2020 Dodge Challenger Electrical Connector Parts

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2020 Dodge Challenger, from HOLSTEIN and STANDARD MOTOR PRODUCTS.

Part numbers include HOLSTEIN 2HAR0060 and STANDARD MOTOR PRODUCTS S2316.

This table covers the harness connectors at the A/C Refrigerant Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 ABS Wheel Speed Sensor Connector parts for the 2020 Dodge Challenger come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and ACDELCO PT2160, plus the other parts above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1478.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Alternator / Generator Connector parts for the 2020 Dodge Challenger come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2HAR0035 and STANDARD MOTOR PRODUCTS S2895.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Ambient Air Temperature Sensor Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS HP4215, STANDARD MOTOR PRODUCTS S820 and WELLS 1P1311.

This table covers the harness connectors at the Battery Current Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1686.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Blower Motor Control Module / Resistor Connector parts are listed for the 2020 Dodge Challenger, from STANDARD MOTOR PRODUCTS, FOUR SEASONS, HOLSTEIN and 1 other brand. GPD 1713422 carries the "Popular" badge.

This group includes GPD 1713422, STANDARD MOTOR PRODUCTS S1353 and FOUR SEASONS 37274 and the remaining parts above.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 6 Body Wiring Harness / Connector parts for the 2020 Dodge Challenger. MOPAR 68361697AC carries the "Popular" badge.

This group includes MOPAR 68361697AC, MOPAR 5035580AA and MOPAR 5035581AA and the remaining parts above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Challenger — STANDARD MOTOR PRODUCTS S2374.

This table covers the harness connectors at the Brake Pedal. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Challenger — STANDARD MOTOR PRODUCTS S2374.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Camshaft Position Sensor Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S2278 and WALKER PRODUCTS 2701145.

This table covers the harness connectors at the Cigarette Lighter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Challenger — WELLS 1P1528.

This table covers the harness connectors at the Controller Area Network (CAN) Bus. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Controller Area Network (CAN) Bus Connector parts for the 2020 Dodge Challenger come from 2 brands — DORMAN and MOPAR.

Part numbers include DORMAN 601314, DORMAN 601309 and MOPAR 68084589AA.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2916 and WALKER PRODUCTS 2701145.

This table covers the harness connectors at the Cruise Control Distance Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Challenger — STANDARD MOTOR PRODUCTS S2863.

This table covers the harness connectors at the Cylinder Deactivation Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Cylinder Deactivation Solenoid Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Engine Block Heater Connector parts for the 2020 Dodge Challenger come from MOPAR.

This group includes MOPAR 68083756AB and MOPAR 68186004AB.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

10 Engine Wiring Harness / Connector parts are listed for the 2020 Dodge Challenger, from MOPAR and DORMAN.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Fuel Injector Connector parts for the 2020 Dodge Challenger come from 4 brands — STANDARD MOTOR PRODUCTS, WELLS, GB REMANUFACTURING and 1 other brand. The "Popular" part is WELLS 1P2047.

Part numbers include WELLS 1P2047, GB REMANUFACTURING 5191 and SKP SKS824, among others listed above.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 11 Headlamp Wiring Harness / Connector parts for the 2020 Dodge Challenger. MOPAR 68259674AB carries the "Popular" badge.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Coil Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2087 and WELLS 1P1801.

This table covers the harness connectors at the Instrument Panel Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Challenger — WELLS 1P1612.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Knock / Detonation Sensor Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and ACDELCO.

Part numbers include ACDELCO PT2164, STANDARD MOTOR PRODUCTS HP3860 and STANDARD MOTOR PRODUCTS S697, among others listed above.

This table covers the harness connectors at the License Plate Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 License Plate Lamp Connector parts are listed for the 2020 Dodge Challenger, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2860 and WELLS 1P4270.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Manifold Pressure (MAP) Sensor Connector parts for the 2020 Dodge Challenger come from 3 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER and WALKER PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S1559, STANDARD MOTOR PRODUCTS S2816 and ULTRA-POWER 2701095, among others listed above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oil Pressure Sender / Switch Connector parts are listed for the 2020 Dodge Challenger, from HOLSTEIN and STANDARD MOTOR PRODUCTS.

Listed part numbers: HOLSTEIN 2HAR0060 and STANDARD MOTOR PRODUCTS S2316.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2020 Dodge Challenger come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S2848 and STANDARD MOTOR PRODUCTS S2849.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2020 Dodge Challenger — METRA AXACCH5.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2269.

This table covers the harness connectors at the Speaker Amplifier. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: METRA AXABHCH2.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P3645.

This table covers the harness connectors at the Steering Wheel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Steering Wheel Connector parts for the 2020 Dodge Challenger come from MOPAR.

This group includes MOPAR 68436027AA, MOPAR 68240475AA and MOPAR 68436025AA.

This table covers the harness connectors at the Tail Lamp Assembly. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3019.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2409.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Connector parts are listed for the 2020 Dodge Challenger, from CURT and TEKONSHA.

Listed part numbers: CURT 56230 and TEKONSHA 118656.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Purge Valve / Solenoid Connector parts for the 2020 Dodge Challenger come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Leak Detection Pump Connector parts for the 2020 Dodge Challenger come from 2 brands — STANDARD MOTOR PRODUCTS and ROSTRA.

Listed part numbers: ROSTRA 610161, STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3082.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1423.