2023 Dodge Challenger Automatic Transmission Parts

This table covers the Bushing kits. Read more

This group shows a single part: PA CARGO K181901.

This table covers the transmission or transfer-case housings. Read more

This group shows a single part: MOPAR 68399348AB.

This table covers the vents on a transmission or axle housing. Read more

MOPAR supplies both parts for the 2023 Dodge Challenger.

Part numbers include MOPAR 68084188AB and MOPAR 5143951AA.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

PA CARGO supplies the 8 Clutch Plate parts for the 2023 Dodge Challenger. PA CARGO 181114 carries the "Popular" badge.

Listed part numbers: PA CARGO 181114, PA CARGO 181102 and PA CARGO 181112, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts for the 2023 Dodge Challenger come from 2 brands — ELRING and DORMAN.

This group includes DORMAN 265853F, ELRING 444960 and ELRING 482400.

This table covers the Flexplate Mounting bolts. Read more

One part is listed for the 2023 Dodge Challenger — DORMAN 14131.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

2 Fluid Cooler Line / Hose parts for the 2023 Dodge Challenger come from 2 brands — MOPAR and SUNSONG.

Listed part numbers: MOPAR 68252508AE and SUNSONG 5801755.

This table covers the pans that hold automatic-transmission fluid. Read more

5 Fluid Pan parts are listed for the 2023 Dodge Challenger, from DORMAN, MOPAR, PA CARGO and 2 other brands. DORMAN 265853 carries the "Popular" badge.

Listed part numbers: DORMAN 265853, MOPAR 68261170AA and PA CARGO 181710, plus the other parts above.

This table covers the Fluid Pan bolts. Read more

This group shows a single part: REIN HWB1068.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts for the 2023 Dodge Challenger come from 4 brands — ELRING, FEL-PRO, MOPAR and 1 other brand. The "Popular" part is ELRING 295540.

Part numbers include ELRING 295540, FEL-PRO TOS18773 and ELRING 186450, among others listed above.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts are listed for the 2023 Dodge Challenger, from MOPAR and PA CARGO.

Listed part numbers: MOPAR 68261369AA and PA CARGO 181151.

This table covers the O-rings and seals at this joint. Read more

ELRING supplies both parts for the 2023 Dodge Challenger.

This group includes ELRING 428390 and ELRING 490280.

This table covers the Output shafts. Read more

One part is listed for the 2023 Dodge Challenger — MOPAR 68271189AA.

This table covers the Piston kits. Read more

PA CARGO supplies the 3 Piston Kit parts for the 2023 Dodge Challenger.

This group includes PA CARGO 92912, PA CARGO 61837A and PA CARGO K18190099.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts are listed for the 2023 Dodge Challenger, from PA CARGO and TRANSTEC.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK18100S.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK18100 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PA CARGO and TRANSTEC supply 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K181900.

Listed part numbers: PA CARGO DK18100S, PA CARGO DK18100 and PA CARGO K181900, plus the other parts above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: MOPAR RL404379AA.

This table covers the seals at the Torque Converter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: PA CARGO 181150.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

18 Transmission Fluid parts for the 2023 Dodge Challenger come from 6 brands — PENTOSIN, VALVOLINE, LIQUI MOLY and 3 other brands. The "Popular" part is MOPAR 68218057AC.

The ATF +4 section lists 3 options from PENTOSIN and MOPAR — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. MOPAR 68218057AC is listed in this group.

The Multi-Vehicle section lists 7 options from VALVOLINE, LIQUI MOLY and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The ZF Fluid section lists 7 options from PENTOSIN and ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058110 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

6 Transmission Fluid Additive parts for the 2023 Dodge Challenger come from LUBEGARD. The "Popular" part is LUBEGARD 19610.

This group includes LUBEGARD 19610, LUBEGARD 19689 and LUBEGARD 60902 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts are listed for the 2023 Dodge Challenger, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 3163, DEA / MARMON RIDE CONTROL A5388 and PIONEER 625388, among others listed above.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

2 Valve Body parts for the 2023 Dodge Challenger come from MOPAR.

Listed part numbers: MOPAR 68261176AD and MOPAR RL261176AD.

This table covers the Valve Body sleeves. Read more

This group shows a single part: MOPAR 68276661AA.