This page lists 11 suspension parts for the 2020 Dodge Neon, across 7 part types, covering both the 1.4L L4 and the 1.6L L4. Every part shows its brand, manufacturer part number and fitment notes.
On the 2020 Dodge Neon, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. Most of the listed parts are Shock / Strut (4 parts), Control Arm (2 parts) and Ball Joint (1 part). The other 4 part types cover the remaining 4 parts.
The 2020 Dodge Neon was sold with both the 1.4L L4 and the 1.6L L4. 10 parts fit every engine; the other 1 is engine-specific. Each part shows which engine(s) it fits.
3 brands supply suspension parts for the 2020 Dodge Neon, led by MOPAR (6 parts), FCS (3 parts) and DORMAN (2 parts).
Each part number listed for the 2020 Dodge Neon opens a page with every vehicle that part fits.
Ball Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2020 Neon engines | 538381 | 🇲🇽 MX | Front Lower | View on Amazon |
This table covers the ball joints that articulate each control arm at the knuckle.
One part is listed for the 2020 Dodge Neon — DORMAN 538381.
Bump Stop
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2020 Neon engines | 68201095AA | 🇲🇽 MX | Fits FrontMEX/Mid East | View on Amazon |
This table covers the bump stops that limit suspension travel.
This group shows a single part: MOPAR 68201095AA.
Control Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2020 Neon engines | 68385372AA | 🇲🇽 MX | Fits Front Left LowerMEX/Mid East | View on Amazon |
| MOPAR Fits: all 2020 Neon engines | 68385373AA | 🇲🇽 MX | Fits Front Right LowerMEX/Mid East | View on Amazon |
This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.
MOPAR supplies both parts for the 2020 Dodge Neon. All of them fit every engine offered in the 2020 Neon.
Listed part numbers: MOPAR 68385372AA and MOPAR 68385373AA.
Shock / Strut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FCS Fits: all 2020 Neon engines | 346981 | 🇲🇽 MX | Rear | View on Amazon |
| FCS Fits: all 2020 Neon engines | 334009L | 🇲🇽 MX | Front Left | View on Amazon |
| FCS Fits: all 2020 Neon engines | 334009R | 🇲🇽 MX | Front Right | View on Amazon |
| MOPAR Fits: 1.4L L4 | 68369807AA | 🇲🇽 MX | RightFront | View on Amazon |
This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed.
4 Shock / Strut parts are listed for the 2020 Dodge Neon, from FCS and MOPAR. 3 parts fit every engine; the other 1 is engine-specific.
Listed part numbers: FCS 346981, FCS 334009L and FCS 334009R, plus the other parts above.
Shock / Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2020 Neon engines | 68326414AA | 🇲🇽 MX | FrontMEX/Mid East | View on Amazon |
This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: MOPAR 68326414AA.
Shock Dust Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2020 Neon engines | 68329288AA | 🇲🇽 MX | Fits RearMEX/Mid East | View on Amazon |
This table covers the Shock Dust covers.
One part is listed for the 2020 Dodge Neon — MOPAR 68329288AA.
Sway Bar Link
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2020 Neon engines | 542808 | 🇲🇽 MX | Front | View on Amazon |
This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it.
One part is listed for the 2020 Dodge Neon — DORMAN 542808.
Buying Suspension Parts for a 2020 Dodge Neon
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Match the engine first. Some suspension parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Shock / Strut and Control Arm .
Frequently Asked Questions
How many suspension parts fit the 2020 Dodge Neon?
Our catalog currently lists 11 suspension parts for the 2020 Dodge Neon across 7 subcategories and 3 brands, covering both the 1.4L L4 and the 1.6L L4. Each part is matched to the engine(s) it fits.
Do suspension parts differ between 2020 Dodge Neon engines?
Some do. 10 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of suspension problems on a 2020 Dodge Neon?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Dodge Neon was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Dodge Neon?
First match the engine — each row shows which engine(s) the part fits. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Dodge Neon
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.