2009 Dodge Caliber Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

15 Camshaft Position Sensor parts are listed for the 2009 Dodge Caliber, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, HOLSTEIN and 10 other brands. STANDARD MOTOR PRODUCTS PC748T carries the "Popular" badge.

In the Economy grade, STANDARD MOTOR PRODUCTS, HOLSTEIN, PRENCO and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS PC748T.

The Standard Replacement section lists 9 options from WALKER PRODUCTS, MOPAR, STANDARD MOTOR PRODUCTS and 5 other brands — built to original-equipment specification. MOPAR 68080819AD is listed in this group.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Position Sensor Seal parts for the 2009 Dodge Caliber come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 70725 and VICTOR REINZ 711388800.

This table covers the capacitors used in this electrical or A/C circuit. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 4609133AA.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

14 Crankshaft Position Sensor parts are listed for the 2009 Dodge Caliber, from WALKER PRODUCTS, HOLSTEIN, DORMAN and 10 other brands. HOLSTEIN 2CRK0314 carries the "Popular" badge.

Economy: 6 parts, from HOLSTEIN, DORMAN, PRENCO and 3 other brands. A representative part number is HOLSTEIN 2CRK0314.

The Standard Replacement section: 8 options from WALKER PRODUCTS, MOPAR, STANDARD MOTOR PRODUCTS and 4 other brands. MOPAR 5033307AC is listed in this group.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

18 Ignition Coil parts are listed for the 2009 Dodge Caliber, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, SKP and 12 other brands. SKP SKIC505 carries the "Popular" badge.

Economy: 9 parts, from STANDARD MOTOR PRODUCTS, SKP, FVP and 5 other brands. A representative part number is SKP SKIC505.

The Premium section lists 3 options from ASTEMO / HITACHI, DELPHI and STANDARD MOTOR PRODUCTS — a step above OE specification in materials, tolerances or warranty terms. ASTEMO / HITACHI IGC0170 is listed in this group.

The Standard Replacement section: 6 options from WALKER PRODUCTS, DENSO, WELLS and 2 other brands. DENSO 6735301 is listed in this group.

This table covers the gaskets that seal the Ignition Coil Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Dodge Caliber — MOPAR 4884765AA.

This table covers the lock cylinders in the ignition switch. Read more

4 Ignition Lock Cylinder parts are listed for the 2009 Dodge Caliber, from DORMAN, MOPAR, STANDARD MOTOR PRODUCTS and 1 other brand.

Economy: 1 part, from DORMAN. A representative part number is DORMAN 924721.

The Standard Replacement section: 3 options from MOPAR, STANDARD MOTOR PRODUCTS and WELLS. MOPAR 5179511AA is listed in this group.

Listed part numbers: DORMAN 924721, MOPAR 5179511AA and STANDARD MOTOR PRODUCTS US537L, plus the other parts above.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

23 Spark Plug parts for the 2009 Dodge Caliber come from 7 brands — DENSO, NGK, BOSCH and 4 other brands. The "Popular" part is NGK 2262.

The Copper / Nickel section lists 6 options from NGK, BOSCH, CHAMPION and 3 other brands — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. NGK 2262 is listed in this group.

The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 5 options from ACDELCO, BOSCH, CHAMPION and 2 other brands — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 41806 is listed in this group.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, DENSO, NGK, BOSCH and 1 other brand supply 6 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 2477.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 5 options from DENSO, NGK, ACDELCO and 2 other brands — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. DENSO 4503 is listed in this group.

The Ruthenium (maximum durability & ignitability) section lists 1 option from NGK — grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. NGK 95839 is listed in this group.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

7 Spark Plug / Ignition Coil Boot parts are listed for the 2009 Dodge Caliber, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WALKER PRODUCTS and 3 other brands. DENSO 6714285 carries the "Popular" badge.

Economy: 3 parts, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WALKER PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 20491.

The Standard Replacement section: 4 options from DENSO, STANDARD MOTOR PRODUCTS, NGK and 1 other brand. DENSO 6714285 is listed in this group.

Part numbers include DENSO 6714285, STANDARD MOTOR PRODUCTS 20491 and UNITED MOTOR PRODUCTS 9013S, among others listed above.