2018 Dodge Challenger Automatic Transmission Parts

This table covers the Automatic Transmission assemblies. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger.

Listed part numbers: MOPAR R8283310AA and MOPAR R8283311AA.

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 2018 Dodge Challenger come from 2 brands — DURA-BOND and PA CARGO.

This group includes DURA-BOND TK33 and PA CARGO K181901.

This table covers the vents on a transmission or axle housing. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger.

This group includes MOPAR 68084188AB and MOPAR 5143951AA.

This table covers the Clutch housings. Read more

This group shows a single part: MOPAR 68271180AA.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

PA CARGO supplies the 8 Clutch Plate parts for the 2018 Dodge Challenger. PA CARGO 181114 carries the "Popular" badge.

Part numbers include PA CARGO 181114, PA CARGO 181102 and PA CARGO 181112, among others listed above.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

8 Clutch Plate Pack parts for the 2018 Dodge Challenger come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 5 parts: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN FRMZF18.

The Steel Plate Pack section lists 3 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMCHRY05 is listed in this group.

Listed part numbers: RAYBESTOS POWERTRAIN FRMZF18, RAYBESTOS POWERTRAIN RGPZ278 and RAYBESTOS POWERTRAIN RHT96283, plus the other parts above.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Extension Housing Seal parts are listed for the 2018 Dodge Challenger, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 710487 and WJB / INMOTION PARTS WS710487.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

9 Filter parts for the 2018 Dodge Challenger come from 5 brands — ELRING, DORMAN, ATP and 2 other brands. The "Popular" part is ELRING 482400.

The Economy section lists 4 options from ELRING and DORMAN — the catalog's value-priced group. ELRING 482400 is listed in this group.

In the Standard Replacement grade, ATP and RAYBESTOS POWERTRAIN supply 4 parts: built to original-equipment specification. A representative part number is ATP B516.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: ELRING 482400, DORMAN 265853F and DORMAN 265850F, plus the other parts above.

This table covers the Flexplate Mounting bolts. Read more

One part is listed for the 2018 Dodge Challenger — DORMAN 14131.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

This group shows a single part: MOPAR 68272789AA.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

7 Fluid Cooler Line / Hose parts for the 2018 Dodge Challenger come from 5 brands — DORMAN, MOPAR, SKP and 2 other brands. The "Popular" part is DORMAN 624441.

This group includes DORMAN 624441, DORMAN 724230 and DORMAN 724225 and the remaining parts above.

This table covers the pans that hold automatic-transmission fluid. Read more

10 Fluid Pan parts are listed for the 2018 Dodge Challenger, from DORMAN, SKP, ZF and 4 other brands. DORMAN 265853 carries the "Popular" badge.

This table covers the Fluid Pan bolts. Read more

3 Fluid Pan Bolt parts for the 2018 Dodge Challenger come from 2 brands — MOPAR and REIN.

Listed part numbers: MOPAR 68233701AA, MOPAR 68233701AC and REIN HWB1068.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Fluid Pan Gasket parts for the 2018 Dodge Challenger come from 5 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ELRING 295540.

This group includes ELRING 295540, FEL-PRO TOS18773 and ELRING 186450 and the remaining parts above.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MOPAR 68373877AA.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 2018 Dodge Challenger, from NATIONAL, PA CARGO and WJB / INMOTION PARTS.

This group includes NATIONAL 710939, PA CARGO 181151 and WJB / INMOTION PARTS WS710939.

This table covers the Input shafts. Read more

This group shows a single part: MOPAR 68283362AB.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2018 Dodge Challenger, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710780 and WJB / INMOTION PARTS WS710780.

This table covers the O-rings and seals at this joint. Read more

ELRING supplies both parts for the 2018 Dodge Challenger.

Listed part numbers: ELRING 428390 and ELRING 490280.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts for the 2018 Dodge Challenger come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710671 and WJB / INMOTION PARTS WS710671.

This table covers the Piston kits. Read more

PA CARGO supplies the 3 Piston Kit parts for the 2018 Dodge Challenger.

Listed part numbers: PA CARGO 92912, PA CARGO 61837A and PA CARGO K18190099.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts are listed for the 2018 Dodge Challenger, from PA CARGO and TRANSTEC.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK18100S.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK18100 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PA CARGO and TRANSTEC supply 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K181900.

This group includes PA CARGO DK18100S, PA CARGO DK18100 and PA CARGO K181900 and the remaining parts above.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

MOPAR supplies both parts for the 2018 Dodge Challenger.

This group includes MOPAR 4670708AA and MOPAR 4670707AA.

This table covers the Shift Improvement kits. Read more

This group shows a single part: SONNAX ZF8ZIP.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Sun Gear Bushing parts for the 2018 Dodge Challenger.

Listed part numbers: DURA-BOND ZFT21BR, DURA-BOND ZFT22 and DURA-BOND ZFT22BR.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

2 Torque Converter parts for the 2018 Dodge Challenger come from MOPAR.

Listed part numbers: MOPAR 52109336AA and MOPAR R2109336AA.

This table covers the Torque Converter bolts. Read more

One part is listed for the 2018 Dodge Challenger — DORMAN 13875.

This table covers the seals at the Torque Converter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: PA CARGO 181150.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts are listed for the 2018 Dodge Challenger, from MOPAR and TIMKEN.

This group includes MOPAR 68234166AA and TIMKEN 710684.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

19 Transmission Fluid parts for the 2018 Dodge Challenger come from 7 brands — PENTOSIN, VALVOLINE, LIQUI MOLY and 4 other brands. The "Popular" part is MOPAR 68218057AC.

The ATF +4 section lists 3 options from PENTOSIN and MOPAR — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. MOPAR 68218057AC is listed in this group.

The Multi-Vehicle section lists 8 options from VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The ZF Fluid section lists 7 options from PENTOSIN and ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058110 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

6 Transmission Fluid Additive parts for the 2018 Dodge Challenger come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts are listed for the 2018 Dodge Challenger, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. ANCHOR 3163 carries the "Popular" badge.

This group includes ANCHOR 3163, DEA / MARMON RIDE CONTROL A5388 and DEA / MARMON RIDE CONTROL A5742 and the remaining parts above.

This table covers the Transmission service kits. Read more

VAICO supplies both parts for the 2018 Dodge Challenger.

The Expert Kit (Basic Kit & Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V330897 is listed in this group.

In the Expert Kit + (Expert Kit and Extra Oil for Rinsing) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V330897XXL.

Listed part numbers: VAICO V330897 and VAICO V330897XXL.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

2 Valve Body parts for the 2018 Dodge Challenger come from MOPAR.

Part numbers include MOPAR 68259337AF and MOPAR R8259301AC.

This table covers the Valve Body sleeves. Read more

This group shows a single part: MOPAR 52854755AA.