1989 Eagle Summit Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MAHLE / CLEVITE SH1465S.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

3 Balance Shaft Repair Sleeve parts are listed for the 1989 Eagle Summit, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99098, SCHAEFFLER SR3458 and WJB / INMOTION PARTS WS99098.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts are listed for the 1989 Eagle Summit, from JAPANESE OE, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: JAPANESE OE KJ413209, JAPANESE OE F4225 and NATIONAL 712007, plus the other parts above.

This table covers the camshafts that open the valves. Read more

TOPLINE supplies both parts for the 1989 Eagle Summit.

Part numbers include TOPLINE CAMMI21E and TOPLINE CAMMI21I.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

DURA-BOND supplies both parts for the 1989 Eagle Summit.

This group includes DURA-BOND MIA1 and DURA-BOND MIA2.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 1989 Eagle Summit come from 5 brands — NATIONAL, BCA, SKF and 2 other brands. The "Popular" part is NATIONAL 99139.

This group includes NATIONAL 99139, BCA NS99139 and SKF 99138 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Camshaft Seal parts for the 1989 Eagle Summit come from 10 brands — FEL-PRO, TIMKEN, AJUSA and 7 other brands. The "Popular" part is FEL-PRO TCS45483.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Circular / Semi-Circular Plug parts for the 1989 Eagle Summit come from 3 brands — APEX, FEL-PRO and VICTOR REINZ.

Listed part numbers: APEX ACP200, FEL-PRO CP75013 and VICTOR REINZ 711349400.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1989 Eagle Summit, from MAHLE / CLEVITE and TOPLINE.

In the High Performance grade, MAHLE / CLEVITE supplies 1 part: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1120HN.

The Standard Replacement section lists 3 options from MAHLE / CLEVITE and TOPLINE — built to original-equipment specification. MAHLE / CLEVITE CB1120A is listed in this group.

Part numbers include MAHLE / CLEVITE CB1120HN, MAHLE / CLEVITE CB1120A and MAHLE / CLEVITE CB1120A4, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 1989 Eagle Summit, from APEX, FEL-PRO, MAHLE / CLEVITE and 2 other brands. APEX ACS2003 carries the "Popular" badge.

Listed part numbers: APEX ACS2003, FEL-PRO CS9086 and MAHLE / CLEVITE CS5875, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TOPLINE MBC17.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1989 Eagle Summit come from 6 brands — BCA, FEL-PRO, SCHAEFFLER and 3 other brands. The "Popular" part is BCA NS99315.

Listed part numbers: BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3549, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts for the 1989 Eagle Summit come from 12 brands — NATIONAL, TIMKEN, WJB / INMOTION PARTS and 9 other brands. The "Popular" part is FEL-PRO BS404081.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 1989 Eagle Summit — TOPLINE HBMI6.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 1989 Eagle Summit, from APEX, FEL-PRO, BECK/ARNLEY and 3 other brands. APEX AHG203S carries the "Popular" badge.

This group includes APEX AHG203S, FEL-PRO 9627PT and APEX AHG203 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 1989 Eagle Summit, from APEX, BECK/ARNLEY, FEL-PRO and 2 other brands. APEX AHS2003 carries the "Popular" badge.

Listed part numbers: APEX AHS2003, BECK/ARNLEY 0322814 and FEL-PRO HS9627PT, plus the other parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: DORMAN 565095.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11411.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 1989 Eagle Summit, from AJUSA, APEX and TOPLINE.

Part numbers include AJUSA 50121900, APEX AFS2003 and TOPLINE CGSMI6.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 1989 Eagle Summit come from 3 brands — SBI, QUALCAST and TOPLINE.

Part numbers include QUALCAST 1010128, SBI 10128A and SBI 10128R, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

8 Expansion Plug parts are listed for the 1989 Eagle Summit, from PIONEER, DORMAN, QUALCAST and 1 other brand. DORMAN 555093 carries the "Popular" badge.

Listed part numbers: DORMAN 555093, DORMAN 565093 and PIONEER EPC224, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1989 Eagle Summit, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS94328 carries the "Popular" badge.

This group includes FEL-PRO MS94328, AJUSA 13088900 and APEX AMS2030 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 1989 Eagle Summit come from 3 brands — QUALCAST, SBI and TOPLINE.

This group includes QUALCAST 1010126, SBI 10126A and TOPLINE IVMI6.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts for the 1989 Eagle Summit come from 4 brands — DEA / MARMON RIDE CONTROL, WESTAR, PIONEER and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL A2673.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

27 Oil parts for the 1989 Eagle Summit come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; High Mileage (>75,000 Miles) is the most populated section, led by MOBIL and VALVOLINE.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1989 Eagle Summit.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 1989 Eagle Summit come from 4 brands — DORMAN, AGS, BECK/ARNLEY and 1 other brand. The "Popular" part is AGS ODP00007.

This group includes AGS ODP00007, DORMAN 090053 and BECK/ARNLEY 0160088 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 1989 Eagle Summit, from AJUSA, APEX, DORMAN and 1 other brand.

