2020 Dodge Challenger Automatic Transmission Parts

This table covers the Bushing kits. Read more

2 Bushing Kit parts are listed for the 2020 Dodge Challenger, from DURA-BOND and PA CARGO.

This group includes DURA-BOND TK33 and PA CARGO K181901.

This table covers the transmission or transfer-case housings. Read more

One part is listed for the 2020 Dodge Challenger — MOPAR 68399348AB.

This table covers the vents on a transmission or axle housing. Read more

2 Case Vent parts for the 2020 Dodge Challenger come from MOPAR.

This group includes MOPAR 68084188AB and MOPAR 5143951AA.

This table covers the Clutch housings. Read more

One part is listed for the 2020 Dodge Challenger — MOPAR 68271180AA.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

8 Clutch Plate parts for the 2020 Dodge Challenger come from PA CARGO. The "Popular" part is PA CARGO 181114.

This group includes PA CARGO 181114, PA CARGO 181102 and PA CARGO 181112 and the remaining parts above.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies the 8 Clutch Plate Pack parts for the 2020 Dodge Challenger. RAYBESTOS POWERTRAIN RGPZ018 carries the "Popular" badge.

The Friction Plate Pack section lists 4 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RGPZ018 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 4 parts: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMZF19.

Listed part numbers: RAYBESTOS POWERTRAIN RGPZ018, RAYBESTOS POWERTRAIN FRMZF20 and RAYBESTOS POWERTRAIN RHT96312, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

8 Filter parts are listed for the 2020 Dodge Challenger, from ELRING, RAYBESTOS POWERTRAIN, DORMAN and 3 other brands. ELRING 482400 carries the "Popular" badge.

In the Economy grade, ELRING and DORMAN supply 3 parts: the catalog's value-priced group. A representative part number is ELRING 482400.

The Standard Replacement section lists 4 options from RAYBESTOS POWERTRAIN, MOPAR and ATP — built to original-equipment specification. MOPAR 68266725AA is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include ELRING 482400, DORMAN 265853F and ELRING 444960, among others listed above.

This table covers the Flexplate Mounting bolts. Read more

This group shows a single part: DORMAN 14131.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

One part is listed for the 2020 Dodge Challenger — MOPAR 68272789AA.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

5 Fluid Cooler Line / Hose parts are listed for the 2020 Dodge Challenger, from MOPAR and SUNSONG.

This group includes MOPAR 68252508AE, MOPAR 5181888AD and MOPAR 68257077AD and the remaining parts above.

This table covers the pans that hold automatic-transmission fluid. Read more

7 Fluid Pan parts for the 2020 Dodge Challenger come from 6 brands — MOPAR, DORMAN, SKP and 3 other brands. The "Popular" part is DORMAN 265853.

Part numbers include DORMAN 265853, SKP SK265853 and MOPAR 68261170AA, among others listed above.

This table covers the Fluid Pan bolts. Read more

One part is listed for the 2020 Dodge Challenger — REIN HWB1068.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Fluid Pan Gasket parts are listed for the 2020 Dodge Challenger, from ELRING, MOPAR, FEL-PRO and 1 other brand. ELRING 295540 carries the "Popular" badge.

This group includes ELRING 295540, FEL-PRO TOS18773 and ELRING 186450 and the remaining parts above.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 2020 Dodge Challenger come from 2 brands — MOPAR and PA CARGO.

Part numbers include MOPAR 68261369AA, MOPAR 68419200AA and PA CARGO 181151.

This table covers the O-rings and seals at this joint. Read more

2 O-Rings & Seals parts for the 2020 Dodge Challenger come from ELRING.

Part numbers include ELRING 428390 and ELRING 490280.

This table covers the Output shafts. Read more

This group shows a single part: MOPAR 68271189AA.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts are listed for the 2020 Dodge Challenger, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710671 and WJB / INMOTION PARTS WS710671.

This table covers the Piston kits. Read more

3 Piston Kit parts for the 2020 Dodge Challenger come from PA CARGO.

Listed part numbers: PA CARGO 92912, PA CARGO 61837A and PA CARGO K18190099.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts for the 2020 Dodge Challenger come from 2 brands — PA CARGO and TRANSTEC.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK18100S is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK18100.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from PA CARGO and TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K181900 is listed in this group.

Part numbers include PA CARGO DK18100S, PA CARGO DK18100 and PA CARGO K181900, among others listed above.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Sun Gear Bushing parts for the 2020 Dodge Challenger come from DURA-BOND.

This group includes DURA-BOND ZFT21BR, DURA-BOND ZFT22 and DURA-BOND ZFT22BR.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

MOPAR supplies the 5 Torque Converter parts for the 2020 Dodge Challenger.

This group includes MOPAR RL404379AA, MOPAR RL261592AA and MOPAR RL378429AB and the remaining parts above.

This table covers the Torque Converter bolts. Read more

2 Torque Converter Bolt parts for the 2020 Dodge Challenger come from 2 brands — ARP and DORMAN.

Listed part numbers: ARP 1477301 and DORMAN 13875.

This table covers the seals at the Torque Converter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Dodge Challenger — PA CARGO 181150.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

19 Transmission Fluid parts are listed for the 2020 Dodge Challenger, from PENTOSIN, VALVOLINE, LIQUI MOLY and 4 other brands. MOPAR 68218057AC carries the "Popular" badge.

In the ATF +4 grade, PENTOSIN and MOPAR supply 3 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68218057AC.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand supply 8 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the ZF Fluid grade, PENTOSIN and ZF supply 7 parts: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058110.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 6 Transmission Fluid Additive parts for the 2020 Dodge Challenger. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts for the 2020 Dodge Challenger come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

This group includes ANCHOR 3163, DEA / MARMON RIDE CONTROL A5388 and PIONEER 625388 and the remaining parts above.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

MOPAR supplies the 5 Valve Body parts for the 2020 Dodge Challenger.

This group includes MOPAR 68261176AD, MOPAR R8261176AD and MOPAR RL261176AD and the remaining parts above.

This table covers the Valve Body sleeves. Read more

One part is listed for the 2020 Dodge Challenger — MOPAR 68276661AA.