2018 Dodge Challenger Interior Parts

This table covers the accelerator pedals. Read more

3 Accelerator Pedal parts for the 2018 Dodge Challenger come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

This group includes MOPAR 4861716AF, MOPAR 4861714AH and MOPAR 4861714AD.

This table covers the Accelerator Pedal pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 4861727AB.

This table covers the Accelerator Pedal position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

4 Accelerator Pedal Position Sensor parts are listed for the 2018 Dodge Challenger, from HELLA, STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2018 Challenger.

The Pedal and Sensor Assembly section lists 3 options from HELLA, STANDARD MOTOR PRODUCTS and WELLS — grouped under the catalog's "Pedal and Sensor Assembly" designation — the notes column spells out what sets them apart. HELLA 933966671 is listed in this group.

In the Sensor Only grade, HELLA supplies 1 part: grouped under the catalog's "Sensor Only" designation — the notes column spells out what sets them apart. A representative part number is HELLA 933966681.

Listed part numbers: HELLA 933966671, STANDARD MOTOR PRODUCTS APS425 and WELLS 5S8778, plus the other parts above.

This table covers the 12-volt power outlets in the cabin. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

Part numbers include MOPAR 68476797AB and MOPAR 56046637AA.

This table covers the clocksprings that carry airbag and steering-wheel circuits through the column. Read more

5 Air Bag Clockspring parts for the 2018 Dodge Challenger come from WELLS. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Part numbers include WELLS 1S18031, WELLS 1S18032 and WELLS 1S18033, among others listed above.

This table covers the armrests in the cabin. Read more

MOPAR supplies the 5 Armrest parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes MOPAR 5LE441XCAC, MOPAR 5LE441XWAC and MOPAR 5LE451VXAC and the remaining parts above.

This table covers the brake pedals. Read more

2 Brake Pedal parts for the 2018 Dodge Challenger come from MOPAR. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: MOPAR 4779688AL and MOPAR 68262271AA.

This table covers the Brake Pedal pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

3 Brake Pedal Pad parts are listed for the 2018 Dodge Challenger, from MOPAR and DORMAN. 1 part fits every engine; the other 2 are engine-specific.

This group includes DORMAN 20785, MOPAR 68031956AC and MOPAR 68048939AA.

This table covers the Cargo Area mats. Read more

2 Cargo Area Mat parts for the 2018 Dodge Challenger come from 2 brands — 3D and MOPAR. 1 part fits every engine; the other 1 is engine-specific.

This group includes 3D M1DG026130 and MOPAR 82214926AD.

This table covers the Center consoles. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

Listed part numbers: MOPAR 68260030AB and MOPAR 68260169AB.

This table covers the lids on the center-console bin. Read more

3 Center Console Lid parts for the 2018 Dodge Challenger come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Listed part numbers: MOPAR 5LE49LA8AG, MOPAR 5LE49LR5AG and MOPAR 5LE49LV5AG.

This table covers the sockets a cigarette lighter or 12-volt plug fits. Read more

This group shows a single part: MOPAR 4685590.

This table covers the clutch pedals. Read more

This group shows a single part: MOPAR 68262271AA.

This table covers the brackets that mount the Coat Hook. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 5000080AC.

This table covers the compasses in this cabin. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 5QT76DX9AB.

This table covers the dash vents that direct cabin airflow. Read more

9 Dash Board Air Vent parts for the 2018 Dodge Challenger come from 2 brands — MOPAR and DORMAN. The "Popular" part is DORMAN 2165401. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

This group includes DORMAN 2165401, DORMAN 2165403 and DORMAN 2165402 and the remaining parts above.

This table covers the dash covers that sit over the instrument panel. Read more

6 Dash Board Cover parts for the 2018 Dodge Challenger come from DASH DESIGNS. The "Popular" part is DASH DESIGNS 10970C. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

In the Carpet grade, DASH DESIGNS supplies 1 part: grouped under the catalog's "Carpet" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 10970C.

The Suede section lists 2 options from DASH DESIGNS — grouped under the catalog's "Suede" designation — the notes column spells out what sets them apart. DASH DESIGNS 10970B is listed in this group.

