2009 Dodge Challenger Drivetrain Parts

This table covers the Axle / Differential assemblies. Read more

MOPAR supplies both parts for the 2009 Dodge Challenger.

This group includes MOPAR 4593853AA and MOPAR 5038293AE.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts for the 2009 Dodge Challenger come from 2 brands — NATIONAL and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 710999.

Listed part numbers: NATIONAL 710999, NATIONAL 711054 and NATIONAL 711078, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

6 CV Axle parts for the 2009 Dodge Challenger come from 3 brands — TRAKMOTIVE, TOP NOTCH and MOPAR. The "Popular" part is TOP NOTCH TN30222.

Listed part numbers: TOP NOTCH TN30222, TRAKMOTIVE CH8362 and MOPAR 5180490AC, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts for the 2009 Dodge Challenger come from 2 brands — WJB / INMOTION PARTS and BCA. The "Popular" part is WJB / INMOTION PARTS WT32010X.

The Economy section lists 3 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT32010X is listed in this group.

In the Standard Replacement grade, BCA supplies 3 parts: built to original-equipment specification. A representative part number is BCA NB32010X.

Part numbers include WJB / INMOTION PARTS WT32010X, WJB / INMOTION PARTS WTLM806610 and WJB / INMOTION PARTS WTLM806649, among others listed above.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: ENERGY SUSPENSION 51115G.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

MOPAR supplies both parts for the 2009 Dodge Challenger.

This group includes MOPAR 4578191AA and MOPAR 4578085AA.

This table covers the bearings and races on the differential pinion. Read more

28 Differential Pinion Bearing / Race parts are listed for the 2009 Dodge Challenger, from BCA, WJB / INMOTION PARTS, FAMOUS BRAND and 5 other brands. WJB / INMOTION PARTS WTM802011 carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 18 parts.

This table covers the baffles that control oil at the pinion bearings. Read more

One part is listed for the 2009 Dodge Challenger — RICHMOND 0400152.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

This group shows a single part: DORMAN 697630.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts for the 2009 Dodge Challenger come from 2 brands — NATIONAL and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 711055.

Listed part numbers: NATIONAL 711055, NATIONAL 710998 and NATIONAL 710996, plus the other parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Seal parts are listed for the 2009 Dodge Challenger, from ELRING, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: ELRING B17490, ELRING B17540 and NATIONAL 711050, plus the other parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2009 Dodge Challenger, from DORMAN, GSP and MOPAR.

Part numbers include DORMAN 936167, DORMAN 966527 and GSP PS901797, among others listed above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Drive Shaft Center Support Bearing parts are listed for the 2009 Dodge Challenger, from WJB / INMOTION PARTS, WESTAR, DANA and 3 other brands. WJB / INMOTION PARTS WCHB44 carries the "Popular" badge.

Economy: 2 parts, from WJB / INMOTION PARTS and WESTAR. A representative part number is WJB / INMOTION PARTS WCHB44.

The Standard Replacement section: 4 options from DANA, BCA, MOPAR and 1 other brand. DANA 252110201X is listed in this group.

Part numbers include WJB / INMOTION PARTS WCHB44, WESTAR DS6500 and DANA 252110201X, among others listed above.

This table covers the flex joints in the driveshaft. Read more

5 Drive Shaft Flex Joint parts for the 2009 Dodge Challenger come from 3 brands — DORMAN, MOOG and NATIONAL. The "Popular" part is DORMAN 935601.

This group includes DORMAN 935601, DORMAN 935510 and MOOG 671 and the remaining parts above.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING B15340.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

7 Gear Oil parts for the 2009 Dodge Challenger come from 3 brands — VALVOLINE, MOBIL and IDEMITSU. The "Popular" part is MOBIL 104361.

The SAE 75W-140 section lists 1 option from MOBIL — grouped under the catalog's "SAE 75W-140" designation — the notes column spells out what sets them apart. MOBIL 102490 is listed in this group.

The SAE 75W-90 section lists 5 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: MOBIL 104361, MOBIL 102490 and VALVOLINE VV975, plus the other parts above.

This table covers the Gear Oil additives. Read more

This group shows a single part: USA STANDARD GEAR USA15018.

This table covers the Transfer Case Main Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Main Shaft Pilot Bearing parts are listed for the 2009 Dodge Challenger, from WJB / INMOTION PARTS, BCA and NATIONAL.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA16.

The Standard Replacement section: 2 options from BCA and NATIONAL. BCA NBA16 is listed in this group.

Part numbers include WJB / INMOTION PARTS WTA16, BCA NBA16 and NATIONAL A16.