2019 Dodge Charger Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

20 Coolant / Antifreeze parts are listed for the 2019 Dodge Charger, from PRESTONE, VALVOLINE, PEAK and 3 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2019 Charger.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK, PRESTONE and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Heavy Duty section lists 1 option from VALVOLINE — rated for severe service. VALVOLINE ZXG051 is listed in this group.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 9 options from VALVOLINE, PRESTONE, ACDELCO and 3 other brands — built to original-equipment specification. ACDELCO 105027 is listed in this group.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

7 Coolant Hose / Pipe parts are listed for the 2019 Dodge Charger, from MOPAR and CONTINENTAL. MOPAR 68259405AA carries the "Popular" badge.

Part numbers include MOPAR 68259405AA, CONTINENTAL 64719 and MOPAR 5181872AC, among others listed above.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING B63130.

This table covers the Coolant Hose Connector flanges. Read more

One part is listed for the 2019 Dodge Charger — DORMAN 47297.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

12 Coolant Reservoir parts for the 2019 Dodge Charger come from 7 brands — MOPAR, TECHPRO, GPD and 4 other brands. The "Popular" part is DORMAN 603380.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

10 Coolant Reservoir Cap parts for the 2019 Dodge Charger come from 2 brands — MOTORAD and DORMAN. The "Popular" part is MOTORAD ST18. 1 part fits every engine; the other 9 are engine-specific.

In the Locking Replacement grade, MOTORAD supplies 4 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is MOTORAD ST18.

Standard Replacement: 2 parts, from MOTORAD. A representative part number is MOTORAD T18.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers the adapters used to pressure-test this cooling system. Read more

One part is listed for the 2019 Dodge Charger — MOTORAD 3003.

This table covers the Hose clamps. Read more

MOPAR supplies the 9 Hose Clamp parts for the 2019 Dodge Charger. MOPAR 55056415AA carries the "Popular" badge.

Listed part numbers: MOPAR 55056415AA, MOPAR 52005580 and MOPAR 4809147AA, plus the other parts above.

This table covers the intercoolers that cool turbo or supercharger charge air. Read more

One part is listed for the 2019 Dodge Charger — MOPAR 68190237AA.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

33 Radiator parts are listed for the 2019 Dodge Charger, from AGILITY, DENSO, MOPAR and 10 other brands. ULTRA-POWER 13157 carries the "Popular" badge. Economy, Premium (All Aluminum Construction) and Standard Replacement are all represented, and Standard Replacement alone accounts for 18 parts.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

8 Radiator Cap parts are listed for the 2019 Dodge Charger, from MOPAR, SKP and CALORSTAT. CALORSTAT RC0151 carries the "Popular" badge.

The Locking Replacement section: 1 option from SKP. SKP SKST18 is listed in this group.

The Standard Replacement section: 4 options from MOPAR, CALORSTAT and SKP. CALORSTAT RC0151 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: CALORSTAT RC0151, SKP SKST18 and MOPAR 5278767AB, plus the other parts above.

This table covers the petcocks used to drain the radiator. Read more

This group shows a single part: DORMAN 61134.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

18 Radiator Fan Assembly parts for the 2019 Dodge Charger come from 9 brands — GPD, FOUR SEASONS, UAC and 6 other brands. The "Popular" part is SKP SK621526. 4 parts fit every engine; the other 14 are engine-specific.

The Economy section: 6 options from GPD, VARIOUS MFR and SKP. SKP SK621526 is listed in this group.

Premium: 2 parts, from DORMAN. A representative part number is DORMAN 620039XD.

Standard Replacement: 10 parts, from FOUR SEASONS, UAC, VDO / CONTINENTAL and 2 other brands. A representative part number is FOUR SEASONS 76387.

This table covers the Radiator Fan blades. Typical signs include chatter, streaks, or a skip at the top of the stroke. Confirm left and right lengths in the notes — they are often different. Read more

This group shows a single part: MOPAR 5137713AA.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

4 Radiator Fan Motor parts are listed for the 2019 Dodge Charger, from MOPAR, GPD and VEMO. 3 parts fit every engine; the other 1 is engine-specific.

This group includes GPD 2312234, MOPAR 5072330AB and MOPAR 5137714AA and the remaining parts above.

This table covers the shrouds that duct air through the fan and radiator. Read more

One part is listed for the 2019 Dodge Charger — MOPAR 68050294AC.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

32 Radiator Hose parts for the 2019 Dodge Charger come from 6 brands — MOPAR, CONTINENTAL, DAYCO and 3 other brands. The "Popular" part is DAYCO 72282. A list this long means Radiator Hose applications vary by configuration — the notes carry the qualifiers.

This table covers the Radiator insulators. Read more

2 Radiator Insulator parts for the 2019 Dodge Charger come from TECHPRO. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).

Part numbers include TECHPRO CH3013100 and TECHPRO CH3013102.

This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: DORMAN 927290.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Radiator Mount Bushing parts for the 2019 Dodge Charger come from MOPAR. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).

Part numbers include MOPAR 4596474AD and MOPAR 68017994AA.

This table covers the seals at the Radiator. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Radiator Seal parts for the 2019 Dodge Charger come from MOPAR. The "Popular" part is MOPAR 68026556AA. 10 parts fit every engine; the other 1 is engine-specific.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

16 Temperature Sender / Sensor parts are listed for the 2019 Dodge Charger, from GPD, UNITED MOTOR PRODUCTS, MOPAR and 9 other brands. BECK/ARNLEY 1581735 carries the "Popular" badge. 5 parts fit every engine; the other 11 are engine-specific.

Economy: 7 parts, from GPD, UNITED MOTOR PRODUCTS, DORMAN and 2 other brands. A representative part number is DORMAN 926427.

The Standard Replacement section: 9 options from MOPAR, WELLS, BECK/ARNLEY and 4 other brands. BECK/ARNLEY 1581735 is listed in this group.