1991 Eagle Summit Automatic Transmission Parts

This table covers the control units that command automatic-transmission shifts. Read more

2 Automatic Transmission Control Unit (TCU) parts are listed for the 1991 Eagle Summit, from BSE and CARDONE.

This group includes BSE TCM458 and CARDONE 7380039.

This table covers the apply bands inside the automatic transmission. Read more

One part is listed for the 1991 Eagle Summit — PA CARGO 42700.

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 1991 Eagle Summit come from 2 brands — PA CARGO and PIONEER.

This group includes PA CARGO K42901D and PIONEER 754021.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

17 Filter parts for the 1991 Eagle Summit come from 10 brands — ATP, FAMOUS BRAND, PUROLATOR and 7 other brands. The "Popular" part is ATP JX150.

The Economy section lists 9 options from FAMOUS BRAND, PUROLATOR, ATP and 4 other brands — the catalog's value-priced group. ATP TF97 is listed in this group.

In the Standard Replacement grade, ATP, PIONEER, BECK/ARNLEY and 1 other brand supply 8 parts: built to original-equipment specification. A representative part number is ATP JX150.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts are listed for the 1991 Eagle Summit, from ATP and PIONEER.

Listed part numbers: ATP Z424 and PIONEER FRA474.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts for the 1991 Eagle Summit come from 2 brands — ATP and PIONEER. The "Popular" part is ATP TG107.

Part numbers include ATP TG107, ATP TG103 and ATP TG101, among others listed above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 1991 Eagle Summit, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 1991 Eagle Summit, from ATP, PIONEER and SKF.

Part numbers include ATP TO35, PIONEER 759041 and SKF 16897.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts for the 1991 Eagle Summit come from 5 brands — NATIONAL, BCA, SKF and 2 other brands. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139 and BCA NS99139, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Output Shaft Seal parts for the 1991 Eagle Summit come from 8 brands — SCHAEFFLER, SKF, TIMKEN and 5 other brands. The "Popular" part is SKF 14006.

Listed part numbers: SKF 14006, TIMKEN 223543 and ATP TO36, plus the other parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Pressure Control (EPC) Solenoid parts for the 1991 Eagle Summit come from 2 brands — PIONEER and ROSTRA.

This group includes PIONEER 771034, PIONEER 772050 and ROSTRA 520262.

This table covers the rebuild kits for this assembly. Read more

PIONEER supplies the 6 Rebuild Kit parts for the 1991 Eagle Summit. PIONEER 750062 carries the "Popular" badge.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PIONEER supplies 1 part: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 751051.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 2 options from PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PIONEER 752069 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PIONEER supplies 3 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 750062.

This group includes PIONEER 750062, PIONEER 751051 and PIONEER 752069 and the remaining parts above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Shift Solenoid parts are listed for the 1991 Eagle Summit, from ROSTRA, PIONEER and ATP.

The Single Solenoid section lists 2 options from PIONEER and ROSTRA — grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. PIONEER 771033 is listed in this group.

The Solenoid Pack / Kit section lists 1 option from ROSTRA — grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. ROSTRA 529009 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: PIONEER 771033, ROSTRA 520258 and ROSTRA 529009, plus the other parts above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING CT121.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Torque Converter Clutch Solenoid parts for the 1991 Eagle Summit come from 2 brands — ATP and ROSTRA.

Listed part numbers: ATP TE28, ATP NE16 and ROSTRA 520260.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

5 Torque Converter Repair Sleeve parts are listed for the 1991 Eagle Summit, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 99157 carries the "Popular" badge.

Part numbers include NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483, among others listed above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Torque Converter Shaft Seal parts are listed for the 1991 Eagle Summit, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 320583 carries the "Popular" badge.

This group includes NATIONAL 320583, BCA NS320583 and SCHAEFFLER SS3759 and the remaining parts above.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Shaft Bearing parts are listed for the 1991 Eagle Summit, from SCHAEFFLER, WJB / INMOTION PARTS, NATIONAL and 2 other brands. NATIONAL 30207 carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT30207.

The Standard Replacement section: 5 options from SCHAEFFLER, NATIONAL, TIMKEN and 1 other brand. NATIONAL 30207 is listed in this group.

Listed part numbers: NATIONAL 30207 and WJB / INMOTION PARTS WT30207, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

4 Transmission Fluid parts for the 1991 Eagle Summit come from 2 brands — VALVOLINE and MOBIL.

This group includes MOBIL 126505, VALVOLINE VV3246 and VALVOLINE 773775 and the remaining parts above.

This table covers the conditioners and additives used with this transmission fluid. Read more

9 Transmission Fluid Additive parts for the 1991 Eagle Summit come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts are listed for the 1991 Eagle Summit, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 8584, DEA / MARMON RIDE CONTROL A6624 and PIONEER 608584, plus the other parts above.