13 Ignition parts are listed for the 2020 Dodge Neon, in 8 part types, covering both the 1.4L L4 and the 1.6L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 2020 Dodge Neon delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Camshaft Position Sensor (3 parts), Crankshaft Position Sensor (2 parts) and Spark Plug (2 parts). The other 5 part types cover the remaining 6 parts.
The 2020 Dodge Neon was sold with both the 1.4L L4 and the 1.6L L4. 1 part fits every engine; the other 12 are engine-specific. Each part shows which engine(s) it fits.
3 brands supply ignition parts for the 2020 Dodge Neon, led by MOPAR (10 parts), STANDARD MOTOR PRODUCTS (2 parts) and WALKER PRODUCTS (1 part).
Each part number listed for the 2020 Dodge Neon opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 1.4L L4 | 68097616AA | 🇲🇽 MX | MEX/Mid EastFire 16V Engine | View on Amazon |
| MOPAR Fits: 1.6L L4 | 68294879AA | 🇲🇽 MX | MEX or Mid EastE-Torque Engine | View on Amazon |
| WALKER PRODUCTS Fits: 1.4L L4 | 2351701 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Camshaft Position Sensor parts for the 2020 Dodge Neon come from 2 brands — MOPAR and WALKER PRODUCTS.
This group includes MOPAR 68097616AA, MOPAR 68294879AA and WALKER PRODUCTS 2351701.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 1.4L L4 | 56028644AC | 🇲🇽 MX | MEX/Mid EastFire 16V Engine | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
This group shows a single part: MOPAR 56028644AC.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 1.4L L4 | 68097665AA | 🇲🇽 MX | MEX/Mid EastFire 16V Engine | View on Amazon |
| MOPAR Fits: 1.6L L4 | 68294903AA | 🇲🇽 MX | MEX or Mid EastE-Torque Engine | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Crankshaft Position Sensor parts for the 2020 Dodge Neon come from MOPAR.
This group includes MOPAR 68097665AA and MOPAR 68294903AA.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 1.4L L4 | 68093722AA | 🇲🇽 MX | MEX/Mid EastFire 16V Engine | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
This group shows a single part: MOPAR 68093722AA.
Immobilizer Antenna
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2020 Neon engines | 68201733AC | 🇲🇽 MX | MEX/Mid EastSedan/Quad Cab Short Wheelbase | View on Amazon |
This table covers the Immobilizer antennas.
This group shows a single part: MOPAR 68201733AC.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 1.4L L4 | SP070500AA | 🇲🇽 MX | MEX/Mid EastFire 16V Engine | View on Amazon |
| MOPAR Fits: 1.6L L4 | 68294899AA | 🇲🇽 MX | MEX or Mid EastE-Torque Engine | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
MOPAR supplies both parts for the 2020 Dodge Neon.
This group includes MOPAR SP070500AA and MOPAR 68294899AA.
Spark Plug Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 1.6L L4 | 68263697AA | 🇲🇽 MX | MEX or Mid EastE-Torque Engine | View on Amazon |
This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MOPAR 68263697AA.
Spark Plug Wire
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.6L L4 | 3873 | 🇲🇽 MX | Set | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.6L L4 | 9562 | 🇲🇽 MX | Set | View on Amazon |
This table covers the Spark Plug wires.
2 Spark Plug Wire parts for the 2020 Dodge Neon come from STANDARD MOTOR PRODUCTS.
This group includes STANDARD MOTOR PRODUCTS 3873 and STANDARD MOTOR PRODUCTS 9562.
Buying Ignition Parts for a 2020 Dodge Neon
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2020 Dodge Neon?
Our catalog currently lists 13 ignition parts for the 2020 Dodge Neon across 8 subcategories and 3 brands, covering both the 1.4L L4 and the 1.6L L4. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2020 Dodge Neon engines?
Some do. 1 part fits every engine; the other 12 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2020 Dodge Neon?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Dodge Neon was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Dodge Neon?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Dodge Neon
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.