2009 Dodge Viper Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

17 Coolant / Antifreeze parts for the 2009 Dodge Viper come from 7 brands — PRESTONE, PEAK, FVP and 4 other brands. The "Popular" part is FVP MV5050GAL.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PEAK, PRESTONE and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE ZXG051.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, PRESTONE, ACDELCO, AISIN and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is ACDELCO 105027.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

2 Coolant Hose / Pipe parts for the 2009 Dodge Viper come from MOPAR.

This group includes MOPAR 4266423 and MOPAR 5030600AC.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

MOTORAD supplies the 5 Coolant Reservoir Cap parts for the 2009 Dodge Viper. MOTORAD T22 carries the "Popular" badge.

Listed part numbers: MOTORAD T22, MOTORAD ST22 and MOTORAD MRD510, plus the other parts above.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2009 Dodge Viper come from 3 brands — ACDELCO, GATES and MOTORAD.

This group includes ACDELCO 12A01, GATES 31413 and MOTORAD 3003.

This table covers the Hose clamps. Read more

2 Hose Clamp parts for the 2009 Dodge Viper come from MOPAR.

This group includes MOPAR 52006750 and MOPAR 6033369.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

This group shows a single part: MOPAR 5264994AC.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Radiator Cap parts for the 2009 Dodge Viper come from 3 brands — MOTORAD, CALORSTAT and GATES.

In the Locking Replacement grade, MOTORAD supplies 1 part: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is MOTORAD ST16.

Standard Replacement: 3 parts, from CALORSTAT, GATES and MOTORAD. A representative part number is CALORSTAT RC0152.

Part numbers include MOTORAD ST16, CALORSTAT RC0152 and GATES 31522, among others listed above.

This table covers the petcocks used to drain the radiator. Read more

2 Radiator Drain Petcock parts are listed for the 2009 Dodge Viper, from DORMAN and MOPAR.

This group includes DORMAN 490232 and MOPAR 52029087AA.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

3 Radiator Fan Assembly parts are listed for the 2009 Dodge Viper, from GPD, UAC and VDO / CONTINENTAL.

Economy: 1 part, from GPD. A representative part number is GPD 2811574.

The Standard Replacement section: 2 options from UAC and VDO / CONTINENTAL. UAC FA50039C is listed in this group.

Listed part numbers: GPD 2811574, UAC FA50039C and VDO / CONTINENTAL FA70272.

This table covers the Radiator Fan blades. Typical signs include chatter, streaks, or a skip at the top of the stroke. Confirm left and right lengths in the notes — they are often different. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 68034687AA.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

3 Radiator Fan Motor parts for the 2009 Dodge Viper come from 2 brands — MOPAR and VEMO.

Part numbers include MOPAR 5137714AA, MOPAR 5170746AA and VEMO V33010027.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

4 Radiator Hose parts are listed for the 2009 Dodge Viper, from CONTINENTAL and MOPAR.

Listed part numbers: CONTINENTAL 66817, CONTINENTAL 66818 and MOPAR 5264986AF, plus the other parts above.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

MOPAR supplies both parts for the 2009 Dodge Viper.

Part numbers include MOPAR 52027827 and MOPAR 4809071AB.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

14 Temperature Sender / Sensor parts for the 2009 Dodge Viper come from 13 brands — STANDARD MOTOR PRODUCTS, DORMAN, GPD and 10 other brands. The "Popular" part is DELPHI TS10330.

The Economy section: 7 options from DORMAN, GPD, HOLSTEIN and 4 other brands. DORMAN 926427 is listed in this group.

Standard Replacement: 7 parts, from DELPHI, NTK, STANDARD MOTOR PRODUCTS and 4 other brands. A representative part number is DELPHI TS10330.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

9 Thermostat parts are listed for the 2009 Dodge Viper, from MOTORAD, CALORSTAT and GATES. MOTORAD 880090 carries the "Popular" badge.

The Heavy Duty section: 1 option from GATES. GATES 34318 is listed in this group.

The Standard Replacement section: 8 options from MOTORAD and CALORSTAT. MOTORAD 880090 is listed in this group.

Part numbers include MOTORAD 880090, GATES 34318 and MOTORAD 880080, among others listed above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2009 Dodge Viper come from 4 brands — FEL-PRO, APEX, MOPAR and 1 other brand. The "Popular" part is FEL-PRO 35799.

Listed part numbers: FEL-PRO 35799, FEL-PRO 35773 and APEX AWO2230, plus the other parts above.

This table covers the housings and outlets the thermostat sits in. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5045558AA.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5037730AA.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Water Pump Gasket parts for the 2009 Dodge Viper come from 4 brands — APEX, FEL-PRO, MOPAR and 1 other brand.

Listed part numbers: APEX AWP3192, FEL-PRO 35775 and MOPAR 5037171AB, plus the other parts above.