2009 Dodge Caliber Automatic Transmission Parts

This table covers the transmission or transfer-case housings. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 68026543AA.

This table covers the Dipstick / Fluid Filler tubes. Read more

3 Dipstick / Fluid Filler Tube parts are listed for the 2009 Dodge Caliber, from DORMAN and MOPAR.

This group includes DORMAN 917327, DORMAN 921129 and MOPAR 5273372AF.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts are listed for the 2009 Dodge Caliber, from ATP, PIONEER, HASTINGS / BALDWIN and 1 other brand. PIONEER 745325 carries the "Popular" badge.

Listed part numbers: PIONEER 745325, ATP B429 and ATP B235, plus the other parts above.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

This group shows a single part: MOPAR 4736238AA.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

3 Fluid Cooler parts are listed for the 2009 Dodge Caliber, from GPD, SKP and SPECTRA PREMIUM.

Listed part numbers: GPD 2611349, SKP SKTOC077 and SPECTRA PREMIUM FC1323T.

This table covers the Fluid Cooler Control valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: DORMAN 624654.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Fluid Cooler Line / Hose parts are listed for the 2009 Dodge Caliber, from DORMAN and SUNSONG.

Part numbers include DORMAN 624752, DORMAN 624753 and SUNSONG 5802127.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts for the 2009 Dodge Caliber come from 4 brands — ATP, SKP, SPECTRA PREMIUM and 1 other brand.

Part numbers include ATP 103369, SKP SK265834 and SPECTRA PREMIUM TP0834, among others listed above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Fluid Pan Gasket parts are listed for the 2009 Dodge Caliber, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO TOS18755, MAHLE / CLEVITE W32836 and VICTOR REINZ 711496600.

This table covers the Fluid Pan magnets. Read more

This group shows a single part: MOPAR 4761078AB.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts for the 2009 Dodge Caliber come from 2 brands — SKF and WJB / INMOTION PARTS.

Part numbers include SKF 20072A and WJB / INMOTION PARTS WS20072A.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2009 Dodge Caliber come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Output Shaft Bearing parts for the 2009 Dodge Caliber come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT32008X is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB32008.

Listed part numbers: WJB / INMOTION PARTS WT32008X, BCA NB32008 and NATIONAL 32008.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts are listed for the 2009 Dodge Caliber, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS710598, NATIONAL 710598 and SCHAEFFLER SS2658, plus the other parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2009 Dodge Caliber — ROSTRA 520539.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 2009 Dodge Caliber come from 2 brands — PA CARGO and TRANSTEC. The "Popular" part is TRANSTEC 81000629.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 2 options from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK12500BS is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK12500B.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from TRANSTEC and PA CARGO — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. TRANSTEC 81000629 is listed in this group.

Part numbers include TRANSTEC 81000629, PA CARGO DK12500BS and PA CARGO DK12500S, among others listed above.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

4 Shift Cable parts for the 2009 Dodge Caliber come from MOPAR.

This group includes MOPAR 68024360AA, MOPAR 5038027AB and MOPAR 5038027AD and the remaining parts above.

This table covers the brackets that mount the Shift Cable. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DORMAN 926169.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS2111.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Shift Solenoid parts for the 2009 Dodge Caliber come from 2 brands — ROSTRA and BECK/ARNLEY.

This group includes BECK/ARNLEY 0470021, ROSTRA 520540 and ROSTRA 520722.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2009 Dodge Caliber — ROSTRA 520538.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Torque Converter Shaft Seal parts for the 2009 Dodge Caliber come from 3 brands — NATIONAL, TIMKEN and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710923, TIMKEN SL260359 and WJB / INMOTION PARTS WS710923.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

13 Transmission Fluid parts are listed for the 2009 Dodge Caliber, from PENTOSIN, MOPAR, VAICO and 4 other brands. MOPAR 68218057AC carries the "Popular" badge.

In the ATF +4 grade, PENTOSIN and MOPAR supply 3 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68218057AC.

The CVT section lists 6 options from VAICO, AISIN, VALVOLINE and 2 other brands — grouped under the catalog's "CVT" designation — the notes column spells out what sets them apart. AISIN ATFNS2 is listed in this group.

In the ZF Fluid grade, PENTOSIN and ZF supply 4 parts: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058106.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 5 Transmission Fluid Additive parts for the 2009 Dodge Caliber. LUBEGARD 61910 carries the "Popular" badge.

Listed part numbers: LUBEGARD 61910, LUBEGARD 98010 and LUBEGARD 67010, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2009 Dodge Caliber come from 5 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is SKP SKM3134.

The Economy section: 1 option from SKP. SKP SKM3134 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 3137.

This group includes SKP SKM3134, ANCHOR 3137 and DEA / MARMON RIDE CONTROL A5419 and the remaining parts above.