2018 Dodge Challenger Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

29 Camshaft Position Sensor parts for the 2018 Dodge Challenger come from 14 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, HOLSTEIN and 11 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS PC950T. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 18 parts.

This table covers the capacitors used in this electrical or A/C circuit. Read more

2 Condenser / Capacitor parts for the 2018 Dodge Challenger come from 2 brands — MOPAR and WELLS. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Listed part numbers: MOPAR 56028644AC and WELLS 1B1018.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

24 Crankshaft Position Sensor parts for the 2018 Dodge Challenger come from 12 brands — WALKER PRODUCTS, DORMAN, HOLSTEIN and 9 other brands. The "Popular" part is DELPHI SS12198.

The Economy section lists 7 options from HOLSTEIN, SPECTRA PREMIUM, DORMAN and 2 other brands — the catalog's value-priced group. DORMAN 907792 is listed in this group.

In the Standard Replacement grade, WALKER PRODUCTS, DELPHI, MOPAR and 4 other brands supply 15 parts: built to original-equipment specification. A representative part number is DELPHI SS12198.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

40 Ignition Coil parts for the 2018 Dodge Challenger come from 18 brands — STANDARD MOTOR PRODUCTS, NGK, WALKER PRODUCTS and 15 other brands. The "Popular" part is SKP SKIC102. Grades run from Economy through Standard Replacement; Economy is the most populated section, led by STANDARD MOTOR PRODUCTS, SKP, FVP and 6 other brands.

This table covers the Ignition Coil housings. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger.

Part numbers include MOPAR 68190056AE and MOPAR 68186393AD.

This table covers the Remote Starter kits. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 82215693.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

36 Spark Plug parts are listed for the 2018 Dodge Challenger, from NGK, DENSO, BOSCH and 5 other brands. DENSO 5344 carries the "Popular" badge. Copper / Nickel, Double Platinum (lasts up to 3x longer than Copper / Nickel), Iridium (lasts up to 4x longer than Copper / Nickel), Platinum (lasts up to 2x longer than Copper / Nickel) and Ruthenium (maximum durability & ignitability) are all represented, and Iridium (lasts up to 4x longer than Copper / Nickel) alone accounts for 25 parts.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

6 Spark Plug / Ignition Coil Boot parts for the 2018 Dodge Challenger come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and ACDELCO.

The Economy section: 3 options from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS 20481 is listed in this group.

Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS and ACDELCO. A representative part number is ACDELCO 16113.

This group includes STANDARD MOTOR PRODUCTS 20481, STANDARD MOTOR PRODUCTS 20521 and UNITED MOTOR PRODUCTS 9027S and the remaining parts above.

This table covers the gaskets that seal the Spark Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Spark Plug Gasket parts for the 2018 Dodge Challenger come from MOPAR.

This group includes MOPAR 5184778AB and MOPAR 53021569AD.

This table covers the Spark Plug tubes. Read more

2 Spark Plug Tube parts are listed for the 2018 Dodge Challenger, from MELLING and MOPAR.

Listed part numbers: MELLING MSPT12 and MOPAR 5184436AD.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AUTOTECNICA CY1416169.