOR REINZ 081022201.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Chrysler Voyager — MAHLE / CLEVITE JV1758.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 2020 Chrysler Voyager come from 3 brands — FEL-PRO, MAHLE / CLEVITE and MOPAR.

This group includes FEL-PRO ES72467, MAHLE / CLEVITE GS33681 and MOPAR 6509564AA.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2020 Chrysler Voyager come from 2 brands — MAHLE / CLEVITE and FEL-PRO. The "Popular" part is MAHLE / CLEVITE 55402.

Part numbers include MAHLE / CLEVITE 55402, FEL-PRO 26782PT and FEL-PRO 26785PT, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2020 Chrysler Voyager come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE HS55401 and VICTOR REINZ 021135801.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2020 Chrysler Voyager.

This group includes KAT'S HEATERS 11814 and KAT'S HEATERS 28814.

This table covers the Engine covers. Read more

4 Engine Cover parts for the 2020 Chrysler Voyager come from 2 brands — TECHPRO and VARIOUS MFR.

This group includes TECHPRO CH1228142, TECHPRO CH1228141 and TECHPRO CH1228176 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2020 Chrysler Voyager, from MELLING and SBI.

Part numbers include MELLING V3462 and SBI 13462.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2020 Chrysler Voyager come from 5 brands — SKP, ATP, DAYCO and 2 other brands.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594405 is listed in this group.

In the Standard Replacement grade, ATP, DAYCO, DORMAN and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ATP 102343.

Part numbers include SKP SK594405, ATP 102343 and DAYCO PB1707N, among others listed above.

This table covers the Intake Manifold bolts. Read more

This group shows a single part: DORMAN 32128.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2020 Chrysler Voyager come from 4 brands — MAHLE / CLEVITE, FEL-PRO, ULTRA-POWER and 1 other brand. The "Popular" part is FEL-PRO MS97204.

Listed part numbers: FEL-PRO MS97204, MAHLE / CLEVITE MS20457 and MAHLE / CLEVITE MIS20457, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts are listed for the 2020 Chrysler Voyager, from FEL-PRO, MAHLE / CLEVITE and ULTRA-POWER.

Listed part numbers: FEL-PRO MS97205 and MAHLE / CLEVITE MS20456, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2020 Chrysler Voyager, from MELLING, QUALCAST and SBI.

Listed part numbers: MELLING V3461, QUALCAST 1013461 and SBI 13461.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts are listed for the 2020 Chrysler Voyager, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 3503 carries the "Popular" badge.

Economy: 2 parts, from SKP. A representative part number is SKP SKM3503.

The Standard Replacement section: 5 options from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR. ANCHOR 3503 is listed in this group.

Part numbers include ANCHOR 3503, SKP SKM3503 and SKP SKM3519, among others listed above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2020 Chrysler Voyager — ANCHOR 300516.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

27 Oil parts are listed for the 2020 Chrysler Voyager, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. LIQUI MOLY 2208 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 20 parts from VALVOLINE, LIQUI MOLY, PENTOSIN and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2020 Chrysler Voyager, from HOLSTEIN and STANDARD MOTOR PRODUCTS.

This group includes HOLSTEIN 2OFH0003 and STANDARD MOTOR PRODUCTS OFH111.

This table covers the seals at the Oil Cooler Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Chrysler Voyager — FEL-PRO ES73248.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE GS33753.

This table covers the Oil Cooler Mounting kits. Read more

This group shows a single part: VICTOR REINZ 131001101.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 2020 Chrysler Voyager, from DORMAN, AGS and SKP. DORMAN 090053 carries the "Popular" badge.

Listed part numbers: DORMAN 090053, AGS ODP00007 and AGS ODP00012, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO 72907.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2020 Chrysler Voyager, from GATES and MOTORAD.

Listed part numbers: GATES 31299 and MOTORAD MO205.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2020 Chrysler Voyager, from WIX, PRO-TEC, BOSCH and 13 other brands. PRO-TEC PXL10010 carries the "Popular" badge.

Economy: 8 parts, from PRO-TEC, BOSCH, CHAMP / LUBER-FINER and 5 other brands. A representative part number is PRO-TEC PXL10010.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX WL10010XP.

The Standard Replacement section: 7 options from HENGST, WIX, ACDELCO and 4 other brands. HENGST E721HD271 is listed in this group.

This table covers the Oil Filter covers. Read more

5 Oil Filter Cover parts for the 2020 Chrysler Voyager come from 5 brands — DORMAN, MOTORAD, STANDARD MOTOR PRODUCTS and 2 other brands. The "Popular" part is DORMAN 917190.

Part numbers include DORMAN 917190, MOTORAD MO327 and STANDARD MOTOR PRODUCTS OFC101, among others listed above.

This table covers the Oil Filter housings. Read more

5 Oil Filter Housing parts for the 2020 Chrysler Voyager come from 5 brands — DORMAN, AUTOTECNICA, FEL-PRO and 2 other brands. The "Popular" part is DORMAN 926959.

This group includes DORMAN 926959, AUTOTECNICA CY1419389 and FEL-PRO OFHA1001 and the remaining parts above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Chrysler Voyager — DORMAN 926959G.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Chrysler Voyager — VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2020 Chrysler Voyager, from ENGINETECH, MELLING and SEALED POWER.

This group includes ENGINETECH EP588, MELLING M588 and SEALED POWER 22443710.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts for the 2020 Chrysler Voyager come from 3 brands — CLOYES, MELLING and S.A. GEAR.

Part numbers include CLOYES C990, MELLING 1072 and S.A. GEAR C1137.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts are listed for the 2020 Chrysler Voyager, from CLOYES, MELLING and S.A. GEAR.

