The 2019 Dodge Charger has 144 drivetrain parts with verified fitment on this page — 29 part types and 25 brands, covering all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8). Each part includes a manufacturer part number and application notes.
On the 2019 Dodge Charger, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are CV Axle (41 parts), Drive Shaft (18 parts) and Gear Oil (16 parts). The other 26 part types cover the remaining 69 parts.
The 2019 Dodge Charger was sold with 4 engines. 23 parts fit every engine; the other 121 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2019 Dodge Charger drivetrain parts are MOPAR (51 parts), ELRING (9 parts) and TOP NOTCH (9 parts), plus 22 more brands. Quality grades include Standard Replacement and Economy.
19 parts on this 2019 Dodge Charger page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including TIMKEN SL260185 (Axle Shaft Seal) and FAMOUS BRAND NCV479097 (CV Axle). Click any part number to see every vehicle that part fits.
4WD Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6, 5.7L V8 | TCA118 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
One part is listed for the 2019 Dodge Charger — STANDARD MOTOR PRODUCTS TCA118.
Axle / Differential Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 68159834AH | 🇺🇸 US 🇨🇦 CA | Fits Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68159836AH | 🇺🇸 US 🇨🇦 CA | Fits Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68185924AG | 🇺🇸 US 🇨🇦 CA | Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | 68427793AA | 🇺🇸 US 🇨🇦 CA | RearHEMI SRT Engine | View on Amazon |
| MOPAR Fits: 6.4L V8 | 68427796AA | 🇺🇸 US 🇨🇦 CA | RearSRT HEMI MDS Engine | View on Amazon |
This table covers the Axle / Differential assemblies.
MOPAR supplies the 5 Axle / Differential Assembly parts for the 2019 Dodge Charger.
Part numbers include MOPAR 68159834AH, MOPAR 68159836AH and MOPAR 68185924AG, among others listed above.
Axle Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 5143949AA | 🇺🇸 US 🇨🇦 CA | FrontSEDAN | View on Amazon |
This table covers the Axle housings.
This group shows a single part: MOPAR 5143949AA.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Popular Fits: 3.6L V6, 5.7L V8 | SL260185 | 🇺🇸 US 🇨🇦 CA | Front RightAWD | View on Amazon |
| TIMKEN Popular Fits: 3.6L V6 | SL260192 | 🇺🇸 US 🇨🇦 CA | Fits Rear RightPursuit | View on Amazon |
| ELRING Fits: 3.6L V6, 5.7L V8 | B12920 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front | View on Amazon |
| TIMKEN Fits: 3.6L V6 | SL260181 | 🇺🇸 US 🇨🇦 CA | Fits Rear LeftPursuit | View on Amazon |
| TIMKEN Fits: 3.6L V6, 5.7L V8 | SL260186 | 🇺🇸 US 🇨🇦 CA | Front LeftAWD | View on Amazon |
| TIMKEN Fits: all 2019 Charger engines | SL260465 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear RightPursuit | View on Amazon |
| TIMKEN Fits: all 2019 Charger engines | SL260468 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear LeftPursuit | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Axle Shaft Seal parts for the 2019 Dodge Charger come from 2 brands — TIMKEN and ELRING. The "Popular" part is TIMKEN SL260185. 2 parts fit every engine; the other 5 are engine-specific.
