2023 Dodge Challenger Engine Parts

This table covers the camshafts that open the valves. Read more

5 Camshaft parts for the 2023 Dodge Challenger come from 2 brands — MELLING and MOPAR.

The Heavy Duty / Towing section lists 1 option from MELLING — grouped under the catalog's "Heavy Duty / Towing" designation — the notes column spells out what sets them apart. MELLING 23109 is listed in this group.

The High Performance section lists 2 options from MELLING — engineered beyond original-equipment specification. MELLING 23209 is listed in this group.

In the Standard Replacement grade, MOPAR supplies 2 parts: built to original-equipment specification. A representative part number is MOPAR 53022064BD.

Part numbers include MELLING 23109, MELLING 23209 and MELLING 23309, among others listed above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MAHLE / CLEVITE SH2191S.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts for the 2023 Dodge Challenger come from 2 brands — MELLING and MOPAR.

Listed part numbers: MELLING MEP334 and MOPAR 6507663AA.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Camshaft Retainer / Thrust Plate parts are listed for the 2023 Dodge Challenger, from MELLING and MOPAR.

Listed part numbers: MELLING MD200 and MOPAR 53022178AE.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2023 Dodge Challenger come from MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE CB1808A.

The High Performance section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE CB1808HXN is listed in this group.

Standard Replacement: 4 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE CB1808A.

Part numbers include MAHLE / CLEVITE CB1808A, MAHLE / CLEVITE CB1808HXN and MAHLE / CLEVITE CB1808HN, among others listed above.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2023 Dodge Challenger — MOPAR 6506335AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2023 Dodge Challenger come from 2 brands — AJUSA and MOPAR.

Listed part numbers: AJUSA 54320800 and MOPAR 68223389AC.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: MOPAR 4893356AA.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2023 Dodge Challenger, from MOPAR and MAHLE / CLEVITE. MAHLE / CLEVITE MS2296A carries the "Popular" badge.

High Performance: 1 part, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE MS2296H.

The Standard Replacement section: 4 options from MOPAR and MAHLE / CLEVITE. MAHLE / CLEVITE MS2296A is listed in this group.

Part numbers include MAHLE / CLEVITE MS2296A, MAHLE / CLEVITE MS2296H and MOPAR 68102975AB, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2023 Dodge Challenger, from MOPAR, MAHLE / CLEVITE, DORMAN and 2 other brands. MAHLE / CLEVITE JV1720 carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE JV1720, MOPAR 53021585AD and DORMAN 635333, plus the other parts above.

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MELLING MEP337.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

DORMAN supplies both parts for the 2023 Dodge Challenger.

Part numbers include DORMAN 916592XD and DORMAN 916593.

This table covers the cylinder heads that close the top of the block. Read more

MOPAR supplies both parts for the 2023 Dodge Challenger.

Listed part numbers: MOPAR 68280503AF and MOPAR 68280502AF.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: MOPAR 5203466.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2023 Dodge Challenger come from 2 brands — AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 81076700 and MAHLE / CLEVITE GS33429.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts for the 2023 Dodge Challenger come from 5 brands — MOPAR, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO 26423PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 2023 Dodge Challenger come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO HS26423PT.

This group includes FEL-PRO HS26423PT, MAHLE / CLEVITE HS54418B and AJUSA 52602400 and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2023 Dodge Challenger — MOPAR 4556020AB.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2023 Dodge Challenger come from SBI.

This group includes SBI 2302162L and SBI 2302162R.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2023 Dodge Challenger — MOPAR 5149022AC.

This table covers the Engine covers. Read more

12 Engine Cover parts for the 2023 Dodge Challenger come from 3 brands — MOPAR, TECHPRO and VARIOUS MFR. The "Popular" part is MOPAR 68175180AA.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2023 Dodge Challenger come from 2 brands — MOPAR and AJUSA.

This group includes AJUSA 50547400, MOPAR 68294132AB and MOPAR 68294133AE.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2023 Dodge Challenger, from MELLING, MOPAR and SBI.

Part numbers include MELLING V3195, MOPAR 53022088AB and SBI 13195.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 2023 Dodge Challenger come from MOPAR.

Part numbers include MOPAR 68060349AA and MOPAR 6036307AA.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2023 Dodge Challenger come from 4 brands — ATP, DORMAN, MOPAR and 1 other brand.

This group includes ATP 102461, DORMAN 594567 and MOPAR 53022413AA and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2023 Dodge Challenger come from 3 brands — AJUSA, MOPAR and MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE MS19825.

Listed part numbers: MAHLE / CLEVITE MS19825, AJUSA 77045300 and AJUSA 77085300, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2023 Dodge Challenger — AJUSA 01698200.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2023 Dodge Challenger, from MELLING, MOPAR and SBI.

Listed part numbers: MELLING V3194, MOPAR 53022087AD and SBI 13194.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2023 Dodge Challenger, from DEA / MARMON RIDE CONTROL, ANCHOR and PIONEER.

