2020 Dodge Challenger Drivetrain Parts

This table covers the Axle / Differential assemblies. Read more

6 Axle / Differential Assembly parts for the 2020 Dodge Challenger come from MOPAR.

This group includes MOPAR 68427796AA, MOPAR 68427798AA and MOPAR 68494250AC and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

TIMKEN supplies both parts for the 2020 Dodge Challenger.

Listed part numbers: TIMKEN SL260465 and TIMKEN SL260468.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

22 CV Axle parts are listed for the 2020 Dodge Challenger, from MOPAR, TRAKMOTIVE, FAMOUS BRAND and 2 other brands. FAMOUS BRAND NCV479097 carries the "Popular" badge.

In the Economy grade, FAMOUS BRAND supplies 2 parts: the catalog's value-priced group. A representative part number is FAMOUS BRAND NCV479097.

The Standard Replacement section lists 12 options from MOPAR, TRAKMOTIVE, GSP and 1 other brand — built to original-equipment specification. TRAKMOTIVE MI8172 is listed in this group.

8 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the constant-velocity joints at each end of a drive axle. Read more

One part is listed for the 2020 Dodge Challenger — AAM 40204687.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

MOPAR supplies both parts for the 2020 Dodge Challenger.

Listed part numbers: MOPAR 5142215AA and MOPAR 5142216AA.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Dodge Challenger — ELRING B12900.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: MOPAR 68242692AA.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts are listed for the 2020 Dodge Challenger, from SKF and WJB / INMOTION PARTS.

Part numbers include SKF 19877A and WJB / INMOTION PARTS WS19877A.

This table covers the Differential Pinion shims. Read more

MOPAR supplies the 5 Differential Pinion Shim parts for the 2020 Dodge Challenger.

Listed part numbers: MOPAR 5142921AA, MOPAR 5142922AA and MOPAR 5142923AA, plus the other parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Seal parts for the 2020 Dodge Challenger come from 2 brands — ELRING and MOPAR.

This group includes ELRING B17490, ELRING B17500 and ELRING B17540 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

14 Drive Shaft parts for the 2020 Dodge Challenger come from 7 brands — MOPAR, GSP, DORMAN and 4 other brands. The "Popular" part is DORMAN 986031.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Drive Shaft Seal parts are listed for the 2020 Dodge Challenger, from ELRING and MOPAR.

This group includes ELRING B15340 and MOPAR 5143144AA.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

7 Gear Oil parts are listed for the 2020 Dodge Challenger, from MOPAR, IDEMITSU, VALVOLINE and 1 other brand. MOBIL 104361 carries the "Popular" badge.

In the SAE 75W-85 grade, MOPAR supplies 2 parts: grouped under the catalog's "SAE 75W-85" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68232947AC.

In the SAE 75W-90 grade, MOBIL and IDEMITSU supply 2 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 104361.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: MOBIL 104361, MOPAR 68232947AC and MOPAR 68083381AA, plus the other parts above.

This table covers the Transfer Case control modules. Read more

This group shows a single part: MOPAR 68528334AB.