Listed part numbers: TIMKEN SL260185, TIMKEN SL260192 and ELRING B12920, plus the other parts above.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FAMOUS BRAND Popular Fits: 3.6L V6, 5.7L V8, 6.4L V8 | NCV479097 | 🇺🇸 US 🇨🇦 CA | RightFRONT | View on Amazon |
| FAMOUS BRAND Popular Fits: 3.6L V6, 5.7L V8, 6.4L V8 | NCV479098 | 🇺🇸 US 🇨🇦 CA | LeftFRONT | View on Amazon |
| CARDONE Fits: 3.6L V6, 5.7L V8 | 603557 | 🇺🇸 US 🇨🇦 CA | RemanufacturedIncludes Rubber Coated ABS Ring | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOP NOTCH Popular Fits: 3.6L V6, 5.7L V8 | TN30049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| TOP NOTCH Popular Fits: 3.6L V6, 5.7L V8 | TN30050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| TRAKMOTIVE Popular Fits: 3.6L V6, 5.7L V8 | MI8171 | 🇺🇸 US 🇨🇦 CA | Front LeftAWD | View on Amazon |
| TRAKMOTIVE Popular Fits: 3.6L V6, 5.7L V8 | MI8172 | 🇺🇸 US 🇨🇦 CA | Front RightAWD | View on Amazon |
| TRAKMOTIVE Popular Fits: 6.4L V8 | CH8304 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APWI Fits: 3.6L V6, 5.7L V8 | CH8383 | 🇺🇸 US 🇨🇦 CA | Front RightAWD | View on Amazon |
| GSP Fits: 3.6L V6, 5.7L V8 | NCV12508 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| GSP Fits: 3.6L V6, 5.7L V8 | NCV12509 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| GSP Fits: 3.6L V6 | NCV12063 | 🇺🇸 US 🇨🇦 CA | RearRWD | View on Amazon |
| GSP Fits: 3.6L V6 | NCV12077 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| GSP Fits: 3.6L V6, 5.7L V8 | NCV12137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearPursuit | View on Amazon |
| GSP Fits: 5.7L V8 | NCV12138 | 🇺🇸 US | RearAWD | View on Amazon |
| GSP Fits: 6.4L V8 | NCV12113 | 🇺🇸 US | Rear Left | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8, 6.4L V8 | R4578600AA | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8, 6.4L V8 | R4578601AA | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8, 6.4L V8 | 68545641AA | 🇺🇸 US 🇨🇦 CA | Front LeftAWD | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8, 6.4L V8 | 68545640AA | 🇺🇸 US 🇨🇦 CA | RightFront | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8, 6.4L V8 | 4578601AA | 🇺🇸 US 🇨🇦 CA | Front LeftAWD | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8, 6.4L V8 | 4578600AA | 🇺🇸 US 🇨🇦 CA | RightFront | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68277002AA | 🇺🇸 US 🇨🇦 CA | Fits LeftRear | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8 | 52123962AD | 🇺🇸 US 🇨🇦 CA | Fits LeftRear | View on Amazon |
| MOPAR Fits: 3.6L V6 | 52123958AD | 🇺🇸 US 🇨🇦 CA | Fits LeftRear | View on Amazon |
| MOPAR Fits: 6.4L V8 | 53010749AA | 🇺🇸 US 🇨🇦 CA | LeftRear | View on Amazon |
| TOP NOTCH Fits: 3.6L V6 | TN30023 | 🇺🇸 US 🇨🇦 CA | RearRWD | View on Amazon |
| TOP NOTCH Fits: 3.6L V6 | TN30031 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| TOP NOTCH Fits: 3.6L V6, 5.7L V8 | TN30118 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearPursuit | View on Amazon |
| TOP NOTCH Fits: 6.4L V8 | TN30116 | 🇺🇸 US | Rear Left | View on Amazon |
| TRAKMOTIVE Fits: 3.6L V6, 5.7L V8 | CH86005 | 🇺🇸 US 🇨🇦 CA | AAR Joint Design | View on Amazon |
| TRAKMOTIVE Fits: 3.6L V6 | CH8308 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| TRAKMOTIVE Fits: 3.6L V6, 5.7L V8 | CH8307 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearRWD | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: 6.2L V8 Supercharged | 53010749AA | 🇺🇸 US 🇨🇦 CA | LeftRear | View on Amazon |
| TRAKMOTIVE Popular Fits: 6.2L V8 Supercharged | CH8304 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | R4578600AA | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | R4578601AA | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | 68545641AA | 🇺🇸 US 🇨🇦 CA | Front LeftOption Group | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | 68545640AA | 🇺🇸 US 🇨🇦 CA | RightFront | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | 4578601AA | 🇺🇸 US 🇨🇦 CA | Front LeftExcept Option Group | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | 4578600AA | 🇺🇸 US 🇨🇦 CA | RightFront | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
41 CV Axle parts for the 2019 Dodge Charger come from 7 brands — MOPAR, TRAKMOTIVE, GSP and 4 other brands. The "Popular" part is FAMOUS BRAND NCV479097. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 30 parts.
