2009 Dodge Caliber Engine Parts

This table covers the camshafts that open the valves. Read more

4 Camshaft parts are listed for the 2009 Dodge Caliber, from MOPAR and SKP.

This group includes MOPAR 4884736AC, MOPAR 4884735AC and SKP SKES0355 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 1016A031.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2009 Dodge Caliber come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes APEX ATC11030, FEL-PRO TCS45961 and MAHLE / CLEVITE 48392 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2009 Dodge Caliber, from MAHLE / CLEVITE, TOPLINE, ENGINETECH and 1 other brand. TOPLINE RBHY11 carries the "Popular" badge.

Listed part numbers: TOPLINE RBHY11, ENGINETECH BB167J and ITM ENGINE COMPONENTS 4B2024, plus the other parts above.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR MN195112.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2009 Dodge Caliber, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH CR122CSB carries the "Popular" badge.

Part numbers include ENGINETECH CR122CSB, AJUSA 54153400 and APEX ACS2085, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 2009 Dodge Caliber come from 4 brands — TOPLINE, MOPAR, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BC152J.

Listed part numbers: ENGINETECH BC152J, TOPLINE TWHY11 and ITM ENGINE COMPONENTS 5M1524, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2009 Dodge Caliber come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WS99166.

Part numbers include WJB / INMOTION PARTS WS99166, WJB / INMOTION PARTS WS99333 and BCA NS99166, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

25 Crankshaft Seal parts for the 2009 Dodge Caliber come from 15 brands — VICTOR REINZ, AJUSA, FEL-PRO and 12 other brands. The "Popular" part is AJUSA 15052700.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts are listed for the 2009 Dodge Caliber, from FEL-PRO, SKP, AJUSA and 4 other brands. FEL-PRO ES72267 carries the "Popular" badge.

Listed part numbers: FEL-PRO ES72267, SKP SKES72267 and AJUSA 81041900, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2009 Dodge Caliber, from ULTRA-POWER, APEX, FEL-PRO and 2 other brands. APEX AHG285 carries the "Popular" badge.

This group includes APEX AHG285, FEL-PRO 26557PT and AJUSA 10176800 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2009 Dodge Caliber, from FEL-PRO, APEX, AJUSA and 3 other brands. APEX AHS2085 carries the "Popular" badge.

Listed part numbers: APEX AHS2085, FEL-PRO HS26360PT and AJUSA 52258600, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2009 Dodge Caliber come from 2 brands — KAT'S HEATERS and MOPAR.

Part numbers include KAT'S HEATERS 11812 and MOPAR 5033557AB.

This table covers the Engine covers. Read more

MOPAR supplies the 3 Engine Cover parts for the 2009 Dodge Caliber.

Part numbers include MOPAR 5030284AC, MOPAR 5116196AA and MOPAR 5116197AA.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2009 Dodge Caliber, from AJUSA, APEX, ENGINETECH and 1 other brand.

This group includes AJUSA 50276500, APEX AFS2085 and ENGINETECH CR122K5 and the remaining parts above.

This table covers the brackets that mount the Engine Lift. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 4884752AC.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2009 Dodge Caliber come from 7 brands — MELLING, QUALCAST, ENGINETECH and 4 other brands. The "Popular" part is MELLING V3191.

This group includes MELLING V3191, QUALCAST 1013191 and ENGINETECH V4449 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 2009 Dodge Caliber, from SKP, DORMAN, ATP and 3 other brands. SKP SK594341 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594341.

The Standard Replacement section lists 5 options from DORMAN, ATP, DAYCO and 2 other brands — built to original-equipment specification. DORMAN 594341 is listed in this group.

This group includes SKP SK594341, DORMAN 594341 and ATP 102326 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts for the 2009 Dodge Caliber come from 2 brands — MOPAR and SKP.

Listed part numbers: MOPAR 4884495AF and SKP SK615116.

This table covers the Intake Manifold bolts. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 6104124AA.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2009 Dodge Caliber, from VICTOR REINZ, APEX, FEL-PRO and 2 other brands. APEX AMS2850 carries the "Popular" badge.

This group includes APEX AMS2850, FEL-PRO MS96840 and MAHLE / CLEVITE MS19561 and the remaining parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2009 Dodge Caliber, from SKP, DORMAN, MOPAR and 2 other brands. SKP SK911902 carries the "Popular" badge.

Part numbers include SKP SK911902, DORMAN 911902 and MOPAR 4884549AD, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2009 Dodge Caliber come from 6 brands — ENGINETECH, MELLING, MOPAR and 3 other brands. The "Popular" part is ENGINETECH V4448.

This group includes ENGINETECH V4448, MELLING V3190 and MOPAR 5047068AA and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

17 Motor Mount parts for the 2009 Dodge Caliber come from 8 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 5 other brands. The "Popular" part is SKP SKM3131.

The Economy section: 3 options from SKP and AUTO EXTRA. SKP SKM3131 is listed in this group.

Standard Replacement: 14 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 3 other brands. A representative part number is ANCHOR 3130.

This table covers the Motor Mount bolts. Read more

MOPAR supplies both parts for the 2009 Dodge Caliber.

Listed part numbers: MOPAR 4809963AE and MOPAR 6508235AA.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 5105596AB.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL AM028.

This table covers the isolators in an engine mount. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 5038045AB.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300172.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

34 Oil parts for the 2009 Dodge Caliber come from 4 brands — VALVOLINE, MOBIL, IDEMITSU and 1 other brand. The "Popular" part is LIQUI MOLY 2259. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, IDEMITSU, MOBIL and 1 other brand.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

7 Oil Cooler parts for the 2009 Dodge Caliber come from 7 brands — DORMAN, SKP, AUTOTECNICA and 4 other brands. The "Popular" part is DORMAN 918968.

