1991 Eagle 2000 GTX Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Balance Shaft Bearing parts are listed for the 1991 Eagle 2000 GTX, from MAHLE / CLEVITE and SEALED POWER.

Listed part numbers: MAHLE / CLEVITE SH1469S and SEALED POWER 1810M.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

10 Balance Shaft Belt parts for the 1991 Eagle 2000 GTX come from 7 brands — DAYCO, GATES, ACDELCO and 4 other brands. The "Popular" part is DAYCO 95168.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Balance Shaft Belt Tensioner parts are listed for the 1991 Eagle 2000 GTX, from GATES, GMB, INA and 1 other brand.

Listed part numbers: GATES T41047, GMB 4481070 and INA ZT95197, plus the other parts above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

4 Balance Shaft Repair Sleeve parts for the 1991 Eagle 2000 GTX come from 4 brands — NATIONAL, SCHAEFFLER, SKF and 1 other brand.

Listed part numbers: NATIONAL 99098 and SCHAEFFLER SR3458, plus the other parts above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts for the 1991 Eagle 2000 GTX come from 5 brands — NATIONAL, BCA, JAPANESE OE and 2 other brands. The "Popular" part is NATIONAL 712007.

This group includes NATIONAL 712007, BCA NS712007 and JAPANESE OE KJ413209 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CS3305BB.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 1991 Eagle 2000 GTX, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

This group includes NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Camshaft Seal parts are listed for the 1991 Eagle 2000 GTX, from FEL-PRO, NATIONAL, AJUSA and 5 other brands. FEL-PRO TCS45483 carries the "Popular" badge.

Listed part numbers: FEL-PRO TCS45483, NATIONAL 3771 and AJUSA 15013300, plus the other parts above.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Circular / Semi-Circular Plug parts are listed for the 1991 Eagle 2000 GTX, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO CP75001, FEL-PRO CP75013 and VICTOR REINZ 711349400, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts for the 1991 Eagle 2000 GTX come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and SEALED POWER. The "Popular" part is MAHLE / CLEVITE CB1120A.

The High Performance section lists 4 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4481XP is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, KING ENGINE BEARINGS and SEALED POWER supply 4 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB1120A.

Listed part numbers: MAHLE / CLEVITE CB1120A, KING ENGINE BEARINGS CR4481XP and KING ENGINE BEARINGS CR4481XPC, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 1991 Eagle 2000 GTX come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 54042200, FEL-PRO CS9086 and MAHLE / CLEVITE CS5875, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts are listed for the 1991 Eagle 2000 GTX, from KING ENGINE BEARINGS and SEALED POWER.

Listed part numbers: KING ENGINE BEARINGS MB5227AM and SEALED POWER 5103M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 1991 Eagle 2000 GTX, from BCA, FEL-PRO, SCHAEFFLER and 2 other brands. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts are listed for the 1991 Eagle 2000 GTX, from FEL-PRO, NATIONAL, AJUSA and 4 other brands. FEL-PRO TCS455651 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1991 Eagle 2000 GTX come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO ES71175 and VICTOR REINZ 141011901.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1991 Eagle 2000 GTX come from 3 brands — FEL-PRO, AJUSA and MAHLE / CLEVITE. The "Popular" part is FEL-PRO 9086PT.

Listed part numbers: FEL-PRO 9086PT, FEL-PRO 9627PT and AJUSA 10042400, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 1991 Eagle 2000 GTX come from 4 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 1 other brand. The "Popular" part is FEL-PRO HS9627PT.

Listed part numbers: FEL-PRO HS9627PT, MAHLE / CLEVITE HS5703Y and AJUSA 52075300, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1991 Eagle 2000 GTX come from AJUSA.

Listed part numbers: AJUSA 50086000 and AJUSA 50122000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 1991 Eagle 2000 GTX, from QUALCAST, MELLING and SEALED POWER.

Part numbers include MELLING V5128, QUALCAST 1010142 and QUALCAST 1010128, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 1991 Eagle 2000 GTX come from QUALCAST.

Part numbers include QUALCAST 970226 and QUALCAST 970226B.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 1991 Eagle 2000 GTX come from 3 brands — ATP, DAYCO and PIONEER.

Listed part numbers: ATP 102082, DAYCO PB1260N and PIONEER DA6005.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 1991 Eagle 2000 GTX come from 3 brands — FEL-PRO, AJUSA and VICTOR REINZ. The "Popular" part is FEL-PRO MS91657.

Listed part numbers: FEL-PRO MS91657, FEL-PRO MS94328 and AJUSA 13088900, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts are listed for the 1991 Eagle 2000 GTX, from AJUSA and FEL-PRO.

Listed part numbers: AJUSA 00692500 and FEL-PRO MS94275.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 1991 Eagle 2000 GTX, from QUALCAST, SEALED POWER and MELLING. MELLING V5126 carries the "Popular" badge.

Listed part numbers: MELLING V5126, QUALCAST 1010141 and QUALCAST 1010126, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

DEA / MARMON RIDE CONTROL supplies the 5 Motor Mount parts for the 1991 Eagle 2000 GTX. DEA / MARMON RIDE CONTROL A6142 carries the "Popular" badge.

Part numbers include DEA / MARMON RIDE CONTROL A6142, DEA / MARMON RIDE CONTROL A6610 and DEA / MARMON RIDE CONTROL A6609, among others listed above.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DEA / MARMON RIDE CONTROL supplies both parts for the 1991 Eagle 2000 GTX.

Listed part numbers: DEA / MARMON RIDE CONTROL A6195B and DEA / MARMON RIDE CONTROL A6142in.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1991 Eagle 2000 GTX come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 1991 Eagle 2000 GTX, from DORMAN, AGS and SKP. DORMAN 090053 carries the "Popular" badge.