CV Intermediate Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6, 5.7L V8 | 630347 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
This table covers the CV Intermediate shafts.
One part is listed for the 2019 Dodge Charger — DORMAN 630347.
CV Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: all 2019 Charger engines | 40204687 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the constant-velocity joints at each end of a drive axle.
This group shows a single part: AAM 40204687.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 5142215AA | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| MOPAR Fits: all 2019 Charger engines | 5142216AA | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
2 CV Joint Boot parts for the 2019 Dodge Charger come from MOPAR. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).
This group includes MOPAR 5142215AA and MOPAR 5142216AA.
Differential Carrier Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 5143952AA | 🇺🇸 US 🇨🇦 CA | FrontSEDAN | View on Amazon |
This table covers the bearings and races that support the differential carrier.
This group shows a single part: MOPAR 5143952AA.
Differential Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 5143120AA | 🇺🇸 US 🇨🇦 CA | FrontSEDAN | View on Amazon |
This table covers the Differential covers.
One part is listed for the 2019 Dodge Charger — MOPAR 5143120AA.
Differential Cover Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 5143143AA | 🇺🇸 US 🇨🇦 CA | FrontSEDAN | View on Amazon |
This table covers the Differential Cover bolts.
This group shows a single part: MOPAR 5143143AA.
Differential Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: all 2019 Charger engines | B12900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontCarrier Gasket | View on Amazon |
This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING B12900.
Differential Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68242689AA | 🇺🇸 US 🇨🇦 CA | Fits Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68242690AA | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine.24V Rear Isolator On Rear Cradle | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged, 6.4L V8 | 68199993AB | 🇺🇸 US 🇨🇦 CA | RearHEMI SRT Engine. | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged, 6.4L V8 | 68242692AA | 🇺🇸 US 🇨🇦 CA | HEMI SRT Engine.Supercharged HEMI SRT Engine or 6.4L SRT HEMI MDS Engine Rear Isolator On Rear Cradle | View on Amazon |
This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
MOPAR supplies the 4 Differential Mount parts for the 2019 Dodge Charger.
Part numbers include MOPAR 68242689AA, MOPAR 68242690AA and MOPAR 68199993AB, among others listed above.
Differential Pinion Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 3.6L V6, 5.7L V8 | M86610VP | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| SKF Fits: 3.6L V6, 5.7L V8 | M88010VP | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
This table covers the bearings and races on the differential pinion.
SKF supplies both parts for the 2019 Dodge Charger.
Listed part numbers: SKF M86610VP and SKF M88010VP.
Differential Pinion Flange
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68259626AA | 🇺🇸 US 🇨🇦 CA | Includes Dust Shield | View on Amazon |
This table covers the flanges that connect the driveshaft to the differential pinion.
This group shows a single part: MOPAR 68259626AA.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: all 2019 Charger engines | 19877A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2019 Charger engines | WS19877A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear0.315 Width | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Differential Pinion Seal parts for the 2019 Dodge Charger come from 2 brands — SKF and WJB / INMOTION PARTS. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).
This group includes SKF 19877A and WJB / INMOTION PARTS WS19877A.
Differential Pinion Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 5142921AA | 🇺🇸 US 🇨🇦 CA | 1.15mmSedan | View on Amazon |
| MOPAR Fits: all 2019 Charger engines | 5142922AA | 🇺🇸 US 🇨🇦 CA | 1.19mmSedan | View on Amazon |
| MOPAR Fits: all 2019 Charger engines | 5142923AA | 🇺🇸 US 🇨🇦 CA | 1.23mmSedan | View on Amazon |
| MOPAR Fits: all 2019 Charger engines | 5142924AA | 🇺🇸 US 🇨🇦 CA | 1.27mmSedan | View on Amazon |
| MOPAR Fits: all 2019 Charger engines | 5142925AA | 🇺🇸 US 🇨🇦 CA | 1.31mmSedan | View on Amazon |
This table covers the Differential Pinion shims.