In the Velour grade, DASH DESIGNS supplies 1 part: grouped under the catalog's "Velour" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 10970V.

In the Woven grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Woven" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 10970A.

Listed part numbers: DASH DESIGNS 10970C, DASH DESIGNS 10970B and DASH DESIGNS 10970D, plus the other parts above.

This table covers the Door panels. Read more

MOPAR supplies the 5 Door Panel parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes MOPAR 5LC123X9AH, MOPAR 5LC124X9AH and MOPAR 5LC133X9AH and the remaining parts above.

This table covers the Door Panel retainers and clips. Read more

3 Door Panel Retainer / Clip parts for the 2018 Dodge Challenger come from 2 brands — DORMAN and FAIRCHILD. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Part numbers include DORMAN 963227, DORMAN 700069 and FAIRCHILD C6006.

This table covers the floor mats cut for this cabin. Read more

10 Floor Mat parts are listed for the 2018 Dodge Challenger, from 3D, ACC, DASH DESIGNS and 1 other brand. 3D L1DG0260150 carries the "Popular" badge. 9 parts fit every engine; the other 1 is engine-specific.

The All Weather section lists 3 options from 3D — grouped under the catalog's "All Weather" designation — the notes column spells out what sets them apart. 3D L1DG0260150 is listed in this group.

The Carpet section: 7 options from ACC, DASH DESIGNS, MOPAR and 1 other brand. ACC 18106160 is listed in this group.

This table covers the glove boxes. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 1TM95DX9AH.

This table covers the locks in the glove box. Read more

This group shows a single part: MOPAR 4746315.

This table covers the headliners in the cabin roof. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes MOPAR 6KA86DX9AH and MOPAR 6KA87DX9AD.

This table covers the Hood Release handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

2 Hood Release Handle parts for the 2018 Dodge Challenger come from 2 brands — DORMAN and MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Listed part numbers: DORMAN 46912 and MOPAR 68242432AA.

This table covers the information-display screens in the instrument panel. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes MOPAR 68321851AH and MOPAR 68321853AH.

This table covers the interior rear-view mirrors. Read more

MOPAR supplies the 4 Inside Rear View Mirror parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes MOPAR 68324973AA, MOPAR 68324970AA and MOPAR 68324972AA and the remaining parts above.

This table covers the Inside Rear View Mirror covers. Read more

3 Inside Rear View Mirror Cover parts for the 2018 Dodge Challenger come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Part numbers include MOPAR 1YW16DX9AA, MOPAR 1YW14DX9AC and MOPAR 1YW13DX9AC.

This table covers the Instrument bezels. Read more

4 Instrument Bezel parts for the 2018 Dodge Challenger come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

This group includes MOPAR 5112745AA, MOPAR 5LE101X9AE and MOPAR 5XR501X9AA and the remaining parts above.

This table covers the information and warning labels applied to the vehicle. Read more

MOPAR supplies the 4 Label parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

Listed part numbers: MOPAR 68250254AB, MOPAR 5108000AA and MOPAR 68259899AB, plus the other parts above.

This table covers the microphones for the hands-free or voice system. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 6EP09DX9AA.

This table covers the Overhead consoles. Read more

3 Overhead Console parts for the 2018 Dodge Challenger come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

This group includes MOPAR 1LE17DX9AA, MOPAR 1AH29DX9AB and MOPAR 1AR29DX9AB.

This table covers the Parking Brake Pedal pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes MOPAR 68044148AB and MOPAR 68046409AC.

This table covers the Parking Brake Release handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 1UB95DX9AA.

This table covers the Pedal kits. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 82211154AB.

This table covers the Quarter panels. Read more

MOPAR supplies the 5 Quarter Panel parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

Listed part numbers: MOPAR 1ZA06DX9AD, MOPAR 1ZA07DX9AD and MOPAR 1ZA08DX9AE, plus the other parts above.

This table covers the interfaces that connect an aftermarket radio to the factory harness. Read more

One part is listed for the 2018 Dodge Challenger — METRA AXDSPXCH5.