Part numbers include DORMAN 090053, AGS ODP00007 and DORMAN 090075, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 22008900.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 1991 Eagle 2000 GTX — MOTORAD MO88.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 1991 Eagle 2000 GTX, from CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 4 other brands. BOSCH 3421 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH2856A.

The Standard Replacement section: 4 options from BOSCH, WIX, FRAM and 1 other brand. BOSCH 3421 is listed in this group.

This group includes BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381 and the remaining parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 1991 Eagle 2000 GTX come from 3 brands — ATP, PIONEER and SPECTRA PREMIUM.

Part numbers include ATP 103283, PIONEER 501020 and SPECTRA PREMIUM CRP14A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 1991 Eagle 2000 GTX, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 14038100, FEL-PRO OS30460A and MAHLE / CLEVITE OS32008, plus the other parts above.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

This group shows a single part: SCHAEFFLER SR3454.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Pump Seal parts for the 1991 Eagle 2000 GTX come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS221710, NATIONAL 221710 and SCHAEFFLER SS3984 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 1991 Eagle 2000 GTX come from SILV-O-LITE.

In the Premium grade, SILV-O-LITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SILV-O-LITE 9123H.

Standard Replacement: 1 part, from SILV-O-LITE. A representative part number is SILV-O-LITE 3217.

This group includes SILV-O-LITE 9123H and SILV-O-LITE 3217.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1991 Eagle 2000 GTX come from 3 brands — MAHLE / CLEVITE, SEALED POWER and HASTINGS MANUFACTURING. The "Popular" part is MAHLE / CLEVITE 51599CP.

Premium: 2 parts, from MAHLE / CLEVITE and SEALED POWER. A representative part number is MAHLE / CLEVITE 41599.

Standard Replacement: 3 parts, from MAHLE / CLEVITE, HASTINGS MANUFACTURING and SEALED POWER. A representative part number is MAHLE / CLEVITE 51599CP.

This group includes MAHLE / CLEVITE 51599CP, MAHLE / CLEVITE 41599 and SEALED POWER E522KC and the remaining parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

11 Timing Belt parts for the 1991 Eagle 2000 GTX come from 6 brands — GATES, BANDO, DAYCO and 3 other brands. The "Popular" part is GATES T167RB1.

The High Performance section: 2 options from GATES. GATES T167RB1 is listed in this group.

Standard Replacement: 9 parts, from GATES, BANDO, DAYCO and 3 other brands. A representative part number is GATES T167.

This table covers the Timing Belt & component kits. Read more

5 Timing Belt & Component Kit parts are listed for the 1991 Eagle 2000 GTX, from CONTINENTAL, ACDELCO, GATES and 2 other brands. CONTINENTAL TB167168K1 carries the "Popular" badge.

Part numbers include CONTINENTAL TB167168K1, ACDELCO TCKWP167 and GATES TCK167, among others listed above.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

3 Timing Belt Pulley parts are listed for the 1991 Eagle 2000 GTX, from GATES and GMB.

Part numbers include GATES T41043, GATES T41046 and GMB 4481060.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Belt Tensioner parts are listed for the 1991 Eagle 2000 GTX, from GMB, GATES, ACDELCO and 2 other brands. GATES T43215 carries the "Popular" badge.

This group includes GATES T43215 and GMB 4487147 and the remaining parts above.

This table covers the Timing Cover Dust Seal sets. Read more

One part is listed for the 1991 Eagle 2000 GTX — VICTOR REINZ 151097001.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1991 Eagle 2000 GTX — MAHLE / CLEVITE JV1036.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 1991 Eagle 2000 GTX, from MAHLE / CLEVITE and SKF.

This group includes MAHLE / CLEVITE 47730 and SKF 17629.

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for. Read more

5 Timing Idler parts are listed for the 1991 Eagle 2000 GTX, from S.A. GEAR, GMB, DAYCO and 1 other brand. GMB 4481050 carries the "Popular" badge.

Part numbers include GMB 4481050, DAYCO 84032 and GATES T42017, among others listed above.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 1991 Eagle 2000 GTX — DAYCO 87000.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts are listed for the 1991 Eagle 2000 GTX, from FEL-PRO, AJUSA, MAHLE / CLEVITE and 1 other brand. FEL-PRO VS50132R carries the "Popular" badge.

Listed part numbers: FEL-PRO VS50132R, FEL-PRO VS50041R and AJUSA 56013100, plus the other parts above.

This table covers the Valve Cover grommets. Read more

One part is listed for the 1991 Eagle 2000 GTX — VICTOR REINZ 151012801.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

9 Valve Guide parts are listed for the 1991 Eagle 2000 GTX, from QUALCAST and SEALED POWER. QUALCAST 308194 carries the "Popular" badge.

Listed part numbers: QUALCAST 308194, QUALCAST 307574 and QUALCAST 307575, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

6 Valve Lifter parts are listed for the 1991 Eagle 2000 GTX, from MELLING, QUALCAST, AJUSA and 1 other brand. MELLING JB2250 carries the "Popular" badge.

Part numbers include MELLING JB2250, MELLING JB135 and AJUSA 85004400, among others listed above.

This table covers the Valve seats. Read more

This group shows a single part: QUALCAST 21175061.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: QUALCAST 321289.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: QUALCAST 34716.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 1991 Eagle 2000 GTX, from FEL-PRO, QUALCAST and VICTOR REINZ. FEL-PRO SS70359 carries the "Popular" badge.

Listed part numbers: FEL-PRO SS70359, FEL-PRO SS72630 and QUALCAST 3896455, plus the other parts above.