5 Differential Pinion Shim parts for the 2019 Dodge Charger come from MOPAR. Every part fits all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8).
Part numbers include MOPAR 5142921AA, MOPAR 5142922AA and MOPAR 5142923AA, among others listed above.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: all 2019 Charger engines | 5161591AA | 🇺🇸 US 🇨🇦 CA | FrontSEDAN | View on Amazon |
| ELRING Fits: 3.6L V6 | B12950 | 🇺🇸 US 🇨🇦 CA | Outside Diameter: 65.2 mmSwirl Type: Alternating Twist | View on Amazon |
| ELRING Fits: 3.6L V6 | B12970 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 13Outside Diameter: 75 mm | View on Amazon |
| ELRING Fits: 3.6L V6, 6.2L V8 Supercharged, 6.4L V8 | B17490 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: AEM (Ethylene Acrylate Rubber)Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.6L V6, 6.2L V8 Supercharged, 6.4L V8 | B17540 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| ELRING Fits: 6.2L V8 Supercharged, 6.4L V8 | B17500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Height [MM]: 9Material: AEM (Ethylene Acrylate Rubber) | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Differential Seal parts are listed for the 2019 Dodge Charger, from ELRING and MOPAR. MOPAR 5161591AA carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.
This group includes MOPAR 5161591AA, ELRING B12950 and ELRING B12970 and the remaining parts above.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.6L V6, 5.7L V8 | SK936400 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| TOP NOTCH Popular Fits: 3.6L V6, 5.7L V8 | TN1239PS | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| DORMAN Fits: 3.6L V6, 5.7L V8 | 936400 | 🇺🇸 US 🇨🇦 CA | Length: 25.5"OE Fix | View on Amazon |
| DORMAN Fits: 3.6L V6 | 986955 | 🇺🇸 US 🇨🇦 CA | Length: 75.75" | View on Amazon |
| DORMAN Fits: 3.6L V6 | 976211 | 🇺🇸 US 🇨🇦 CA | Length: 74.125" | View on Amazon |
| DORMAN Fits: 5.7L V8 | 976991 | 🇺🇸 US 🇨🇦 CA | Length: 70.75" | View on Amazon |
| DORMAN Fits: 6.4L V8 | 986277 | 🇺🇸 US 🇨🇦 CA | Length: 69.5" | View on Amazon |
| GSP Fits: 6.2L V8 Supercharged | PS901875 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2 Piece Shaft | View on Amazon |
| GSP Fits: 6.4L V8 | PS901831 | 🇺🇸 US 🇨🇦 CA | Rear2 Piece Shaft | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68200149AE | 🇺🇸 US 🇨🇦 CA | Front24V VVT Engine. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 52123973AI | 🇺🇸 US 🇨🇦 CA | Fits Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68212029AH | 🇺🇸 US 🇨🇦 CA | Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 5.7L V8 | 52123977AH | 🇺🇸 US 🇨🇦 CA | RearHEMI MDS VVT Engine | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged | 53010693AK | 🇺🇸 US 🇨🇦 CA | RearHEMI SRT Engine. | View on Amazon |
| TOP NOTCH Fits: 6.2L V8 Supercharged | TN1284PS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2 Piece Shaft | View on Amazon |
| TOP NOTCH Fits: 6.4L V8 | TN1265PS | 🇺🇸 US 🇨🇦 CA | Rear2 Piece Shaft | View on Amazon |
| ULTRA-POWER Fits: 6.4L V8 | 936400 | 🇺🇸 US 🇨🇦 CA | 25.5" Long | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.4L V8 | WDS86277 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
18 Drive Shaft parts are listed for the 2019 Dodge Charger, from DORMAN, MOPAR, TOP NOTCH and 4 other brands. SKP SK936400 carries the "Popular" badge.