Part numbers include CLOYES 96150, MELLING BT7034 and S.A. GEAR 91274.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts for the 2020 Chrysler Voyager come from 2 brands — MELLING and SEALED POWER.

Listed part numbers: MELLING 426S and SEALED POWER 22415131.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts for the 2020 Chrysler Voyager come from 3 brands — CLOYES, MELLING and S.A. GEAR.

This group includes CLOYES S1177, MELLING S1254 and S.A. GEAR S1412.

This table covers the Oil Temperature senders. Read more

2 Oil Temperature Sender parts for the 2020 Chrysler Voyager come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TX263 and WELLS 5S17175.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2020 Chrysler Voyager come from 2 brands — ENGINETECH and SILV-O-LITE.

This group includes ENGINETECH K11176 and SILV-O-LITE SL10093K1.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2020 Chrysler Voyager come from HASTINGS MANUFACTURING.

This group includes HASTINGS MANUFACTURING 2C5291 and HASTINGS MANUFACTURING 2C5291S.

This table covers the rocker arms that transfer cam motion to the valves. Read more

3 Rocker Arm parts are listed for the 2020 Chrysler Voyager, from ENGINETECH, MELLING and SBI.

Listed part numbers: ENGINETECH ER1332, MELLING MR1361 and SBI 1801332.

This table covers the timing chains that keep the cams in time with the crank. Read more

6 Timing Chain parts for the 2020 Chrysler Voyager come from 3 brands — MELLING, CLOYES and S.A. GEAR. The "Popular" part is MELLING 1080.

Part numbers include MELLING 1080, MELLING 1071 and CLOYES C988, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts are listed for the 2020 Chrysler Voyager, from MELLING, S.A. GEAR and CLOYES. MELLING 31080SX carries the "Popular" badge.

Economy: 3 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76367S.

The Standard Replacement section: 6 options from MELLING and CLOYES. MELLING 31080SX is listed in this group.

Listed part numbers: MELLING 31080SX, S.A. GEAR 76367S and S.A. GEAR 76367, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

16 Timing Chain Guide / Damper parts for the 2020 Chrysler Voyager come from 4 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand. The "Popular" part is CLOYES 95754.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

12 Timing Chain Tensioner parts are listed for the 2020 Chrysler Voyager, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand. CLOYES 95751 carries the "Popular" badge.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts are listed for the 2020 Chrysler Voyager, from ELRING and MAHLE / CLEVITE.

This group includes ELRING 586380 and MAHLE / CLEVITE JV5279.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Chrysler Voyager — MAHLE / CLEVITE 67972.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2020 Chrysler Voyager, from CLOYES, MELLING and S.A. GEAR.

This group includes CLOYES S1179, MELLING S1255 and S.A. GEAR S1413.

This table covers the Timing Idler sprockets. Read more

2 Timing Idler Sprocket parts for the 2020 Chrysler Voyager come from 2 brands — CLOYES and MELLING.

This group includes CLOYES S1176 and MELLING S1253.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts for the 2020 Chrysler Voyager come from 4 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand.

The Economy section: 1 option from SKP. SKP SKM3502 is listed in this group.

Standard Replacement: 3 parts, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. A representative part number is ANCHOR 3502.

This group includes SKP SKM3502, ANCHOR 3502 and DEA / MARMON RIDE CONTROL A20070 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts are listed for the 2020 Chrysler Voyager, from FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO VS50960R and MAHLE / CLEVITE VS50919.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts are listed for the 2020 Chrysler Voyager, from ENGINETECH, QUALCAST and SBI.

Part numbers include ENGINETECH GD3282, QUALCAST 303182 and SBI 1403182.

This table covers the Valve seats. Read more

2 Valve Seat parts for the 2020 Chrysler Voyager come from SBI.

Listed part numbers: SBI SB125066PM and SBI SB162567PM.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Valve Spring parts for the 2020 Chrysler Voyager come from 3 brands — MELLING, QUALCAST and SBI.

Part numbers include MELLING VS1615, QUALCAST 326656 and SBI 1601656.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR719.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts for the 2020 Chrysler Voyager come from 4 brands — ENGINETECH, MELLING, QUALCAST and 1 other brand.

This group includes ENGINETECH EPF1082, MELLING VL1120 and QUALCAST 3403722 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts are listed for the 2020 Chrysler Voyager, from FEL-PRO, MAHLE / CLEVITE, ENGINETECH and 2 other brands. FEL-PRO SS710743 carries the "Popular" badge.

Part numbers include FEL-PRO SS710743, MAHLE / CLEVITE SS46057 and ENGINETECH S654V, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

14 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2020 Chrysler Voyager, from STANDARD MOTOR PRODUCTS, DORMAN, WELLS and 4 other brands. DORMAN 916537 carries the "Popular" badge.

Economy: 6 parts, from DORMAN, WELLS and HOLSTEIN. A representative part number is DORMAN 916537.

The Standard Replacement section: 8 options from STANDARD MOTOR PRODUCTS, S.A. GEAR, CLOYES and 1 other brand. STANDARD MOTOR PRODUCTS VVT750 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts are listed for the 2020 Chrysler Voyager, from S.A. GEAR, STANDARD MOTOR PRODUCTS, ENGINETECH and 1 other brand. STANDARD MOTOR PRODUCTS VVT714 carries the "Popular" badge.

Listed part numbers: STANDARD MOTOR PRODUCTS VVT714, ENGINETECH ECP8434 and S.A. GEAR S1545, plus the other parts above.