1992 Eagle 2000 GTX Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Balance Shaft Bearing parts for the 1992 Eagle 2000 GTX come from 2 brands — MAHLE / CLEVITE and SEALED POWER.

Part numbers include MAHLE / CLEVITE SH1469S and SEALED POWER 1810M.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

8 Balance Shaft Belt parts are listed for the 1992 Eagle 2000 GTX, from GATES, ACDELCO, BECK/ARNLEY and 3 other brands. GATES T159 carries the "Popular" badge.

Part numbers include GATES T159, GATES T168 and ACDELCO TB159, among others listed above.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Balance Shaft Belt Tensioner parts for the 1992 Eagle 2000 GTX come from 4 brands — GATES, GMB, INA and 1 other brand.

Listed part numbers: GATES T41047, GMB 4481070 and INA ZT95197, plus the other parts above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

4 Balance Shaft Repair Sleeve parts are listed for the 1992 Eagle 2000 GTX, from NATIONAL, SCHAEFFLER, SKF and 1 other brand.

Part numbers include NATIONAL 99098 and SCHAEFFLER SR3458, among others listed above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Balance Shaft Seal parts are listed for the 1992 Eagle 2000 GTX, from NATIONAL, BCA, JAPANESE OE and 2 other brands. NATIONAL 712007 carries the "Popular" badge.

Part numbers include NATIONAL 712007, BCA NS712007 and JAPANESE OE KJ413209, among others listed above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1992 Eagle 2000 GTX — KING ENGINE BEARINGS CS3305BB.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 1992 Eagle 2000 GTX come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Camshaft Seal parts for the 1992 Eagle 2000 GTX come from 8 brands — FEL-PRO, NATIONAL, AJUSA and 5 other brands. The "Popular" part is FEL-PRO TCS45483.

This group includes FEL-PRO TCS45483, NATIONAL 3771 and AJUSA 15013300 and the remaining parts above.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Circular / Semi-Circular Plug parts for the 1992 Eagle 2000 GTX come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO CP75001, FEL-PRO CP75013 and VICTOR REINZ 711349400, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts are listed for the 1992 Eagle 2000 GTX, from MAHLE / CLEVITE, KING ENGINE BEARINGS and SEALED POWER. MAHLE / CLEVITE CB1120A carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 6 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4481XP.

The Standard Replacement section lists 5 options from MAHLE / CLEVITE, KING ENGINE BEARINGS and SEALED POWER — built to original-equipment specification. MAHLE / CLEVITE CB1120A is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 1992 Eagle 2000 GTX, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 54042200, FEL-PRO CS9086 and MAHLE / CLEVITE CS5875, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 1992 Eagle 2000 GTX come from 3 brands — MAHLE / CLEVITE, SEALED POWER and KING ENGINE BEARINGS. The "Popular" part is MAHLE / CLEVITE MS2039P.

The High Performance section: 1 option from MAHLE / CLEVITE. MAHLE / CLEVITE MS2039H is listed in this group.

Standard Replacement: 4 parts, from SEALED POWER, MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is MAHLE / CLEVITE MS2039P.

Part numbers include MAHLE / CLEVITE MS2039P, MAHLE / CLEVITE MS2039H and KING ENGINE BEARINGS MB5227AM, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1992 Eagle 2000 GTX come from 5 brands — BCA, FEL-PRO, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NS99315.

This group includes BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3549 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts for the 1992 Eagle 2000 GTX come from 7 brands — FEL-PRO, NATIONAL, AJUSA and 4 other brands. The "Popular" part is FEL-PRO TCS455651.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 1992 Eagle 2000 GTX, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO ES71175 and VICTOR REINZ 141011901.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 1992 Eagle 2000 GTX, from FEL-PRO, AJUSA and MAHLE / CLEVITE. FEL-PRO 9086PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 9086PT, FEL-PRO 9627PT and AJUSA 10042400, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 1992 Eagle 2000 GTX, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 1 other brand. FEL-PRO HS9627PT carries the "Popular" badge.

