1992 Eagle Summit Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Balance Shaft Bearing parts for the 1992 Eagle Summit come from 4 brands — ITM ENGINE COMPONENTS, MAHLE / CLEVITE, SEALED POWER and 1 other brand.

Part numbers include ITM ENGINE COMPONENTS 3C9975, MAHLE / CLEVITE SH1469S and SEALED POWER 1810M, among others listed above.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

9 Balance Shaft Belt parts are listed for the 1992 Eagle Summit, from CONTINENTAL, CLOYES, PREFERRED COMPONENTS INC and 5 other brands. CLOYES B159 carries the "Popular" badge.

In the Economy grade, CLOYES, CONTINENTAL and PREFERRED COMPONENTS INC supply 3 parts: the catalog's value-priced group. A representative part number is CLOYES B159.

The Standard Replacement section lists 5 options from ACDELCO, CONTINENTAL, DAYCO and 2 other brands — built to original-equipment specification. ACDELCO TB159 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes CLOYES B159 and CONTINENTAL T159 and the remaining parts above.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Belt Tensioner parts for the 1992 Eagle Summit come from 6 brands — GMB, INA, JAPANESE OE and 3 other brands. The "Popular" part is GMB 4488480.

This group includes GMB 4488480, INA FT10123 and JAPANESE OE PU105719RR1DW and the remaining parts above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

3 Balance Shaft Repair Sleeve parts are listed for the 1992 Eagle Summit, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99098, SCHAEFFLER SR3458 and WJB / INMOTION PARTS WS99098.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts are listed for the 1992 Eagle Summit, from JAPANESE OE, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: JAPANESE OE KJ413209, JAPANESE OE F4225 and NATIONAL 712007, plus the other parts above.

This table covers the camshafts that open the valves. Read more

One part is listed for the 1992 Eagle Summit — TOPLINE CAMMI4L.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Camshaft Bearing parts are listed for the 1992 Eagle Summit, from DURA-BOND, KING ENGINE BEARINGS and MAHLE / CLEVITE.

Listed part numbers: DURA-BOND MIA3, DURA-BOND MIG3 and DURA-BOND MIA1, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 1992 Eagle Summit come from 6 brands — NATIONAL, BCA, SCHAEFFLER and 3 other brands. The "Popular" part is NATIONAL 99139.

Listed part numbers: NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts for the 1992 Eagle Summit come from 11 brands — FEL-PRO, NATIONAL, TIMKEN and 8 other brands. The "Popular" part is FEL-PRO TCS45483.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Circular / Semi-Circular Plug parts for the 1992 Eagle Summit come from 3 brands — APEX, FEL-PRO and VICTOR REINZ.

Listed part numbers: APEX ACP201, FEL-PRO CP75001 and VICTOR REINZ 711616600.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 1992 Eagle Summit — TOPLINE CRMI2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

15 Connecting Rod Bearing parts are listed for the 1992 Eagle Summit, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 1 other brand. MAHLE / CLEVITE CB1120A carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 6 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4481XP.

The Standard Replacement section: 6 options from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. MAHLE / CLEVITE CB1120A is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts are listed for the 1992 Eagle Summit, from APEX, AJUSA, TOPLINE and 2 other brands. APEX ACS2000 carries the "Popular" badge.

Listed part numbers: APEX ACS2000, AJUSA 54041100 and AJUSA 54042200, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Crankshaft Main Bearing parts for the 1992 Eagle Summit come from 6 brands — MAHLE / CLEVITE, SEALED POWER, ENGINE PRO and 3 other brands. The "Popular" part is MAHLE / CLEVITE MS1668P.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

10 Crankshaft Repair Sleeve parts for the 1992 Eagle Summit come from 6 brands — WJB / INMOTION PARTS, SCHAEFFLER, SKF and 3 other brands. The "Popular" part is FEL-PRO 16275.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

37 Crankshaft Seal parts for the 1992 Eagle Summit come from 15 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 12 other brands. The "Popular" part is BECK/ARNLEY 0523306. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 1992 Eagle Summit, from APEX and ELRING.

This group includes APEX AHB202 and ELRING 003930.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts are listed for the 1992 Eagle Summit, from FEL-PRO, APEX, TOPLINE and 4 other brands. BECK/ARNLEY 0351901 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 1992 Eagle Summit, from FEL-PRO, APEX, TOPLINE and 3 other brands. APEX AHS2006 carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: DORMAN 565093.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 1992 Eagle Summit.

This group includes MELLING CSL155 and MELLING CSL255.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11411.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 1992 Eagle Summit, from AJUSA, APEX and TOPLINE.

Part numbers include AJUSA 50121000, AJUSA 50122200 and APEX AFS2002, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 1992 Eagle Summit come from 3 brands — QUALCAST, TOPLINE and SBI.

Part numbers include QUALCAST 1010497, QUALCAST 1010144 and SBI 10497, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

7 Expansion Plug parts are listed for the 1992 Eagle Summit, from DORMAN, TOPLINE and PIONEER. DORMAN 555093 carries the "Popular" badge.

Part numbers include DORMAN 555093, DORMAN 565093 and DORMAN 555095, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 1992 Eagle Summit, from ATP, PIONEER, DAYCO and 1 other brand.

Part numbers include ATP 102304, ATP 102305 and DAYCO PB1260N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts are listed for the 1992 Eagle Summit, from AJUSA, FEL-PRO, APEX and 3 other brands. AJUSA 13089400 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 1992 Eagle Summit come from 4 brands — AJUSA, APEX, BECK/ARNLEY and 1 other brand.

Part numbers include AJUSA 00692500, APEX AMS2040 and BECK/ARNLEY 0374795, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 1992 Eagle Summit come from 3 brands — TOPLINE, QUALCAST and SBI.

Listed part numbers: QUALCAST 1010495, QUALCAST 1010143 and SBI 10495, plus the other parts above.

This table covers the seals at the Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 247260.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

15 Motor Mount parts for the 1992 Eagle Summit come from 4 brands — DEA / MARMON RIDE CONTROL, WESTAR, PIONEER and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL A2673.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

26 Oil parts for the 1992 Eagle Summit come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with High Mileage (>75,000 Miles) the largest group at 11 parts from MOBIL and VALVOLINE.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1992 Eagle Summit.

This group includes HAYDEN 238 and HAYDEN 153.