Part numbers include AJUSA 18001000, APEX ADP1906 and DORMAN 095141, among others listed above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 1989 Eagle Summit come from 3 brands — ACDELCO, BECK/ARNLEY and MOTORAD.

This group includes ACDELCO 12C36, BECK/ARNLEY 0160050 and MOTORAD MO88.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts for the 1989 Eagle Summit come from 12 brands — FAMOUS BRAND, FRAM, CHAMP / LUBER-FINER and 9 other brands. The "Popular" part is BOSCH 3421.

The Economy section lists 8 options from FAMOUS BRAND, CHAMP / LUBER-FINER, FRAM and 4 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH2856A is listed in this group.

Standard Replacement: 6 parts, from BOSCH, DENSO, WIX and 3 other brands. A representative part number is BOSCH 3421.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: WELLS 1S6556.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 1989 Eagle Summit, from ATP, PIONEER and SPECTRA PREMIUM.

Listed part numbers: ATP 103283, PIONEER 501020 and SPECTRA PREMIUM CRP14A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 1989 Eagle Summit come from 4 brands — VICTOR REINZ, AJUSA, APEX and 1 other brand. The "Popular" part is VICTOR REINZ 703141410.

This group includes VICTOR REINZ 703141410, AJUSA 14038100 and APEX AOP203 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: TOPLINE OPMI21.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 1989 Eagle Summit, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3454, SKF 99078 and WJB / INMOTION PARTS WS99078.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Oil Pump Seal parts are listed for the 1989 Eagle Summit, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 222025 carries the "Popular" badge.

Listed part numbers: NATIONAL 222025, BCA NS222025 and SCHAEFFLER SS3984, plus the other parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 1989 Eagle Summit — TOPLINE PAMI21.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts are listed for the 1989 Eagle Summit, from HASTINGS MANUFACTURING and TOPLINE.

Listed part numbers: HASTINGS MANUFACTURING 2C4669S, HASTINGS MANUFACTURING 2C4669 and TOPLINE RSMI21.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: TOPLINE RAMI6.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

5 Timing Belt parts are listed for the 1989 Eagle Summit, from BECK/ARNLEY, GATES, CONTINENTAL and 1 other brand. GATES T165 carries the "Popular" badge.

This group includes GATES T165, BECK/ARNLEY 0260251 and BECK/ARNLEY 0260196 and the remaining parts above.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

3 Timing Belt Pulley parts for the 1989 Eagle Summit come from 3 brands — CLOYES, GATES and GMB.

Part numbers include CLOYES 95194, GATES T41046 and GMB 4481060.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Belt Tensioner parts for the 1989 Eagle Summit come from 2 brands — TOPLINE and GMB.

Listed part numbers: GMB 4487147, TOPLINE BTC18 and TOPLINE BTMI6.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Timing Cover Seal parts for the 1989 Eagle Summit come from 3 brands — SKF, MAHLE / CLEVITE and SCHAEFFLER.

This group includes MAHLE / CLEVITE 47730, SCHAEFFLER SS2813 and SKF 17629 and the remaining parts above.

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for. Read more

5 Timing Idler parts for the 1989 Eagle Summit come from 5 brands — GMB, GATES, JAPANESE OE and 2 other brands. The "Popular" part is GMB 4481050.

This group includes GMB 4481050, GATES T42017 and JAPANESE OE PU276033RR1D and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1989 Eagle Summit come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO VS50041R.

This group includes FEL-PRO VS50041R, AJUSA 56013000 and APEX AVC203S and the remaining parts above.

This table covers the Valve Cover grommets. Read more

2 Valve Cover Grommet parts for the 1989 Eagle Summit come from BECK/ARNLEY.

Listed part numbers: BECK/ARNLEY 0396654 and BECK/ARNLEY 0396357.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

7 Valve Guide parts for the 1989 Eagle Summit come from 3 brands — SBI, QUALCAST and TOPLINE. The "Popular" part is SBI 1408194.

Listed part numbers: SBI 1408194, SBI 1408193 and QUALCAST 308194, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

4 Valve Lifter parts for the 1989 Eagle Summit come from 4 brands — MELLING, QUALCAST, SBI and 1 other brand.

This group includes MELLING JB135, QUALCAST 362274 and SBI VL135 and the remaining parts above.

This table covers the Valve seats. Read more

4 Valve Seat parts are listed for the 1989 Eagle Summit, from SBI, DURA-BOND and QUALCAST.

This group includes DURA-BOND 30809, QUALCAST 21143768 and SBI SB131264 and the remaining parts above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 1989 Eagle Summit, from PIONEER and SBI.

Listed part numbers: PIONEER PX813 and SBI 1211031.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts for the 1989 Eagle Summit come from 8 brands — FEL-PRO, SBI, APEX and 5 other brands. The "Popular" part is FEL-PRO SS70359.

Part numbers include FEL-PRO SS70359, SBI 1221114 and APEX AVS2003, among others listed above.