This group includes FEL-PRO HS9627PT, MAHLE / CLEVITE HS5703Y and AJUSA 52075300 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 1992 Eagle 2000 GTX.

Part numbers include AJUSA 50086000 and AJUSA 50122000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 1992 Eagle 2000 GTX come from 3 brands — MELLING, QUALCAST and SEALED POWER.

Listed part numbers: MELLING V5128, QUALCAST 1010128 and SEALED POWER V2653N.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

QUALCAST supplies both parts for the 1992 Eagle 2000 GTX.

Part numbers include QUALCAST 970226 and QUALCAST 970226B.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 1992 Eagle 2000 GTX, from ATP, DAYCO and PIONEER.

This group includes ATP 102082, DAYCO PB1260N and PIONEER DA6005.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 1992 Eagle 2000 GTX, from FEL-PRO, AJUSA and VICTOR REINZ. FEL-PRO MS91657 carries the "Popular" badge.

Part numbers include FEL-PRO MS91657, FEL-PRO MS94328 and AJUSA 13088900, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 1992 Eagle 2000 GTX come from 2 brands — AJUSA and FEL-PRO.

This group includes AJUSA 00692500 and FEL-PRO MS94275.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 1992 Eagle 2000 GTX come from 3 brands — MELLING, QUALCAST and SEALED POWER.

This group includes MELLING V5126, QUALCAST 1010126 and SEALED POWER V2652N.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts for the 1992 Eagle 2000 GTX come from DEA / MARMON RIDE CONTROL. The "Popular" part is DEA / MARMON RIDE CONTROL A6142.

This group includes DEA / MARMON RIDE CONTROL A6142, DEA / MARMON RIDE CONTROL A6609 and DEA / MARMON RIDE CONTROL A6610 and the remaining parts above.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Motor Mount Bushing parts for the 1992 Eagle 2000 GTX come from DEA / MARMON RIDE CONTROL.

Part numbers include DEA / MARMON RIDE CONTROL A6195B and DEA / MARMON RIDE CONTROL A6142in.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1992 Eagle 2000 GTX.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 1992 Eagle 2000 GTX come from 3 brands — DORMAN, AGS and SKP. The "Popular" part is DORMAN 090053.

Part numbers include DORMAN 090053, AGS ODP00007 and DORMAN 090075, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1992 Eagle 2000 GTX — AJUSA 22008900.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO88.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts for the 1992 Eagle 2000 GTX come from 7 brands — CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 4 other brands. The "Popular" part is BOSCH 3421.

The Economy section lists 3 options from CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR — the catalog's value-priced group. CHAMP / LUBER-FINER PH2856A is listed in this group.

Standard Replacement: 4 parts, from BOSCH, WIX, FRAM and 1 other brand. A representative part number is BOSCH 3421.

Listed part numbers: BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381, plus the other parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 1992 Eagle 2000 GTX, from ATP, PIONEER and SPECTRA PREMIUM.

Listed part numbers: ATP 103283, PIONEER 501020 and SPECTRA PREMIUM CRP14A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 1992 Eagle 2000 GTX come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes AJUSA 14038100, FEL-PRO OS30460A and MAHLE / CLEVITE OS32008 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 1992 Eagle 2000 GTX come from 2 brands — SKP and MELLING.

The Economy section: 1 option from SKP. SKP SKOM198 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING M198.

This group includes SKP SKOM198 and MELLING M198.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

One part is listed for the 1992 Eagle 2000 GTX — SCHAEFFLER SR3454.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Pump Seal parts are listed for the 1992 Eagle 2000 GTX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS221710, NATIONAL 221710 and SCHAEFFLER SS3984 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

SILV-O-LITE supplies both parts for the 1992 Eagle 2000 GTX.

The Premium section lists 1 option from SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SILV-O-LITE 9123H is listed in this group.

