2025 Chrysler Voyager Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2025 Chrysler Voyager — MAHLE / CLEVITE CS55401.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE JV1758.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2025 Chrysler Voyager — MAHLE / CLEVITE GS33681.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2025 Chrysler Voyager, from FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 26782PT, FEL-PRO 26785PT and MAHLE / CLEVITE 55520, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2025 Chrysler Voyager — MAHLE / CLEVITE HS55401.

This table covers the Engine covers. Read more

4 Engine Cover parts are listed for the 2025 Chrysler Voyager, from TECHPRO and VARIOUS MFR.

This group includes TECHPRO CH1228142, TECHPRO CH1228141 and TECHPRO CH1228176 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2025 Chrysler Voyager come from 2 brands — MELLING and SBI.

This group includes MELLING V3462 and SBI 13462.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2025 Chrysler Voyager — DAYCO PB1707N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Chrysler Voyager — MAHLE / CLEVITE MS20457.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2025 Chrysler Voyager come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO MS97205 and MAHLE / CLEVITE MS20456.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2025 Chrysler Voyager come from 3 brands — MELLING, QUALCAST and SBI.

Part numbers include MELLING V3461, QUALCAST 1013461 and SBI 13461.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2025 Chrysler Voyager come from 2 brands — SKP and DEA / MARMON RIDE CONTROL.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM3503 is listed in this group.

In the Standard Replacement grade, DEA / MARMON RIDE CONTROL supplies 1 part: built to original-equipment specification. A representative part number is DEA / MARMON RIDE CONTROL A20027.

Listed part numbers: SKP SKM3503 and DEA / MARMON RIDE CONTROL A20027.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

27 Oil parts for the 2025 Chrysler Voyager come from 5 brands — VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. The "Popular" part is LIQUI MOLY 2208. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, PENTOSIN and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2025 Chrysler Voyager come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

This group includes HOLSTEIN 2OFH0003 and STANDARD MOTOR PRODUCTS OFH111.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Chrysler Voyager — MAHLE / CLEVITE GS33753.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 2025 Chrysler Voyager come from DORMAN.

Part numbers include DORMAN 090053 and DORMAN 090115.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO205.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts for the 2025 Chrysler Voyager come from 13 brands — WIX, PRO-TEC, BOSCH and 10 other brands. The "Popular" part is PRO-TEC PXL10010.

The Economy section: 8 options from PRO-TEC, BOSCH, CHAMP / LUBER-FINER and 5 other brands. PRO-TEC PXL10010 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX WL10010XP is listed in this group.

Standard Replacement: 4 parts, from WIX, FEL-PRO, HENGST and 1 other brand. A representative part number is WIX WL10010.

This table covers the Oil Filter covers. Read more

One part is listed for the 2025 Chrysler Voyager — MOTORAD MO327.

This table covers the Oil Filter housings. Read more

5 Oil Filter Housing parts are listed for the 2025 Chrysler Voyager, from DORMAN, FEL-PRO, HOLSTEIN and 2 other brands. DORMAN 926959 carries the "Popular" badge.

Listed part numbers: DORMAN 926959, FEL-PRO OFHA1001 and HOLSTEIN 2OFH0003, plus the other parts above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: DORMAN 926959G.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2025 Chrysler Voyager come from 2 brands — ENGINETECH and MELLING.

This group includes ENGINETECH EP588 and MELLING M588.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2025 Chrysler Voyager — MELLING 1072.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: MELLING BT7034.

This table covers the pickup tubes and screens that feed the oil pump. Read more

One part is listed for the 2025 Chrysler Voyager — MELLING 426S.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2025 Chrysler Voyager — MELLING S1254.

This table covers the rocker arms that transfer cam motion to the valves. Read more

2 Rocker Arm parts for the 2025 Chrysler Voyager come from 2 brands — MELLING and SBI.

This group includes MELLING MR1361 and SBI 1801332.

This table covers the timing chains that keep the cams in time with the crank. Read more

MELLING supplies both parts for the 2025 Chrysler Voyager.

This group includes MELLING 1080 and MELLING 1071.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts for the 2025 Chrysler Voyager come from MELLING.

This group includes MELLING 31080SX, MELLING 31080SXWP and MELLING 31080S and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

MELLING supplies the 4 Timing Chain Guide / Damper parts for the 2025 Chrysler Voyager.

Listed part numbers: MELLING BT7017, MELLING BG5084 and MELLING BT5020, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Chain Tensioner parts for the 2025 Chrysler Voyager come from MELLING.

Listed part numbers: MELLING BT5112, MELLING BT5113 and MELLING BT5111.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5279.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67972.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: MELLING S1255.

This table covers the Timing Idler sprockets. Read more

One part is listed for the 2025 Chrysler Voyager — MELLING S1253.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts are listed for the 2025 Chrysler Voyager, from SKP and DEA / MARMON RIDE CONTROL.

Economy: 1 part, from SKP. A representative part number is SKP SKM3502.

The Standard Replacement section: 1 option from DEA / MARMON RIDE CONTROL. DEA / MARMON RIDE CONTROL A20070 is listed in this group.

Part numbers include SKP SKM3502 and DEA / MARMON RIDE CONTROL A20070.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2025 Chrysler Voyager come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

This group includes FEL-PRO VS50960R and MAHLE / CLEVITE VS50919.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2025 Chrysler Voyager come from 2 brands — ENGINETECH and SBI.

Listed part numbers: ENGINETECH GD3282 and SBI 1403182.

This table covers the Valve seats. Read more

SBI supplies both parts for the 2025 Chrysler Voyager.

Part numbers include SBI SB125066PM and SBI SB162567PM.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts are listed for the 2025 Chrysler Voyager, from MELLING and SBI.

Part numbers include MELLING VS1615 and SBI 1601656.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2025 Chrysler Voyager, from MELLING and SBI.

Listed part numbers: MELLING VL1120 and SBI 1211082.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 2025 Chrysler Voyager come from 2 brands — MAHLE / CLEVITE and SBI.

Listed part numbers: MAHLE / CLEVITE SS46057 and SBI 1221442.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 Chrysler Voyager come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. The "Popular" part is STANDARD MOTOR PRODUCTS VVT750.

The Economy section: 1 option from WELLS. WELLS 2T1310 is listed in this group.

Standard Replacement: 5 parts, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT750.

Listed part numbers: STANDARD MOTOR PRODUCTS VVT750, WELLS 2T1310 and STANDARD MOTOR PRODUCTS VVT352, plus the other parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS VVT714.