Drive Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6, 6.2L V8 Supercharged, 6.4L V8 | B15340 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| MOPAR Fits: all 2019 Charger engines | 5143144AA | 🇺🇸 US 🇨🇦 CA | Axle Drive Shaft Seal | View on Amazon |
This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Drive Shaft Seal parts for the 2019 Dodge Charger come from 2 brands — ELRING and MOPAR. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: ELRING B15340 and MOPAR 5143144AA.
Gear Oil
SAE 75W-85
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68232947AC | 🇺🇸 US 🇨🇦 CA | Fits Rear24V VVT Engine. | View on Amazon |
| MOPAR Fits: 6.2L V8 Supercharged, 6.4L V8 | 68083381AA | 🇺🇸 US 🇨🇦 CA | RearHEMI SRT Engine | View on Amazon |
SAE 75W-90
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Popular Fits: 3.6L V6 | 10047 | 🇺🇸 US 🇨🇦 CA | SYNTHETIC SAE 75W-90 GEAR OIL1 qt | View on Amazon |
| MOBIL Popular Fits: 3.6L V6, 5.7L V8 | 104361 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic Gear Lube Limited Slip 75W-901 Quart | View on Amazon |
| VALVOLINE Popular Fits: 3.6L V6 | VV975 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 75W-90 Gear Oil1 Quart | View on Amazon |
| ACDELCO Fits: 3.6L V6 | 104108 | 🇺🇸 US | 1 QuartDexron 75W-90 ACDELCO | View on Amazon |
| IDEMITSU Fits: 5.7L V8, 6.2L V8 Supercharged, 6.4L V8 | 30305024750 | 🇺🇸 US | 75W90 Racing Gear Oil1 Quart | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 10048 | 🇺🇸 US 🇨🇦 CA | Synthetic SAE 75W-90 Gear Oil1 Gallon | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 10072 | 🇺🇸 US 🇨🇦 CA | Synthetic SAE 75W-90 Gear Oil5 Gallon | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 18006 | 🇺🇸 US 🇨🇦 CA | Synthetic SAE 75W-90 Gear Oil6 Gallon | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 889785 | 🇺🇸 US 🇨🇦 CA | Full Synthetic SAE 75W-90 Gear Oil1 Quart Flex Fill | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 882505 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 75W-90 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 723856 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 75W-90 Gear Oil5 Gallon | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| IDEMITSU Fits: 3.6L V6, 5.7L V8 | 30305075750 | 🇺🇸 US | 75W90 Gear Oil1 Quart | View on Amazon |
| VALVOLINE Fits: 6.2L V8 Supercharged, 6.4L V8 | 915052 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-85 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE Fits: 6.2L V8 Supercharged, 6.4L V8 | 915053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-85 Gear Oil1 Quart Flex Fill | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
16 Gear Oil parts for the 2019 Dodge Charger come from 6 brands — VALVOLINE, LUCAS OIL, MOPAR and 3 other brands. The "Popular" part is LUCAS OIL 10047.
The SAE 75W-85 section lists 2 options from MOPAR — grouped under the catalog's "SAE 75W-85" designation — the notes column spells out what sets them apart. MOPAR 68232947AC is listed in this group.
The SAE 75W-90 section lists 11 options from LUCAS OIL, VALVOLINE, MOBIL and 2 other brands — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10047 is listed in this group.
3 further parts sit outside the graded sections, with the same engine-level match.
Transfer Case Control Module
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2019 Charger engines | 68528334AB | 🇺🇸 US 🇨🇦 CA | Active T/Case with Front Axle DisconnectSedan | View on Amazon |
This table covers the Transfer Case control modules.
One part is listed for the 2019 Dodge Charger — MOPAR 68528334AB.
Transfer Case Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68049954AD | 🇺🇸 US 🇨🇦 CA | Quart | View on Amazon |
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68049954AC | 🇺🇸 US 🇨🇦 CA | Quart | View on Amazon |
| VAICO Fits: 3.6L V6, 5.7L V8 | V600432 | 🇺🇸 US 🇨🇦 CA | AWD8 speed trans. | View on Amazon |
This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
3 Transfer Case Fluid parts for the 2019 Dodge Charger come from 2 brands — MOPAR and VAICO.
Part numbers include MOPAR 68049954AD, MOPAR 68049954AC and VAICO V600432.
