2009 Dodge Viper Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 A/C Compressor Relay Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS, FOUR SEASONS and WELLS.

This group includes FOUR SEASONS 37210, STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654 and the remaining parts above.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2009 Dodge Viper, from FOUR SEASONS and STANDARD MOTOR PRODUCTS.

This group includes FOUR SEASONS 37287 and STANDARD MOTOR PRODUCTS S1923.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1959.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Accelerator Pedal Position Sensor Connector parts for the 2009 Dodge Viper come from 2 brands — ROSTRA and WELLS.

This group includes ROSTRA 610494 and WELLS 1P2224.

This table covers the harness connectors at the Air Bag. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1926.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Alternator / Generator Connector parts for the 2009 Dodge Viper come from WELLS.

Part numbers include WELLS 1P1344 and WELLS 1P1580.

This table covers the harness connectors at the Auto Shut Down Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Auto Shut Down Relay Connector parts for the 2009 Dodge Viper come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Back Up / Reverse Lamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Back Up / Reverse Lamp Switch Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS and SKP.

This group includes SKP SKS712, STANDARD MOTOR PRODUCTS HP4375 and STANDARD MOTOR PRODUCTS S712.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Blower Motor Control Module / Resistor Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 3 other brands. STANDARD MOTOR PRODUCTS S1519 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS S1519, WELLS 1P1789 and FOUR SEASONS 37257, among others listed above.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

3 Body Wiring Harness / Connector parts are listed for the 2009 Dodge Viper, from MOPAR and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOPAR 5030438AD, MOPAR 5030736AD and STANDARD MOTOR PRODUCTS S1960.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2313 and WELLS 1P2383.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts for the 2009 Dodge Viper come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, HOLSTEIN and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316.

Listed part numbers: STANDARD MOTOR PRODUCTS S2316, WALKER PRODUCTS 2701145 and HOLSTEIN 2HAR0060, plus the other parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Crankshaft Position Sensor Connector parts for the 2009 Dodge Viper come from 3 brands — ROSTRA, WALKER PRODUCTS and WELLS.

Part numbers include ROSTRA 610139, WALKER PRODUCTS 2701145 and WELLS 1P2524.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 68039351AA.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1580.

This table covers the harness connectors at the Fuel Pump Cutoff Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Pump Cutoff Relay Connector parts for the 2009 Dodge Viper come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Headlamp Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1610.

This table covers the harness connectors at the Headlamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Headlamp Relay Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1610.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

3 Headlamp Wiring Harness / Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS and MOPAR.

Part numbers include MOPAR 5030432AG, STANDARD MOTOR PRODUCTS F90008 and STANDARD MOTOR PRODUCTS LWH106.

This table covers the harness connectors at the Heated Window Element. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2009 Dodge Viper — WELLS 1P2226.

This table covers the harness connectors at the Horn. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2009 Dodge Viper — WELLS 1P1580.

This table covers the harness connectors at the Horn Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Horn Relay Connector parts for the 2009 Dodge Viper come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Coil Connector parts for the 2009 Dodge Viper come from 5 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, ROSTRA and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1415.

Listed part numbers: STANDARD MOTOR PRODUCTS S1415, UNITED MOTOR PRODUCTS CON21 and ROSTRA 610036, plus the other parts above.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Starter Switch Connector parts for the 2009 Dodge Viper come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, BWD/NIEHOFF and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1768.

This group includes STANDARD MOTOR PRODUCTS S1768, WELLS 1P1558 and BWD/NIEHOFF PT1267 and the remaining parts above.

This table covers the harness connectors at the Impact / Crash Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P4226.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts for the 2009 Dodge Viper come from 2 brands — WALKER PRODUCTS and WELLS.

Listed part numbers: WALKER PRODUCTS 2701034 and WELLS 1P1819.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Manifold Pressure (MAP) Sensor Connector parts for the 2009 Dodge Viper come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

This group includes ROSTRA 610107, STANDARD MOTOR PRODUCTS S2086 and WELLS 1P1795.

This table covers the harness connectors at the Multi-Function Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2009 Dodge Viper — WELLS 1P1143.

This table covers the harness connectors at the Multi-Function Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Multi-Function Switch Connector parts for the 2009 Dodge Viper come from 3 brands — DORMAN, ROSTRA and WELLS.

This group includes DORMAN 645206, ROSTRA 610283 and WELLS 1P1610.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oil Pressure Sender / Switch Connector parts are listed for the 2009 Dodge Viper, from ROSTRA and WELLS.

This group includes ROSTRA 610014 and WELLS 1P1080.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oil Temperature Sender Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2053 and WELLS 1P2227.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2009 Dodge Viper come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1932 and WELLS 1P3360.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2009 Dodge Viper — METRA AXACCH4.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1927.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 3 Radio Connector parts for the 2009 Dodge Viper.

This group includes METRA 706502, METRA 716502 and METRA AWWHCR2.

This table covers the harness connectors at the Side Marker Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Side Marker Lamp Connector parts are listed for the 2009 Dodge Viper, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4665, STANDARD MOTOR PRODUCTS S2034 and UNITED MOTOR PRODUCTS CON57, plus the other parts above.

This table covers the harness connectors at the Tail Lamp Assembly. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: UNITED MOTOR PRODUCTS CON54.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts for the 2009 Dodge Viper come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1057.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Position Sensor (TPS) Connector parts are listed for the 2009 Dodge Viper, from ROSTRA and WELLS.

This group includes ROSTRA 610302 and WELLS 1P2221.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2009 Dodge Viper — WELLS 1P1610.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Canister Purge Valve / Solenoid Connector parts for the 2009 Dodge Viper come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2052, UNITED MOTOR PRODUCTS CON58 and WELLS 1P1711.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Leak Detection Pump Connector parts for the 2009 Dodge Viper come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include ROSTRA 610163, STANDARD MOTOR PRODUCTS S949 and WELLS 1P1493.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Variable Valve Timing (VVT) Solenoid Connector parts for the 2009 Dodge Viper come from 3 brands — STANDARD MOTOR PRODUCTS, ACDELCO and HOLSTEIN.

Listed part numbers: ACDELCO PT2160, HOLSTEIN 2HAR0035 and STANDARD MOTOR PRODUCTS HP3945, plus the other parts above.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Wiper Motor Connector parts for the 2009 Dodge Viper come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.