2019 Dodge Challenger Engine Parts

This table covers the camshafts that open the valves. Read more

23 Camshaft parts are listed for the 2019 Dodge Challenger, from MELLING, MOPAR and ENGINETECH. MELLING 23108 carries the "Popular" badge.

In the Heavy Duty / Towing grade, MELLING supplies 1 part: grouped under the catalog's "Heavy Duty / Towing" designation — the notes column spells out what sets them apart. A representative part number is MELLING 23109.

In the High Performance grade, MELLING supplies 6 parts: engineered beyond original-equipment specification. A representative part number is MELLING 23108.

The Standard Replacement section lists 6 options from MOPAR — built to original-equipment specification. MOPAR 53022064BD is listed in this group.

10 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Camshaft Bearing parts are listed for the 2019 Dodge Challenger, from DURA-BOND, ENGINETECH, SEALED POWER and 2 other brands. ENGINETECH CC487 carries the "Popular" badge.

Part numbers include ENGINETECH CC487, SEALED POWER 1935M and DURA-BOND PD41, among others listed above.

This table covers the Camshaft hardware kits. Read more

ENGINETECH supplies both parts for the 2019 Dodge Challenger.

Listed part numbers: ENGINETECH HK120 and ENGINETECH HK1204.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts are listed for the 2019 Dodge Challenger, from MELLING and MOPAR.

Listed part numbers: MELLING MEP334 and MOPAR 6507663AA.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Camshaft Retainer / Thrust Plate parts for the 2019 Dodge Challenger come from 2 brands — MELLING and MOPAR.

This group includes MELLING MD200 and MOPAR 53022178AE.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING B16450.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

17 Connecting Rod Bearing parts are listed for the 2019 Dodge Challenger, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. ENGINETECH BB111J carries the "Popular" badge.

High Performance: 4 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS CR8032XPN.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, ENGINETECH and KING ENGINE BEARINGS. ENGINETECH BB111J is listed in this group.

5 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

4 Connecting Rod Bolt parts for the 2019 Dodge Challenger come from MOPAR.

Part numbers include MOPAR 6509128AA, MOPAR 6506335AA and MOPAR 6508955AA, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

23 Conversion / Lower Gasket Set parts are listed for the 2019 Dodge Challenger, from AJUSA, MOPAR, FEL-PRO and 6 other brands. FEL-PRO CS26541 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

MOPAR supplies the 4 Crankshaft parts for the 2019 Dodge Challenger.

Part numbers include MOPAR 5184251AI, MOPAR 4893356AA and MOPAR 5038339AE, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

20 Crankshaft Main Bearing parts for the 2019 Dodge Challenger come from 4 brands — MOPAR, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand. The "Popular" part is KING ENGINE BEARINGS MB5840XP.

The High Performance section: 3 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB5840XP is listed in this group.

Standard Replacement: 9 parts, from MOPAR, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. A representative part number is ENGINETECH BC115J.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2019 Dodge Challenger — ARP 2445400.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 2019 Dodge Challenger — VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2019 Dodge Challenger come from 5 brands — WJB / INMOTION PARTS, BCA, FEL-PRO and 2 other brands.

This group includes BCA NS99177, FEL-PRO 16230 and MAHLE / CLEVITE A351 and the remaining parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts for the 2019 Dodge Challenger come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16328 and VICTOR REINZ 711620300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

34 Crankshaft Seal parts for the 2019 Dodge Challenger come from 11 brands — NATIONAL, APEX, MOPAR and 8 other brands. The "Popular" part is APEX ABS1312. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 Dodge Challenger — ELRING 907600.

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2019 Dodge Challenger — MELLING MEP337.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Cylinder Deactivation Solenoid parts for the 2019 Dodge Challenger come from 4 brands — DORMAN, CLOYES, STANDARD MOTOR PRODUCTS and 1 other brand. The "Popular" part is DORMAN 916592XD.

Listed part numbers: DORMAN 916592XD, CLOYES VTS237 and DORMAN 916593, plus the other parts above.

This table covers the cylinder heads that close the top of the block. Read more

9 Cylinder Head parts for the 2019 Dodge Challenger come from MOPAR.

Listed part numbers: MOPAR R3620112AA, MOPAR R3602014AA and MOPAR 68141352AE, plus the other parts above.

This table covers the Cylinder Head Alignment Dowel pins. Read more

MOPAR supplies both parts for the 2019 Dodge Challenger.

Listed part numbers: MOPAR 6100997 and MOPAR 5203466.

This table covers the bolts that clamp the cylinder head to the block. Read more

13 Cylinder Head Bolt parts are listed for the 2019 Dodge Challenger, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 6 other brands. ENGINETECH HB228 carries the "Popular" badge.