2020 Dodge Neon Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

14 Coolant / Antifreeze parts are listed for the 2020 Dodge Neon, from PRESTONE, PEAK, FVP and 3 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2020 Neon.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK and PRESTONE supply 3 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 4 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 6 options from PRESTONE, VALVOLINE, ACDELCO and 2 other brands — built to original-equipment specification. VALVOLINE ZXEL1 is listed in this group.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

MOPAR supplies both parts for the 2020 Dodge Neon.

This group includes MOPAR 68233520AA and MOPAR 68396318AA.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

This group shows a single part: MOPAR 68327286AA.

This table covers the Hose clamps. Read more

MOPAR supplies the 5 Hose Clamp parts for the 2020 Dodge Neon. 2 parts fit every engine; the other 3 are engine-specific.

Part numbers include MOPAR 6106139AA, MOPAR 68138725AA and MOPAR 6106144AA, among others listed above.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

MOPAR supplies both parts for the 2020 Dodge Neon.

Part numbers include MOPAR 68327753AA and MOPAR 68326040AA.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

This group shows a single part: MOPAR 68327754AA.

This table covers the Radiator Fan resistors. Read more

MOPAR supplies both parts for the 2020 Dodge Neon.

This group includes MOPAR 68256126AA and MOPAR 68202035AA.

This table covers the shrouds that duct air through the fan and radiator. Read more

MOPAR supplies the 4 Radiator Fan Shroud parts for the 2020 Dodge Neon.

Listed part numbers: MOPAR 68326391AA, MOPAR 68327823AA and MOPAR 68326393AA, plus the other parts above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

2 Radiator Hose parts for the 2020 Dodge Neon come from MOPAR.

Listed part numbers: MOPAR 68326383AA and MOPAR 68396317AA.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Radiator Mount Bushing parts for the 2020 Dodge Neon come from MOPAR. Every part fits both the 1.4L L4 and the 1.6L L4.

Part numbers include MOPAR 68354092AA and MOPAR 68326014AA.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

MOPAR supplies both parts for the 2020 Dodge Neon.

This group includes MOPAR 68070744AA and MOPAR 68294906AA.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

2 Thermostat parts for the 2020 Dodge Neon come from MOPAR.

Part numbers include MOPAR 68095128AA and MOPAR 68294880AA.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Dodge Neon — MOPAR 68095375AA.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

6 Water Pump parts for the 2020 Dodge Neon come from 4 brands — FVP, MOPAR, US MOTOR WORKS and 1 other brand.

The Economy section: 2 options from FVP and US MOTOR WORKS. FVP US8136 is listed in this group.

Standard Replacement: 3 parts, from FVP, GMB and MOPAR. A representative part number is FVP 1204480.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include FVP US8136 and FVP 1204480, among others listed above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Dodge Neon — MOPAR 68098371AA.