1992 Eagle Summit Automatic Transmission Parts

This table covers the control units that command automatic-transmission shifts. Read more

This group shows a single part: CARDONE 7380039.

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: PA CARGO 42700.

This table covers the Bushing kits. Read more

One part is listed for the 1992 Eagle Summit — PA CARGO K42901D.

This table covers the wear sleeves used to restore a Extension Housing seal surface. Read more

2 Extension Housing Repair Sleeve parts for the 1992 Eagle Summit come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99128 and WJB / INMOTION PARTS WS99128.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: WJB / INMOTION PARTS WS710317.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

20 Filter parts are listed for the 1992 Eagle Summit, from ATP, BECK/ARNLEY, PIONEER and 7 other brands. ATP JX150 carries the "Popular" badge.

In the Economy grade, FAMOUS BRAND, PUROLATOR, CHAMP / LUBER-FINER and 3 other brands supply 8 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER T621.

The Standard Replacement section lists 12 options from ATP, BECK/ARNLEY, PIONEER and 1 other brand — built to original-equipment specification. ATP JX150 is listed in this group.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts for the 1992 Eagle Summit come from 2 brands — ATP and PIONEER.

This group includes ATP Z424 and PIONEER FRA474.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 1992 Eagle Summit, from ATP, PIONEER and MAHLE / CLEVITE. ATP TG103 carries the "Popular" badge.

Listed part numbers: ATP TG103, ATP TG101 and MAHLE / CLEVITE W28798, plus the other parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 1992 Eagle Summit come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 1992 Eagle Summit come from 3 brands — ATP, PIONEER and SKF.

Listed part numbers: ATP TO35, PIONEER 759041 and SKF 16897.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Input Shaft Seal parts for the 1992 Eagle Summit come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS223014, NATIONAL 223014 and WJB / INMOTION PARTS WS223014.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts are listed for the 1992 Eagle Summit, from NATIONAL, BCA, SKF and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Part numbers include NATIONAL 99139 and BCA NS99139, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Output Shaft Seal parts are listed for the 1992 Eagle Summit, from WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 5 other brands. SKF 14006 carries the "Popular" badge.

This table covers the seals at the Pinion. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Pinion Seal parts are listed for the 1992 Eagle Summit, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99114 and WJB / INMOTION PARTS WS99114.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Pressure Control (EPC) Solenoid parts are listed for the 1992 Eagle Summit, from PIONEER and ROSTRA.

Part numbers include PIONEER 771034, PIONEER 772050 and ROSTRA 520262.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts for the 1992 Eagle Summit come from PIONEER.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 2 options from PIONEER — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PIONEER 751051 is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PIONEER supplies 2 parts: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 752069.

This group includes PIONEER 751051, PIONEER 751053 and PIONEER 752069 and the remaining parts above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Shift Solenoid parts for the 1992 Eagle Summit come from 2 brands — ROSTRA and ATP.

In the Single Solenoid grade, ROSTRA supplies 1 part: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is ROSTRA 520258.

In the Solenoid Pack / Kit grade, ROSTRA supplies 1 part: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is ROSTRA 529009.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes ROSTRA 520258, ROSTRA 529009 and ATP NE18.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 1992 Eagle Summit — TC REMANUFACTURING CT121.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Torque Converter Clutch Solenoid parts are listed for the 1992 Eagle Summit, from ATP and ROSTRA.

This group includes ATP TE28, ATP NE16 and ROSTRA 520260.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

5 Torque Converter Repair Sleeve parts for the 1992 Eagle Summit come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99157.

Part numbers include NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483, among others listed above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Torque Converter Shaft Seal parts for the 1992 Eagle Summit come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 320583.

This group includes NATIONAL 320583, BCA NS320583 and SCHAEFFLER SS3759 and the remaining parts above.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Shaft Bearing parts for the 1992 Eagle Summit come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT30207 is listed in this group.

Standard Replacement: 3 parts, from BCA, NATIONAL and TIMKEN. A representative part number is BCA NB30207.

Part numbers include WJB / INMOTION PARTS WT30207, BCA NB30207 and NATIONAL 30207, among others listed above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

4 Transmission Fluid parts are listed for the 1992 Eagle Summit, from VALVOLINE and MOBIL.

Part numbers include MOBIL 126505, VALVOLINE VV3246 and VALVOLINE 773775, among others listed above.

This table covers the conditioners and additives used with this transmission fluid. Read more

9 Transmission Fluid Additive parts are listed for the 1992 Eagle Summit, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Transmission Mount parts for the 1992 Eagle Summit come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 8584, ANCHOR 8881 and DEA / MARMON RIDE CONTROL A6624, plus the other parts above.