The Standard Replacement section: 1 option from SILV-O-LITE. SILV-O-LITE 3217 is listed in this group.

This group includes SILV-O-LITE 9123H and SILV-O-LITE 3217.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts are listed for the 1992 Eagle 2000 GTX, from MAHLE / CLEVITE, SEALED POWER and HASTINGS MANUFACTURING. MAHLE / CLEVITE 51599CP carries the "Popular" badge.

The Premium section: 3 options from MAHLE / CLEVITE and SEALED POWER. MAHLE / CLEVITE 41599 is listed in this group.

The Standard Replacement section: 2 options from MAHLE / CLEVITE and HASTINGS MANUFACTURING. MAHLE / CLEVITE 51599CP is listed in this group.

Listed part numbers: MAHLE / CLEVITE 51599CP, MAHLE / CLEVITE 41599 and MAHLE / CLEVITE 41692, plus the other parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

8 Timing Belt parts are listed for the 1992 Eagle 2000 GTX, from GATES, ACDELCO, BECK/ARNLEY and 2 other brands. GATES T167RB1 carries the "Popular" badge.

High Performance: 2 parts, from GATES. A representative part number is GATES T167RB1.

The Standard Replacement section: 6 options from GATES, ACDELCO, BECK/ARNLEY and 2 other brands. GATES T167 is listed in this group.

Listed part numbers: GATES T167RB1, GATES T167RB and GATES T167, plus the other parts above.

This table covers the Timing Belt & component kits. Read more

5 Timing Belt & Component Kit parts for the 1992 Eagle 2000 GTX come from 5 brands — CONTINENTAL, ACDELCO, GATES and 2 other brands. The "Popular" part is CONTINENTAL TB167168K1.

This group includes CONTINENTAL TB167168K1, ACDELCO TCKWP167 and GATES TCK167 and the remaining parts above.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

3 Timing Belt Pulley parts for the 1992 Eagle 2000 GTX come from 2 brands — GATES and GMB.

Part numbers include GATES T41043, GATES T41046 and GMB 4481060.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Belt Tensioner parts for the 1992 Eagle 2000 GTX come from 5 brands — GMB, GATES, ACDELCO and 2 other brands. The "Popular" part is GATES T43215.

Part numbers include GATES T43215 and GMB 4487147, among others listed above.

This table covers the Timing Cover Dust Seal sets. Read more

This group shows a single part: VICTOR REINZ 151097001.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV1036.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 1992 Eagle 2000 GTX come from 2 brands — MAHLE / CLEVITE and SKF.

Listed part numbers: MAHLE / CLEVITE 47730 and SKF 17629.

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for. Read more

6 Timing Idler parts for the 1992 Eagle 2000 GTX come from 5 brands — S.A. GEAR, GATES, GMB and 2 other brands. The "Popular" part is GATES T42017.

Part numbers include GATES T42017 and GMB 4481050, among others listed above.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: DAYCO 87000.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 1992 Eagle 2000 GTX come from 4 brands — FEL-PRO, AJUSA, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO VS50132R.

Part numbers include FEL-PRO VS50132R, FEL-PRO VS50041R and AJUSA 56013100, among others listed above.

This table covers the Valve Cover grommets. Read more

This group shows a single part: VICTOR REINZ 151012801.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 1992 Eagle 2000 GTX come from 2 brands — QUALCAST and SEALED POWER.

Part numbers include QUALCAST 308194, QUALCAST 308193 and SEALED POWER VG903.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

4 Valve Lifter parts for the 1992 Eagle 2000 GTX come from 3 brands — MELLING, AJUSA and QUALCAST.

This group includes AJUSA 85004400, MELLING JB2250 and MELLING JB135 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts for the 1992 Eagle 2000 GTX come from 4 brands — AJUSA, FEL-PRO, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO SS72630.

This group includes FEL-PRO SS72630, FEL-PRO SS70359 and AJUSA 12015100 and the remaining parts above.