Transfer Case Input Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 3.6L V6, 5.7L V8 | 99274 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6, 5.7L V8 | WS99274 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface.
2 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2019 Dodge Charger, from NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL 99274 and WJB / INMOTION PARTS WS99274.
Transfer Case Output Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6, 5.7L V8 | 68055317AA | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine.24V | View on Amazon |
This table covers the Transfer Case Output shafts.
One part is listed for the 2019 Dodge Charger — MOPAR 68055317AA.
Transfer Case Output Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 3.6L V6, 5.7L V8 | RB6207 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 3.6L V6, 5.7L V8 | RB6208 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.6L V6, 5.7L V8 | WE61445 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| BCA Fits: 3.6L V6, 5.7L V8 | NB208 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| NATIONAL Fits: 3.6L V6, 5.7L V8 | 207 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| NATIONAL Fits: 3.6L V6, 5.7L V8 | 208 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| SCHAEFFLER Fits: 3.6L V6, 5.7L V8 | 6207 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| SCHAEFFLER Fits: 3.6L V6, 5.7L V8 | 6208C3 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
8 Transfer Case Output Shaft Bearing parts are listed for the 2019 Dodge Charger, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. WJB / INMOTION PARTS RB6207 carries the "Popular" badge.
In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB6207.
The Standard Replacement section lists 6 options from BCA, NATIONAL and SCHAEFFLER — built to original-equipment specification. BCA WE61445 is listed in this group.
Part numbers include WJB / INMOTION PARTS RB6207, WJB / INMOTION PARTS RB6208 and BCA WE61445, among others listed above.
Transfer Case Output Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2019 Charger engines | NS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| NATIONAL Fits: 3.6L V6, 5.7L V8 | 99189 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6, 5.7L V8 | WS99189 | 🇺🇸 US 🇨🇦 CA | Fits RearAWD | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface.
3 Transfer Case Output Shaft Repair Sleeve parts for the 2019 Dodge Charger come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 2 are engine-specific.
Listed part numbers: BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2019 Charger engines | NS710661 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Frontwith Borg Warner 4440 Transfer Case | View on Amazon |
| NATIONAL Fits: 3.6L V6, 5.7L V8 | 710661 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| SCHAEFFLER Fits: all 2019 Charger engines | SS2949 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwithout Boot On Seal | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6, 5.7L V8 | WS710661 | 🇺🇸 US 🇨🇦 CA | Fits FrontAWD | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Transfer Case Output Shaft Seal parts for the 2019 Dodge Charger come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.
Listed part numbers: BCA NS710661, NATIONAL 710661 and SCHAEFFLER SS2949, plus the other parts above.
Transfer Case Shift Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 5.7L V8 | B15430 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: ACM (Polyacrylate) | View on Amazon |
| NATIONAL Fits: 3.6L V6, 5.7L V8 | 330385 | 🇺🇸 US 🇨🇦 CA | AWDwith Borg-Warner 4440 Transfer Case | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6, 5.7L V8 | WS330385 | 🇺🇸 US 🇨🇦 CA | AWDwith Borg-Warner 4440 Transfer Case | View on Amazon |
This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Transfer Case Shift Shaft Seal parts are listed for the 2019 Dodge Charger, from ELRING, NATIONAL and WJB / INMOTION PARTS.
Part numbers include ELRING B15430, NATIONAL 330385 and WJB / INMOTION PARTS WS330385.
Buying Drivetrain Parts for a 2019 Dodge Charger
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and Drive Shaft .
Frequently Asked Questions
How many drivetrain parts fit the 2019 Dodge Charger?
Our catalog currently lists 144 drivetrain parts for the 2019 Dodge Charger across 29 subcategories and 25 brands, covering all 4 engine options (3.6L V6, 5.7L V8, 6.2L V8 Supercharged and 6.4L V8). Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2019 Dodge Charger engines?
Some do. 23 parts fit every engine; the other 121 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2019 Dodge Charger?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Dodge Charger was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 Dodge Charger?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 Dodge Charger
Drivetrain Parts for Other Dodge Charger Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.