2019 Dodge Challenger Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

53 Alternator / Generator parts for the 2019 Dodge Challenger come from 13 brands — REMY, TERREPOWER, MOPAR and 10 other brands. The "Popular" part is MOPAR 4801779AG. New and Remanufactured are all represented, and Remanufactured alone accounts for 32 parts.

This table covers the rectifier diode packs in the alternator. Read more

This group shows a single part: BOSCH 1986AE0614.

This table covers the pulleys on the alternator shaft. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

5 Alternator / Generator Pulley parts are listed for the 2019 Dodge Challenger, from DORMAN, CONTINENTAL and INA. DORMAN 300421 carries the "Popular" badge.

This group includes DORMAN 300421, CONTINENTAL 49941 and CONTINENTAL 49937 and the remaining parts above.

This table covers the Alternator rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness. Read more

This group shows a single part: BOSCH 1986AE0665.

This table covers the Antenna modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

MOPAR supplies both parts for the 2019 Dodge Challenger. All of them fit every engine offered in the 2019 Challenger.

Part numbers include MOPAR 68210666AA and MOPAR 68567038AA.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

8 Battery parts are listed for the 2019 Dodge Challenger, from DEKA, FVP, ACDELCO and 5 other brands. DEKA 9A94R carries the "Popular" badge. All of them fit every engine offered in the 2019 Challenger.

The AGM (Extended Life) section lists 7 options from DEKA, FVP, ACDELCO and 4 other brands — grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. DEKA 9A94R is listed in this group.

The Performance AGM (Extended Life + Increased Power) section lists 1 option from FULLRIVER — grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. FULLRIVER FT85094R is listed in this group.

Part numbers include DEKA 9A94R, FVP P94RAGM and ACDELCO 94RAGM, among others listed above.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

4 Battery Cable parts for the 2019 Dodge Challenger come from MOPAR. 3 parts fit every engine; the other 1 is engine-specific.

This group includes MOPAR 5059001AC, MOPAR 68207017AD and MOPAR 68306895AA and the remaining parts above.

This table covers the Battery Current sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Battery Current Sensor parts for the 2019 Dodge Challenger come from 3 brands — MOPAR, STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).

This group includes MOPAR 56029777AC, STANDARD MOTOR PRODUCTS BSC17 and WELLS 5S15935.

This table covers the covers that protect battery terminals. Read more

MOPAR supplies both parts for the 2019 Dodge Challenger. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: MOPAR 4606858AA and MOPAR 68395741AA.

This table covers the trays the battery sits in. Read more

2 Battery Tray parts are listed for the 2019 Dodge Challenger, from DORMAN and MOPAR. All of them fit every engine offered in the 2019 Challenger.

Part numbers include DORMAN 00079 and MOPAR 5065355AK.

This table covers the Battery Vent tubes. Read more

This group shows a single part: MOPAR 4608914AA.

This table covers the Blind Spot Detection sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: MOPAR 4672783AA.

This table covers the resettable circuit breakers in this vehicle's electrical system. Read more

2 Circuit Breaker parts are listed for the 2019 Dodge Challenger, from BUSSMANN and MOPAR. All of them fit every engine offered in the 2019 Challenger.

Part numbers include BUSSMANN CB21125 and MOPAR 68148874AA.

This table covers the Cruise Control Distance sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

MOPAR supplies both parts for the 2019 Dodge Challenger.

Part numbers include MOPAR 68429538AA and MOPAR 4672763AC.

This table covers the Door control modules. Read more

MOPAR supplies both parts for the 2019 Dodge Challenger. All of them fit every engine offered in the 2019 Challenger.

Part numbers include MOPAR 68353602AB and MOPAR 68353603AB.

This table covers the brackets that mount the Engine Control Module (ECM Computer). Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 5187982AF.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

15 Fuse parts are listed for the 2019 Dodge Challenger, from BUSSMANN and MOPAR. BUSSMANN FMX20LP carries the "Popular" badge. All of them fit every engine offered in the 2019 Challenger.

The 10 Amp section lists 2 options from BUSSMANN and MOPAR — grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM10LP is listed in this group.

In the 15 Amp grade, BUSSMANN and MOPAR supply 2 parts: grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM15LP.

In the 20 Amp grade, BUSSMANN and MOPAR supply 4 parts: grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FMX20LP.

The 25 Amp section lists 1 option from BUSSMANN — grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM25LP is listed in this group.

The 30 Amp section lists 1 option from BUSSMANN — grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX30LP is listed in this group.

In the 40 Amp grade, BUSSMANN and MOPAR supply 2 parts: grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FMX40LP.

The 5 Amp section lists 1 option from BUSSMANN — grouped under the catalog's "5 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM5LP is listed in this group.

The 50 Amp section lists 1 option from BUSSMANN — grouped under the catalog's "50 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX50LP is listed in this group.

In the 60 Amp grade, BUSSMANN supplies 1 part: grouped under the catalog's "60 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FMX60LP.

This table covers the Fuse Box covers. Read more

MOPAR supplies the 4 Fuse Box Cover parts for the 2019 Dodge Challenger. 2 parts fit every engine; the other 2 are engine-specific.

This group includes MOPAR 68304212AA, MOPAR 68430120AA and MOPAR 68430148AA and the remaining parts above.

This table covers the HID Lighting ballasts. Read more

This group shows a single part: DORMAN 601915.

This table covers the horns mounted in the front of the vehicle. Read more

13 Horn parts are listed for the 2019 Dodge Challenger, from FIAMM and MOPAR. FIAMM 72112 carries the "Popular" badge. 12 parts fit every engine; the other 1 is engine-specific.

In the Accessory Replacement grade, FIAMM supplies 5 parts: grouped under the catalog's "Accessory Replacement" designation — the notes column spells out what sets them apart. A representative part number is FIAMM 72112.

The Standard Replacement section lists 8 options from FIAMM and MOPAR — built to original-equipment specification. FIAMM 7421122 is listed in this group.

This table covers the receivers that pick up the key-fob unlock signal. Read more

6 Keyless Entry Module / Receiver parts for the 2019 Dodge Challenger come from MOPAR. The "Popular" part is MOPAR 68051315AB. 5 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: MOPAR 68051315AB, MOPAR 68067753AA and MOPAR 68071978AA, plus the other parts above.

This table covers the key fobs that lock, unlock and start the vehicle. Read more

10 Keyless Entry Remote parts for the 2019 Dodge Challenger come from 2 brands — MOPAR and DORMAN. The "Popular" part is DORMAN 99181ST. 1 part fits every engine; the other 9 are engine-specific.

This table covers the Park Assist (PAS) Camera modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

One part is listed for the 2019 Dodge Challenger — MOPAR 68316627AD.

This table covers the ultrasonic park-aid sensors in the bumper. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

4 Parking Aid Sensor parts for the 2019 Dodge Challenger come from 4 brands — DORMAN, MOPAR, STANDARD MOTOR PRODUCTS and 1 other brand. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).

Listed part numbers: DORMAN 684105, MOPAR 5MK60TZZAC and STANDARD MOTOR PRODUCTS PPS97, plus the other parts above.

This table covers the brackets that mount the Parking Aid Sensor. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 68195848AA.

This table covers the capacitors that suppress radio noise. Read more

One part is listed for the 2019 Dodge Challenger — STANDARD MOTOR PRODUCTS RC33.

This table covers the Rain sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: MOPAR 68194700AB.

This table covers the Rain Sensor retainers and clips. Read more

One part is listed for the 2019 Dodge Challenger — MOPAR 56046617AA.

This table covers the Serial Data Gateway modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

This group shows a single part: MOPAR 68454413AA.