Part numbers include ANCHOR 3262, DEA / MARMON RIDE CONTROL A5522 and DEA / MARMON RIDE CONTROL A20360, among others listed above.

This table covers the Motor Mount bolts. Read more

This group shows a single part: MOPAR 4809963AE.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

MOPAR supplies both parts for the 2023 Dodge Challenger.

This group includes MOPAR 4726016AC and MOPAR 4726017AB.

This table covers the Motor Mount Heat insulators. Read more

This group shows a single part: MOPAR 5090026AA.

This table covers the isolators in an engine mount. Read more

This group shows a single part: MOPAR 68277082AA.

This table covers the Motor Mount kits. Read more

One part is listed for the 2023 Dodge Challenger — ANCHOR 300538.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

28 Oil parts are listed for the 2023 Dodge Challenger, from VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. LIQUI MOLY 2208 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 21 parts from VALVOLINE, LIQUI MOLY, PENTOSIN and 3 other brands.

This table covers the Oil Dipstick tubes. Read more

3 Oil Dipstick / Tube parts are listed for the 2023 Dodge Challenger, from MOPAR and AUTOTECNICA.

Part numbers include AUTOTECNICA CY1423351, MOPAR 53013977AB and MOPAR 4792872AF.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 2023 Dodge Challenger, from DORMAN, MOPAR and SKP. DORMAN 090053 carries the "Popular" badge.

Part numbers include DORMAN 090053, DORMAN 090115 and MOPAR 68174052AB, among others listed above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2023 Dodge Challenger, from MOPAR and MOTORAD.

Part numbers include MOPAR 53013775AC and MOTORAD MO154.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2023 Dodge Challenger, from VARIOUS MFR, WIX, ACDELCO and 10 other brands. CHAMP / LUBER-FINER PH48 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, FRAM, FVP and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH48.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1113A.

The Standard Replacement section: 9 options from ACDELCO, MOPAR, WIX and 4 other brands. ACDELCO PF48 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE 72119.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2023 Dodge Challenger — MOPAR 53034112AA.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2023 Dodge Challenger come from 4 brands — DORMAN, MOPAR, SPECTRA PREMIUM and 1 other brand.

This group includes DORMAN 264354, MOPAR 5037634AA and SPECTRA PREMIUM CRP49A and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2023 Dodge Challenger, from FEL-PRO, AJUSA, MAHLE / CLEVITE and 2 other brands. FEL-PRO OS30761R carries the "Popular" badge.

This group includes FEL-PRO OS30761R, AJUSA 14113900 and MAHLE / CLEVITE OS32269 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

11 Oil Pump parts are listed for the 2023 Dodge Challenger, from MELLING, ENGINETECH, SKP and 2 other brands. ENGINETECH EPK163 carries the "Popular" badge.

Economy: 2 parts, from ENGINETECH and SKP. A representative part number is ENGINETECH EPK163.

High Performance: 3 parts, from MELLING. A representative part number is MELLING 10452HV.

In the High Volume / Pressure grade, MELLING and ENGINETECH supply 2 parts: grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. A representative part number is MELLING M452HV.

The Standard Replacement section: 4 options from ENGINETECH, MELLING, MOPAR and 1 other brand. ENGINETECH EP452 is listed in this group.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts for the 2023 Dodge Challenger come from 2 brands — MELLING and MOPAR.

Part numbers include MELLING 389S and MOPAR 4792857BB.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2023 Dodge Challenger — MOPAR 53020861.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts for the 2023 Dodge Challenger come from 2 brands — MOPAR and SEALED POWER.

In the Premium grade, SEALED POWER supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER H1501CPA.

Standard Replacement: 2 parts, from MOPAR. A representative part number is MOPAR 53022258AE.

This group includes SEALED POWER H1501CPA, MOPAR 53022258AE and MOPAR 53022257AE.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: MOPAR 68046210AB.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

5 Push Rod parts for the 2023 Dodge Challenger come from 3 brands — MELLING, MOPAR and SBI. The "Popular" part is MELLING MPR667.

Part numbers include MELLING MPR667, MELLING MPR668 and MOPAR 5045516AA, among others listed above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

7 Rocker Arm parts are listed for the 2023 Dodge Challenger, from ENGINETECH, MELLING and QUALCAST. MELLING MRK1553E carries the "Popular" badge.

Listed part numbers: MELLING MRK1553E, MELLING MRK1552I and ENGINETECH ERK355, plus the other parts above.

This table covers the Thrust washers. Read more

One part is listed for the 2023 Dodge Challenger — MAHLE / CLEVITE TW611S.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2023 Dodge Challenger come from 5 brands — MELLING, CLOYES, MOPAR and 2 other brands. The "Popular" part is MELLING 750.

Listed part numbers: MELLING 750, CLOYES C750 and MOPAR 53022316AC, plus the other parts above.