2009 Dodge Viper Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5037698AA.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 2009 Dodge Viper, from MAHLE / CLEVITE, KING ENGINE BEARINGS and ENGINETECH. MAHLE / CLEVITE CB1808A carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 4 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR8032XPN.

The Standard Replacement section lists 6 options from MAHLE / CLEVITE, KING ENGINE BEARINGS and ENGINETECH — built to original-equipment specification. MAHLE / CLEVITE CB1808A is listed in this group.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6508955AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2009 Dodge Viper, from APEX, FEL-PRO and VICTOR REINZ.

Part numbers include APEX ACS2095, FEL-PRO CS26283 and VICTOR REINZ 081004901.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5037695AB.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2009 Dodge Viper come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE MS2253H and MAHLE / CLEVITE MS2253HX.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2009 Dodge Viper come from 3 brands — TIMKEN, NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99199, TIMKEN 88199 and TIMKEN KWK99199, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2009 Dodge Viper come from 5 brands — NATIONAL, APEX, FEL-PRO and 2 other brands. The "Popular" part is NATIONAL 471424V.

This group includes NATIONAL 471424V, APEX ABS295 and FEL-PRO BS40688 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2009 Dodge Viper, from FEL-PRO, APEX, ENGINETECH and 2 other brands. FEL-PRO ES72209 carries the "Popular" badge.

This group includes FEL-PRO ES72209, APEX AHB295 and ENGINETECH HB285 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2009 Dodge Viper, from APEX, FEL-PRO and MOPAR.

This group includes APEX AHG295, FEL-PRO 26283PT and MOPAR 5037734AB.

This table covers the Engine covers. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5290136AF.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 6036543AA.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5038094AA.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MOPAR 5037718AA.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2009 Dodge Viper come from 3 brands — SKP, ANCHOR and DEA / MARMON RIDE CONTROL.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM2710 is listed in this group.

Standard Replacement: 2 parts, from ANCHOR and DEA / MARMON RIDE CONTROL. A representative part number is ANCHOR 2710.

Listed part numbers: SKP SKM2710, ANCHOR 2710 and DEA / MARMON RIDE CONTROL A2710.

This table covers the Motor Mount Heat insulators. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 4643546.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

5 Oil parts for the 2009 Dodge Viper come from 2 brands — VALVOLINE and IDEMITSU. The "Popular" part is VALVOLINE VV966.

Part numbers include VALVOLINE VV966, IDEMITSU 30041116750 and IDEMITSU 30041116953, among others listed above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOPAR 5290014AE.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: MOPAR 5030648AC.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2009 Dodge Viper.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2009 Dodge Viper come from MOPAR.

Part numbers include MOPAR 5037851AB and MOPAR 5037852AB.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2009 Dodge Viper come from 4 brands — DORMAN, AGS, MOPAR and 1 other brand. The "Popular" part is AGS ODP00007.

Part numbers include AGS ODP00007, DORMAN 090053 and DORMAN 090115, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2009 Dodge Viper, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX ADP1902, FEL-PRO 70822 and MAHLE / CLEVITE 2051, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2009 Dodge Viper come from 5 brands — GATES, CALORSTAT, MOTORAD and 2 other brands. The "Popular" part is GATES 31118.

This group includes GATES 31118, CALORSTAT OC2317 and MOTORAD MO111 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 2009 Dodge Viper come from 10 brands — BOSCH, VARIOUS MFR, CHAMP / LUBER-FINER and 7 other brands. The "Popular" part is MOBIL M1210A.

The Economy section: 4 options from BOSCH, CHAMP / LUBER-FINER, FRAM and 1 other brand. BOSCH 72227WS is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1210A is listed in this group.

Standard Replacement: 7 parts, from BOSCH, HASTINGS / BALDWIN, DENSO and 4 other brands. A representative part number is BOSCH 3410.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5037735AE.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 2009 Dodge Viper come from 4 brands — APEX, FEL-PRO, MOPAR and 1 other brand.

Listed part numbers: APEX AOP295, FEL-PRO OS30755 and MOPAR 5037163AD, plus the other parts above.

This table covers the Oil Pump covers. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5037942AB.

This table covers the pickup tubes and screens that feed the oil pump. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5038022AB.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 53020861.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 2009 Dodge Viper, from HASTINGS MANUFACTURING, MOPAR and ENGINETECH. ENGINETECH M103110 carries the "Popular" badge.

The Premium section lists 3 options from HASTINGS MANUFACTURING and ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH M103110 is listed in this group.

The Standard Replacement section: 2 options from MOPAR. MOPAR 68030808AA is listed in this group.

This group includes ENGINETECH M103110, HASTINGS MANUFACTURING 2M5378S and HASTINGS MANUFACTURING 2M5378 and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

MOPAR supplies both parts for the 2009 Dodge Viper.

Listed part numbers: MOPAR 5037059AA and MOPAR 68026797AA.

This table covers the Timing covers. Read more

One part is listed for the 2009 Dodge Viper — MOPAR 5037708AC.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts for the 2009 Dodge Viper come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO TCS46057.

Part numbers include FEL-PRO TCS46057, APEX ATC2950 and MAHLE / CLEVITE JV5247, among others listed above.

This table covers the Valve covers. Read more

MOPAR supplies both parts for the 2009 Dodge Viper.

This group includes MOPAR 5038162AE and MOPAR 5038163AE.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 5037827AA.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2009 Dodge Viper come from SBI.

This group includes SBI B5544 and SBI B5544A.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: MOPAR 5037812AA.

This table covers the guides that keep each lifter aligned. Read more

This group shows a single part: MOPAR 5037807AA.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts are listed for the 2009 Dodge Viper, from MELLING and MOPAR.

Listed part numbers: MELLING VTSS100 and MOPAR 5038762AA.

This table covers the Valve Spring retainers. Read more

3 Valve Spring Retainer parts are listed for the 2009 Dodge Viper, from MELLING and MOPAR.

This group includes MELLING VSR711, MELLING 4752516 and MOPAR 53021676AB.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts are listed for the 2009 Dodge Viper, from ENGINETECH, MELLING, QUALCAST and 1 other brand.

Listed part numbers: ENGINETECH EPF1083, MELLING VL1083 and QUALCAST 3400515, plus the other parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2009 Dodge Viper come from 5 brands — ENGINETECH, APEX, FEL-PRO and 2 other brands. The "Popular" part is ENGINETECH S802V.

Part numbers include ENGINETECH S802V, APEX AVS2095 and FEL-PRO SS72860, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2009 Dodge Viper come from 5 brands — DORMAN, GATES, SPECTRA PREMIUM and 2 other brands. The "Popular" part is DORMAN 916718.

The Economy section: 4 options from DORMAN, GATES, SPECTRA PREMIUM and 1 other brand. DORMAN 916718 is listed in this group.

Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT285.

Part numbers include DORMAN 916718, GATES VVS297 and SPECTRA PREMIUM VTS1196, among others listed above.