This group includes DORMAN 918968, SKP SK4884757AE and AUTOTECNICA CY1423683 and the remaining parts above.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2009 Dodge Caliber.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2009 Dodge Caliber — FEL-PRO 71830.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2009 Dodge Caliber come from MOPAR.

This group includes MOPAR 4884733AC and MOPAR 4884688AD.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2009 Dodge Caliber come from 4 brands — DORMAN, AGS, MOPAR and 1 other brand. The "Popular" part is AGS ODP00007.

Part numbers include AGS ODP00007, DORMAN 090053 and DORMAN 090115, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Dodge Caliber — FEL-PRO 72907.

This table covers the caps on the oil filler neck. Read more

7 Oil Filler Cap parts for the 2009 Dodge Caliber come from 6 brands — MOPAR, GATES, MOTORAD and 3 other brands. The "Popular" part is GATES 31118.

This group includes GATES 31118, MOTORAD MO111 and CALORSTAT OC2333 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2009 Dodge Caliber come from 14 brands — VARIOUS MFR, WIX, ACDELCO and 11 other brands. The "Popular" part is WIX 57060XP.

The Economy section: 5 options from FRAM, FVP, PRO-TEC and 2 other brands. FRAM FE10060 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57060XP is listed in this group.

Standard Replacement: 11 parts, from ACDELCO, MOPAR, BOSCH and 6 other brands. A representative part number is ACDELCO PF48.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 5047077AA.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2009 Dodge Caliber, from DORMAN, MOPAR, SPECTRA PREMIUM and 1 other brand.

This group includes DORMAN 264176, MOPAR 4884664AE and SPECTRA PREMIUM CRP75A and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 2009 Dodge Caliber come from 4 brands — VICTOR REINZ, APEX, FEL-PRO and 1 other brand. The "Popular" part is VICTOR REINZ 703141410.

This group includes VICTOR REINZ 703141410, APEX AOP285 and FEL-PRO OS30782 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: TOPLINE OPMI37.

This table covers the chains that drive the oil pump. Read more

5 Oil Pump Chain parts are listed for the 2009 Dodge Caliber, from PREFERRED COMPONENTS INC, INA and S.A. GEAR. PREFERRED COMPONENTS INC C776 carries the "Popular" badge.

Economy: 1 part, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC C776.

In the Kit grade, INA and PREFERRED COMPONENTS INC supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC76241PS.

The Standard Replacement section: 2 options from INA and S.A. GEAR. INA ZCC737F is listed in this group.

Part numbers include PREFERRED COMPONENTS INC C776, INA ZC76241PS and PREFERRED COMPONENTS INC TS21172A, among others listed above.

This table covers the Oil Pump Chain guides. Read more

4 Oil Pump Chain Guide parts are listed for the 2009 Dodge Caliber, from INA, MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: INA ZG95685, INA ZG95558 and MELLING BG7018, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts for the 2009 Dodge Caliber come from 2 brands — INA and PREFERRED COMPONENTS INC.

Listed part numbers: INA ZT91075 and PREFERRED COMPONENTS INC T66332.

This table covers the Oil Temperature senders. Read more

3 Oil Temperature Sender parts are listed for the 2009 Dodge Caliber, from HOLSTEIN, MOPAR and STANDARD MOTOR PRODUCTS.

Economy: 1 part, from HOLSTEIN. A representative part number is HOLSTEIN 2CTS0061.

The Standard Replacement section: 2 options from MOPAR and STANDARD MOTOR PRODUCTS. MOPAR 5033314AA is listed in this group.

Listed part numbers: HOLSTEIN 2CTS0061, MOPAR 5033314AA and STANDARD MOTOR PRODUCTS TX194.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

ENGINETECH supplies both parts for the 2009 Dodge Caliber.

Listed part numbers: ENGINETECH P5080 and ENGINETECH K50804P.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts are listed for the 2009 Dodge Caliber, from HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH S86124 carries the "Popular" badge.

The Premium section lists 3 options from ENGINETECH, MAHLE / CLEVITE and SEALED POWER — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S86124 is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. HASTINGS MANUFACTURING 2C4835 is listed in this group.

This group includes ENGINETECH S86124, MAHLE / CLEVITE 42110CP and SEALED POWER E1027KC and the remaining parts above.

This table covers the Spring retainers. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 4761150.

This table covers the Thrust washers. Read more

2 Thrust Washer parts for the 2009 Dodge Caliber come from 2 brands — ENGINETECH and ITM ENGINE COMPONENTS.

Listed part numbers: ENGINETECH TW1041 and ITM ENGINE COMPONENTS 1T1024.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 68055039AA.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2009 Dodge Caliber, from MELLING, CLOYES, INA and 2 other brands. MELLING 900C carries the "Popular" badge.

Part numbers include MELLING 900C, CLOYES C736F and INA ZCC736F, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

7 Timing Chain & Component Kit parts for the 2009 Dodge Caliber come from 5 brands — INA, PREFERRED COMPONENTS INC, S.A. GEAR and 2 other brands. The "Popular" part is PREFERRED COMPONENTS INC TS21181.

The Economy section: 2 options from PREFERRED COMPONENTS INC and S.A. GEAR. PREFERRED COMPONENTS INC TS21181 is listed in this group.

Standard Replacement: 5 parts, from INA, MELLING and ENGINETECH. A representative part number is MELLING 3900CSX.

Part numbers include PREFERRED COMPONENTS INC TS21181, S.A. GEAR 76241TS and MELLING 3900CSX, among others listed above.