This table covers the Rain Sensor pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

This group shows a single part: PRECISION RSK1875.

This table covers the Seat Cooling fans. Typical signs include overheating at idle, a fan that never comes on, or a blade that hits the shroud. Confirm the fan command and the relay before replacing the assembly. Read more

This group shows a single part: VDO / CONTINENTAL PM9450.

This table covers the aftermarket and replacement seat covers listed for this cabin. Typical signs include split seams, collapsed foam showing through, or a cover that has shrunk off the bolster. Confirm row and material in the notes; many covers are side- and trim-specific. Read more

DASH DESIGNS supplies the 14 Seat Cover parts for the 2018 Dodge Challenger. DASH DESIGNS K020U40G carries the "Popular" badge. All of them fit every engine offered in the 2018 Challenger.

The Mesh section lists 1 option from DASH DESIGNS — grouped under the catalog's "Mesh" designation — the notes column spells out what sets them apart. DASH DESIGNS K020U40O is listed in this group.

In the Neoprene grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Neoprene" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS K020U40G.

The Neosupreme section lists 4 options from DASH DESIGNS — grouped under the catalog's "Neosupreme" designation — the notes column spells out what sets them apart. DASH DESIGNS K020U40A is listed in this group.

In the Polyester Blend grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Polyester Blend" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS K020U406.

The Tweed section lists 2 options from DASH DESIGNS — grouped under the catalog's "Tweed" designation — the notes column spells out what sets them apart. DASH DESIGNS K020U40S is listed in this group.

The Velour section: 3 options from DASH DESIGNS. DASH DESIGNS K020U407 is listed in this group.

This table covers the speakers in this cabin position. Read more

9 Speaker parts for the 2018 Dodge Challenger come from MOPAR. The "Popular" part is MOPAR 5059062AB. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Listed part numbers: MOPAR 5059062AB, MOPAR 5091020AC and MOPAR 68423513AA, plus the other parts above.

This table covers the Steering wheels. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 6VD87YSAAA.

This table covers the Steering Wheel bezels. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 5SQ19NCCAA.

This table covers the Sun visors. Read more

2 Sun Visor parts for the 2018 Dodge Challenger come from MOPAR. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Listed part numbers: MOPAR 6KM09DX9AA and MOPAR 6KM08DX9AB.

This table covers the brackets that mount the Sun Visor. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 1PF69DX9AA.

This table covers the Sunroof motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Sunroof Motor parts for the 2018 Dodge Challenger come from 2 brands — MOPAR and STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Part numbers include MOPAR 68258828AB and STANDARD MOTOR PRODUCTS PSM148.

This table covers the indicators that show the selected gear. Read more

This group shows a single part: MOPAR 68271181AA.

This table covers the knobs on the shift lever. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

Part numbers include MOPAR 1XM381VXAD and MOPAR 1XM382VXAD.

This table covers the shift levers that select gear. Read more

One part is listed for the 2018 Dodge Challenger — MOPAR 4670709AA.

This table covers the USB / Accessory cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

METRA supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes METRA AXUSBMB and METRA AXUSBMINIB.

This table covers the motors that drive a window regulator. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

4 Window Motor parts for the 2018 Dodge Challenger come from 2 brands — MOPAR and WAI GLOBAL. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Part numbers include MOPAR 68376200AA, MOPAR 68376201AA and WAI GLOBAL 86967, among others listed above.

This table covers the regulators that raise and lower each door glass. Read more

5 Window Regulator parts for the 2018 Dodge Challenger come from 3 brands — DORMAN, MOPAR and WAI GLOBAL. The "Popular" part is DORMAN 752274. Every part fits all 3 engine options (3.6L V6, 5.7L V8 and 6.2L V8 Supercharged).

Listed part numbers: DORMAN 752274, DORMAN 752275 and MOPAR 68043884AA, plus the other parts above.

This table covers combined regulator-and-motor assemblies for a door. Read more

WAI GLOBAL supplies both parts for the 2018 Dodge Challenger. All of them fit every engine offered in the 2018 Challenger.

This group includes WAI GLOBAL 386036 and WAI GLOBAL 386037.